First principles band structure of interacting phosphorus and boron/aluminum δ \delta -doped layers in silicon

Quinn T. Campbell, Andrew D. Baczewski, Shashank Misra, Evan M. Anderson · 2025

Read First principles band structure of interacting phosphorus and boron/aluminum δ \delta -doped layers in silicon by Quinn T. Campbell, Andrew D. Baczewski, Shashank Misra, Evan M. Anderson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-19205.txt.

Introduction

Silicon can be doped in sheets a single atom thick, and Quinn T. Campbell and three co-authors compute what happens when two such sheets of opposite type interact. One sheet uses phosphorus, which donates electrons. The other uses boron or aluminum, which accept them. Using density functional theory, the team varies the distance between the sheets and calculates the electronic structure at each gap.

At separations of a nanometer or less, the two dopant potentials overlap and largely cancel, leaving behavior much like pure silicon. Beyond that distance the sheets act independently, like a p-n diode with a plain silicon layer between them. Charge can still tunnel across at larger gaps, and the tunneling chance exceeds that of a standard silicon barrier. Interacting atomic layers of this kind could form the basis of ultra-small devices.

Catalog record

CREATORQuinn T. Campbell, Andrew D. Baczewski, Shashank Misra, Evan M. Anderson
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE36 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-19205

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

First principles band structure of interacting phosphorus and boron/aluminum δ \delta -doped layers in silicon Quinn T. Campbell, Andrew D. Baczewski, Shashank Misra, Evan M. Anderson Abstract Silicon can be heavily doped with phosphorus in a single atomic layer (a δ \delta layer), significantly altering the electronic structure of the conduction bands within the material. Recent progress has also made it possible to further dope silicon with acceptor-based δ \delta layers using either boron or aluminum, making it feasible to create devices with interacting δ \delta layers with opposite polarity. It is not known, however, how these δ \delta layers will interact, particularly at small separation distances. Using Density Functional Theory, we calculate the electronic structure of a phosphorus-based δ \delta layer interacting with a boron or aluminum δ \delta layer, varying the distances between the δ \delta layers. At separations 10 Å and smaller, the dopant potentials overlap and largely cancel each other out, leading to an electronic structure closely mimicking bulk silicon. At separations greater than 10 Å, the two layers behave independently of one another, forming a p-n diode with an intrinsic layer taking the place of the depletion region. One mechanism for charge transfer between δ \delta layers at larger distances could be tunneling, where we see a greater than 3% probability for tunneling between a phosphorus and boron layer at 20 Å separation. This tunneling rate exceeds what would be seen for a standard silicon 1.1 eV triangular barrier, indicating that the interaction between delta layers creates enhanced tunneling at larger separation distances compared to a traditional junction. These calculations provide a foundation for the design of silicon-based electronics based on interacting δ \delta layers. I Introduction Atomic precision advanced manufacturing (APAM) Ward et al. 2020 ; Schofield et al. 2025 makes it possible to place dopant atoms in silicon with single-atom precision Fuechsle et al. 2010 ; Fuechsle et al. 2012 and concentrations beyond the solid-solubility limit Rueß et al. 2007 with small width, i.e. \delta layers. This fabrication technology has been investigated for use in applications ranging from quantum computing and analog simulation to more conventional digital electronics. Gao et al. 2020 ; Halsey et al. 2022 ; Wang et al. 2022 ; Jones et al. 2023 ; Schofield et al. 2025 ; Anderson et al. 2025 ; Lu et al. 2021 ; Gao et al. 2021 While APAM was originally developed for placing n -type dopants (principally phosphorus, but arsenic too Stock et al. 2020 ), recent progress has included a better understanding of surface chemistries involving acceptor-bearing precursors and even the fabrication of devices with p -type dopants. Škereň et al. 2018 ; Radue et al. 2021 ; Campbell et al. 2021 ; Campbell et al. 2022a ; Dwyer et al. 2021 ; Campbell et al. 2022b This raises the possibility of creating bipolar electronic devices entirely in silicon using both donor and acceptor based APAM processes on the same system. There are, however, relatively few explorations of the electronic structure of silicon subject to both n - and p -type APAM doping. Škereň et al. 2020 ; Mendez et al. 2025 For the creation of devices based on bipolar stacks of \delta layers, it is important to understand how the electronic structure of these \delta layers would interact, particularly at small separation distances. One intriguing possibility is that the induced conduction bands near the center of the Brillouin zone from the P \delta -layer will have their charge compensated by the induced valence bands from the B \delta -layer, moving the Fermi level into the band gap and creating a direct gap semiconductor within silicon. Conversely, the relevant defect potentials may interfere with one another, producing an electronic structure more closely resembling that of traditional silicon. This possibility strongly affects the understanding of tunneling in bipolar devices, where it is important to understand the conditions that enhance or suppress tunneling. Prior theoretical work on the electronic structure of \delta -layers used Density Functional Theory (DFT) and primarily focused on calculating the band structure of individual \delta layers. DFT has been used to predict the electronic structure of phosphorus \delta layers in silicon, Carter et al. 2009 ; Carter et al. 2011 ; Drumm et al. 2013a ; Drumm et al. 2013b with essential features of these predictions subsequently confirmed experimentally. Miwa et al. 2013 ; Mazzola et al. 2014a ; Mazzola et al. 2014b ; Miwa et al. 2014 ; Mazzola et al. 2018 ; Holt et al. 2020 ; Katzenmeyer et al. 2020 ; Young et al. 2023 Together, these investigations showed that phosphorus \delta layers introduce a metallic impurity band below the bulk conduction band edge. A similar convergence between DFT calculation and experimental characterization was also recently observed for Sb \delta layers. Strand et al. 2025 Recently, Campbell et al. have analyzed DFT band structures for \delta layers comprised of boron or aluminum. Campbell et al. 2023 They reported a similar, but inverted change in the band structure, in which an impurity band is formed above the bulk valence band edge and the Fermi level is located within these bands. The success of DFT in describing the electronic structure of \delta -doped layers suggests that extending this methodology to include the interaction of donor and acceptor \delta -doped layers will provide a useful first approximation of the electronic structure of multiple \delta -doped layered structures. In this manuscript, we use DFT to predict the electronic structure and local density of states of interacting phosphorus and boron/aluminum \delta -doped layers in silicon. We use the strongly constrained and appropriately normed (SCAN) exchange-correlation functional Sun et al. 2015 as a reasonable compromise between the computational cost of more accurate treatments of screened exchange (e.g., hybrid functionals) and the inaccuracy of more simplistic semilocal treatments. Our calculations predict that each layer creates a \delta potential that hosts an impurity band, with the opposite charges compensating and mutually reducing the binding energies relative to the band edges. The extent to which the binding energies of the impurity bands are reduced is a function of the distance between the \delta layers. At smaller separation distances < 10 Å, the two \delta -layers largely compensate each other and the electronic structure most closely resembles that of bulk silicon, making a direct gap unlikely. At distances > 10 Å, the two layers become essentially independent. At these larger distances, the \delta layers form a p-n junction with an intrinsic layer of silicon comprising the depletion region. We use the local potentials calculated within DFT to estimate the interlayer tunneling probability as a function of the separation between layers. It is enhanced relative to the tunneling probability for a triangular barrier with a height of the intrinsic silicon band gap (1.1 eV), indicating that interactions between the \delta layers do lead to outcomes that would not be achieved with traditional diodes. II Methods All of our calculations are based on 2 \times 1 Si(100) slabs (using the cubic unit cell as our base), as seen in Fig. 1 a. Two \delta -doped layers are placed within the silicon at 1/4 monolayer coverage. Within these layers, all dopant atoms are placed substitutionally. The rest of the

Read the complete text