Modeling Scintillation Photon Transport and Reconstruction Algorithms for the Time-of-Flight Detector in the T2K Neutrino Experiment
E. Villa · 2025
Read Modeling Scintillation Photon Transport and Reconstruction Algorithms for the Time-of-Flight Detector in the T2K Neutrino Experiment by E. Villa (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-17860.txt.
Introduction
C Alt leads a large T2K team that models a time-of-flight detector for a neutrino study in Japan. Their 2025 letter sets out how the detector should work. It sits in the ND280 suite, which checks neutrinos close to their source.
Six units form a cube, each with long plastic bars that flash when a particle passes. Light sensors at both bar ends catch the flash and time it. Sharp timing helps sort particles and reject stray noise. The letter details how flashes travel in the bars and how signals are rebuilt from the raw hits.
Catalog record
| CREATOR | E. Villa |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 44 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-17860
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Modeling Scintillation Photon Transport and Reconstruction Algorithms for the Time-of-Flight Detector in the T2K Neutrino Experiment E. Villa Abstract The T2K ND280 upgrade aims to reduce the systematic uncertainty of the CP-violating phase, δ C P \delta_{CP} , to reject non-CP violation hypothesis at 3 σ 3\sigma confidence level. A crucial component of the ND280 upgrade, alongside the Super Fine Grained Detector (SuperFGD) and two High-Angle Time Projection Chambers (TPCs), is the Time-of-Flight (ToF) detector, which significantly enhances background rejection and particle identification capabilities. The ToF detector features six modules in a cube configuration, each with 20 plastic scintillator bars measuring 220 × 12 × 1 cm 3 \text{220}\times\text{12}\times\text{1}\,\text{cm}^{3} and is equipped with Silicon Photomultiplier (SiPM) arrays at both ends to capture scintillation light. This letter outlines the modelling of the detector response and the signal reconstruction process. 1 Introduction In recent years, the precision demands of neutrino oscillation experiments have stretched the capabilities of existing near detectors. These detectors are crucial for calibrating beam neutrino predictions and reducing uncertainties in neutrino-nucleus cross-sections. To address limitations in angular coverage and granularity for low-momentum particles, T2K initiated an upgrade in 2016. This upgrade also aimed to enhance particle direction determination to minimise background noise from outside the detector’s active fiducial volume. The improvements are designed to optimize systematic uncertainties, handle increasing data volumes, and enhance the precision of \delta_{CP} measurements, enabling rejection of the non-CP-violation hypothesis at approximately the 3\sigma confidence level [ 1 , 2 ] . A significant part of this upgrade involved replacing the P0D detector with a system featuring the Super Fine Grained Detector (SuperFGD) [ 4 ] , positioned between two High Angle Time Projection Chambers (HA-TPCs) [ 3 ] enclosed by six Time-of-Flight (TOF) detectors. The SuperFGD acts as a neutrino target, while the TOF detectors measure particle arrival times to distinguish between external particles and those from neutrino interactions, thereby reducing background signals. This paper details the reconstruction algorithm and the modelling of photon transport and electronics response, focusing on a simple yet physically descriptive model. This approach allows for the use of tabulated values and an understanding of each simulation element’s impact. The development of both algorithms was carried on and tested using data from the single bar setup [ 9 ] , a test bench consisting of a single detector unit. In this paper, we first introduce the study (Section 1) and present the ToF detector (Section 2). We then describe the methods for waveform analysis (Section 3) and particle position and time reconstruction (Section 4). Section 5 details the detector modelling, including photon processes and electronics, while Section 6 compares the model with experimental data. Finally, Section 7 summarizes the main conclusions. 2 ToF detector description The ToF system [ 9 ] is made up of six similar modules arranged in a cube, see Fig. 1 . Each module contains 20 plastic scintillator bars, covering an active area of 5.4 m². Due to space constraints and the need for a sturdy build, the bars are placed in a plane with a 1.5 mm gap between them, allowing for steel brackets to attach the bars to an aluminium frame. Two bars from the bottom module are removed to make room for cable trays. Figure 1 : 3D view of the ToF system, composed of six modules arranged in a cube. Each module houses 20 plastic scintillator bars, covering an active area of 5.4 m². The bars are mounted in a plane with 1.5 mm gaps to accommodate steel brackets on the aluminium frame. In the bottom module, two bars are removed to provide space for cable trays. Each bar measures \text{220}\times\text{12}\times\text{1}\text{cm}^{3} and is made of EJ-200 plastic scintillator, which has a fast rise ( 0.9 ns) and decay time ( 2.1 ns) and a peak emission wavelength ( 420 nm) that matches the spectral sensitivity of the SiPMs. The bars are wrapped in aluminium foil and black plastic film to ensure opacity. The aluminium maximises specular reflection along the bar, enhancing light collection efficiency and reducing photon arrival time dispersion, a feature used in the simulation. Each scintillator bar is read out at both ends by an array of 8 Hamamatsu S13360-6050PE SiPMs (6 × 6 mm² each), with the signals from each array summed into a single readout channel, yielding 2 channels per bar and a total of 236 channels across the detector (two bars from the bottom layers are removed to allow cabling access). The SiPM arrays cover approximately 24% of the active area at each end of the bar, which is important when considering reflections: photons missing the photosensors can reflect off the bar ends and contribute to the detected signal. These SiPM arrays are housed in plastic end-caps to ensure mechanical stability and light-tightness, see Fig. 2 . Figure 2 : Layout of SiPM sensors and 3D printed protective capsule at the readout end of the bar. 2.1 Single bar setup The performance of the system was evaluated using a single ToF bar, see sketch in Fig. 3 . The experimental setup mirrored the final detector geometry and readout configuration including the final SAMPIC digitiser [ 5 ] that is used in the T2K 4 \pi Time of Flight detector [ 9 ] 1 1 1 In our earlier work [ 9 ] , the same detector and front-end electronics was used with different waveform digitiser. . In the single bar setup, two identical counters were positioned at the top and bottom of the bar to create a trigger system. Both counters were constructed from fast scintillator material (EJ-228) and were connected to two 1 -inch R4998 Hamamatsu photomultiplier tubes (PMTs) via light guides. The trigger time was determined by averaging the times recorded by the four PMTs. Signals from both the PMTs and the SiPM arrays of the test bar were directed to a SAMPIC readout board for data acquisition. This electronic readout provided comprehensive waveform data over a 19.75 ns time interval with 62 samples of 0.3125 ns each 2 2 2 The SAMPIC readout provides 64 samples, although the final two are not sufficiently stable. . Measurements were conducted at 14 distinct positions along the bar, achieved by repositioning the time reference hodoscopes. Figure 3 : Sketch of the single-bar testbench. The trajectories of photons reaching the sensor directly (blue) and after reflections (orange) are shown, together with the two SiPM readout ends (Left and Right) and the two reference PMT hodoscopes. The expected waveforms from both readout ends are also illustrated. 3 Detector modelling For its usage in the T2K’s N280 detector, we have developed a detector model capable of describing the photon transport and electronics performance in detail using a simple algorithm based on fundamental physical inputs. The simulation accounts for photon propagation, photon detection, and the electronics response. In this section, we describe the components of the detector modelling, the model steering parameters are presented in Table 1 . Parameter Value Parameter Value Geometry and optics parameters Bar Length (cm) 220. Scintillator Index Refraction 1.58 Silicium Index of Refraction [ 10 ] 5.13 Silicium cover Index of Refraction [ 8 ] 1.55 Reflectivity SiPM house material 0.3 g_{\text{Mie}} 0.9