Stability and optical quality of liquid crystal films as high repetition rate plasma mirrors in staged laser-plasma accelerators

A. Vazquez, A. Jewell, M. Cole, A. Abdi, T. K. Le, A. McIlvenny, N. Czapla, A. J. Gonsalves, K. Nakamura, D. W. Schumacher, Z. Eisentraut, C. B. Schroeder, J. van Tilborg, J. Osterhoff, E. Esarey, L. Obst-Huebl · 2025

Read Stability and optical quality of liquid crystal films as high repetition rate plasma mirrors in staged laser-plasma accelerators by A. Vazquez, A. Jewell, M. Cole, A. Abdi, T. K. Le, A. McIlvenny, N. Czapla, A. J. Gonsalves, K. Nakamura, D. W. Schumacher, Z. Eisentraut, C. B. Schroeder, J. van Tilborg, J. Osterhoff, E. Esarey, L. Obst-Huebl (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-18448.txt.

Introduction

Intense laser shots destroy the mirror that reflects them, so some labs use films that can be remade after each shot. A. Vazquez and 18 co-authors study films of a liquid crystal called 8CB for such plasma mirrors. Their 2025 paper tests a windmill device that forms fresh films over an opening. The goal is a steady rate of shots with stable aim.

The team measured film quality with low-power light and tracked how steady the films were from shot to shot. At slow forming speeds, over 97 percent of films formed well. At four times that speed, success fell to 45 percent. In the best zones, the added surface error stayed very small. In the ideal temperature band, aim wobble stayed at or below a tight bound. The best forming rate reached about one film every four seconds. The results guide the next design round.

Catalog record

CREATORA. Vazquez, A. Jewell, M. Cole, A. Abdi, T. K. Le, A. McIlvenny, N. Czapla, A. J. Gonsalves, K. Nakamura, D. W. Schumacher, Z. Eisentraut, C. B. Schroeder, J. van Tilborg, J. Osterhoff, E. Esarey, L. Obst-Huebl
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-18448

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Stability and optical quality of liquid crystal films as high repetition rate plasma mirrors in staged laser-plasma accelerators Preprint: AIP/123-QED A. Vazquez, A. Jewell, M. Cole, A. Abdi, T. K. Le, A. McIlvenny, N. Czapla, A. J. Gonsalves, K. Nakamura, D. W. Schumacher, Z. Eisentraut, C. B. Schroeder, J. van Tilborg, J. Osterhoff, E. Esarey, L. Obst-Huebl Abstract Staging multiple laser-plasma accelerators (LPAs), each driven by its own laser pulse, is a promising technique for reaching higher particle energies than achievable in a single LPA. However, introducing subsequent laser pulses for post-acceleration in staged LPA geometries presents a significant challenge for conventional optics. Due to the focused, high-intensity nature of the laser beam interacting with the electron beam, the fluence on the coupling mirror surpasses the damage threshold of any solid-state optic. Replenishable plasma mirrors (PMs) offer a promising solution to this inherent restriction from high-energy pulses; however, they require a high stability and optical quality, and need to be produced at high repetition rates that match the needs to the staging experiment. Here, we investigate the properties of 4-octyl-4’-cyanobiphenyl (8CB) liquid crystal (LC) films, produced with our new "windmill" film formation device, for this application. We conduct this investigation by observing the reliability of film formation at high repetition rates, characterizing the reflected beam profile, and pointing stability as a function of temperature and film formation speed, including film flatness and surface quality, using low-power laser reflection measurements. Our measurements demonstrate that 8CB LC films exhibit unprecedented microscopic surface quality, crucial for preserving laser pulse properties upon reflection. We also show consistent film formation suitable for operation up to 0.5 Hz with great film to film angular stability. The results allow us to conclude that 8CB LC films hold significant potential as reliable and cost-effective PMs that are suitable for coupling LPA stages. I Introduction: Modern high-power laser facilities Danson 2019 can commonly achieve intensities greater than 10^{21} W/cm 2 , with state-of-the-art systems such as the multi-petawatt laser at CoReLS Yoon 2021 recently demonstrating intensities exceeding 10^{23} W/cm 2 . High power lasers are used in the development of novel laser-plasma accelerators (LPAs) Tajima and Dawson 1979 ; Esarey 2009 . To achieve the multi-10 GeV electron energies required for many applications, LPAs can employ multistage coupling , where the electron beam from one LPA is injected into a subsequent, independently laser-driven stage Steinke 2016 . Coupling stages allow for these higher output energies to be achieved, as opposed to the limited output energy that only a single LPA stage can produce. A critical challenge in realizing LPA staging lies in the need to introduce additional, high-intensity laser pulses for post-acceleration into the tight interaction geometry of the subsequent LPA stage. For this crucial inter-stage coupling, the focused, ultra-high intensity of the added laser pulses subjects conventional optical components to laser fluences far beyond their damage threshold. To overcome this inherent restriction and enable robust inter-stage coupling, plasma mirrors (PMs) have emerged as a promising solution Thaury 2007 ; Sokollik 2010 . A PM typically consists of a solid state substrate, the surface of which rapidly ionizes upon the arrival of the laser pulse, transforming into a highly reflective plasma Obst 2018 . This mechanism allows the PM to reflect at least 50% of the beam energy. However, after this interaction of a high intensity pulse with a PM, its respective region of plasma formation used is completely destroyed and needs to be replaced. In the multi-Gev staging experiment at the BELLA Center’s Petawatt (BELLA PW) laser facility Nakamura 2017 , a laser pulse from the first beamline drives the first LPA , producing a GeV-class electron bunch Leemans et al. 2006 . This bunch is transported by an active plasma lens van Tilborg 2015 and passes through a PM before entering the second LPA stage. An additional laser pulse from a second beamline Picksley 2022 is coupled via the reflection of the PM onto the electron beam axis to drive the second LPA stage and further accelerate the electron bunch to multi-GeV energies Stackhouse 2022 ; Sokollik 2010 . The performance of this second acceleration stage will depend strongly on the optical quality of the PM as well as the alignment of the coupled pulse. In order to enable continuous, uninterrupted experimental PM operation at the pulse repetition rate of the laser (1 Hz for the BELLA PW), systems rely on tape drives (e.g. VHS tapes of 15 µm thickness) that are moved to a fresh, undamaged location after each shot Barber 2020 ; Shaw 2016 . Previous work at the BELLA Center demonstrated that tape drives are a practical solution for staging requirements, where at an intensity of 4 \text{x}10^{17} W/cm 2 at the tape surface, the wavefront quality of the reflected pulse was conserved with a peak reflectance of 82% Shaw 2016 . However, utilizing a tape drive in staging poses risks to the safety of the surrounding equipment due to the high amount of debris that is generated on each shot, and reduces electron bunch quality due to emittance growth as the bunch travels through the tape PM Zingale 2021 . For these reasons, current PM technology presents a considerable challenge for the sustained operation of high-power, high-repetition-rate LPA systems. While thin film PMs delivered via a tape drive (e.g., 15 µm thick VHS tape) have served as a practical solution for meeting high-fluence redirection and replenishment requirements in staging experiments Sokollik 2010 ; Shaw 2016 , they present significant limitations for optimal staged LPA performance. A primary concern is the inherent thickness of these films, which, even at 15-20 µm, leads to significant electron beam emittance degradation due to Coulomb scattering, severely impacting overall beam quality and the efficiency of multi-stage coupling of LPAs Zingale 2021 ; van Tilborg 2015 . This thickness also contributes to a significant amount of debris production that can damage surrounding optics and stages in the long-term. For the staging experiment at the BELLA PW, the PM formation device used to couple in the second laser pulse needs to fulfill several essential tasks for directing the additional laser pulse and electron bunch to the subsequent LPA stage: 1. The PM formation device needs to be able to replenish PMs at high repetition rates (1 Hz at the BELLA PW) with low debris production after each interaction. 2. The produced PM needs to be as thin as possible to minimize emittance growth of an electron bunch as it passes through. 3. The PMs should minimize additional aberrations to the reflected laser pulses, meaning they should not add significantly to the inherent ~40 nm wavefront root-mean-square (RMS) error of the BELLA PW laser pulse Picksley 2022 . 4. The orientation of each new PM surface should be stable from film to film in order to minimize angular offsets of the reflected beam. It should also not exceed 150 µrad, corresponding to a 15 µm lateral offset at the entrance of the second LPA stage (inherent angular pointing jitter is ~1.5 µrad jitter Nakamura 2017 ). Furthermore, the surface roughness of available tape materials can be a considerable drawback. Even after optimization, the root-mean-square (RMS) wavefront error of the tape was

Read the complete text