Quantum Noise Reduction in the Space-based Gravitational Wave Antenna DECIGO Using Optical Springs and Homodyne Detection scheme

Kenji Tsuji, Tomohiro Ishikawa, Kentaro Komori, Yutaro Enomoto, Yuta Michimura, Kurumi Umemura, Shoki Iwaguchi, Keiko Kokeyama, Seiji Kawamura · 2025

Read Quantum Noise Reduction in the Space-based Gravitational Wave Antenna DECIGO Using Optical Springs and Homodyne Detection scheme by Kenji Tsuji, Tomohiro Ishikawa, Kentaro Komori, Yutaro Enomoto, Yuta Michimura, Kurumi Umemura, Shoki Iwaguchi, Keiko Kokeyama, Seiji Kawamura (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-17372.txt.

Introduction

Kenji Tsuji and eight co-authors work on quieting a planned space detector for gravitational waves. Their 2025 arXiv paper concerns DECIGO, a space antenna meant to catch primordial waves from cosmic inflation. The detector listens in a low band, from a tenth of a hertz to ten hertz, where quantum noise is a key limit.

The team adds optical springs and a homodyne readout scheme to cut that noise. A past concern was that bending the long arm cavities would spoil the quantum state through diffraction losses. They build a stricter model that counts how vacuum states mix under those losses. With the best settings, high sensitivity survives even with the losses in place. Other technical noises still block the final goal, though. The paper marks clear progress rather than a finished route to primordial waves.

Catalog record

CREATORKenji Tsuji, Tomohiro Ishikawa, Kentaro Komori, Yutaro Enomoto, Yuta Michimura, Kurumi Umemura, Shoki Iwaguchi, Keiko Kokeyama, Seiji Kawamura
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE36 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-17372

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quantum Noise Reduction in the Space-based Gravitational Wave Antenna DECIGO Using Optical Springs and Homodyne Detection scheme Kenji Tsuji, Tomohiro Ishikawa, Kentaro Komori, Yutaro Enomoto, Yuta Michimura, Kurumi Umemura, Shoki Iwaguchi, Keiko Kokeyama, Seiji Kawamura Abstract The DECi-hertz Interferometer Gravitational-wave Observatory (DECIGO) is a planned space-based, next-generation gravitational wave detector aimed at observing primordial gravitational waves originating form cosmic inflation. This work focuses on reducing the quantum noise, in the instrument’s observation band of 0.1 0.1 to 10 10 Hz, by employing optical springs and a homodyne detection scheme. Although detuning 1000 km long arm cavities was previously considered ineffective due to quantum state degradation from diffraction losses, we revisit this problem by formulating a new, rigorous model for quantum state of light by accounting for the vacuum state mixing as a result of diffraction losses. This work shows that high sensitivities can be achieved by employing optimal configurations of optical springs and homodyne detection schemes even with diffraction losses. These improvements alone are still not sufficient to achieve sensitivities to detect primordial gravitational waves as other technical noises limit further improvement. I Introduction Current long-baseline, terrestrial gravitational wave detectors of the LIGO-Virgo-KAGRA collaboration have detected multiple compact binary mergers around 100 Hz. The first detection in 2015 Abbott et al. 2016 , and the detections from subsequent observation runs Collaboration et al. 2023 ; Collaboration et al. 2022 have revolutionized astrophysics and helped improve population models and multi-messenger astronomy. Sensitivity towards gravitational waves in these frequencies is expected to improve by an order of magnitude with the planned next-generation detectors, such as the Einstein Telescope Punturo et al. 2010 and the Cosmic Explorer Abbott et al. 2017 . Even with the next-generation of detectors, the sensitivity at low frequencies around 1 Hz is not expected to improve, and it is fundamentally limited by terrestrial seismic noise and test-mass suspension thermal noise. DECIGO is a Japanese space-based gravitational wave antenna that is proposed to have optimal sensitivity for the frequency band 0.1 to 10 Hz. Current design of DECIGO employs three drag-free spacecrafts that form optical cavities with a base-line of about 1000 km Seto et al. 2001 ; Kawamura et al. 2021 ; Tsuji et al. 2024 . A space-based gravitational wave observatory is free from the seismic noise, that is unavoidable by terrestrial interferometers and this advantage also extends to not needing to employ suspensions for vibration isolation of the test-masses, eliminating the suspension thermal noise contribution to the instrument noise. The main science goal of DESIGO is to detect primordial gravitational waves as a result of cosmic inflation Maggiore 2000 ; Allen 1988 ; Sahni 1990 , as their direct detection will yield key insights into early universe that is only possible to probe via gravitational waves. The recent, Planck cosmic microwave background measurements and others have set a new upper limit for allowed gravitational wave energy density, {\Omega}_{\mathrm{GW}} , by lowering it from 2{\times}10^{-15} to 1{\times}10^{-16} Akrami Cheghasiahi et al. 2020 . As such, DESIGO’s original design sensitivity is no longer sufficient to detect primordial gravitational waves, further emphasizing the need for considering new instrument design choices that can achieve better sensitivities. The primary limiting noise source in DESIGO’s observation band is quantum noise. Thus, a significant focus is placed on improving the instrument’s quantum noise performance. In general, for cavities with very long baselines such as DECIGO, it has been assumed that diffraction losses prevent the preservation of correlated quantum states of light, reducing the effectiveness of techniques such as optical spring (via cavity detuning) and homodyne detection, which are commonly used in ground-based detectors. To address this issue, quantum locking schemes with short additional cavities have been proposed and analyzed Yamada et al. 2020 ; Yamada et al. 2021 ; Tsuji et al. 2023 . These studies demonstrate a significant improvement in quantum noise limited sensitivities by employing detuned, lossless sub-cavities along with the use of homodyne detection schemes. A recent study has developed a framework to precisely modeling the impact of diffraction losses on the quantum states of light Umemura et al. 2025 . This allowed us to evaluate the advantages of using quantum techniques, like optical springs, directly on the main long-baseline cavities of DESIGO. We calculate the sensitivity of the instrument in the observation band with detuning applied and with a homodyne detection scheme. In section II , we establish the treatment of quantum fluctuations used in this paper, following that influence of diffraction losses in a Fabry-Perot cavity, optical springs and homodyne detection schemes are also discussed. Section III presents the simulation method used, and search for optimal parameters for potential DECIGO design. This section also explains the constraints set by acceleration noise, which is considered a practical noise source, in search for optimal instrument design parameters. Following that, section IV presents the optimized sensitivity for primordial gravitational waves using signal-to-noise ratio (SNR) as a metric. Finally, section V concludes, with a future direction for this work. Figure 1 : Optical design of homodyne detection scheme considering diffraction losses. BS1 is a beam splitter used to extract the Local Oscillator (LO) beam, with its parameters defined by the amplitude reflectivity r_{1} and amplitude transmissivity t_{1} . The phase of the LO beam can be arbitrarily adjusted using a phase shifter. BS2 is a beam splitter with reflectivity r_{2} and transmissivity t_{2} , used to interfere the light reflected from the arm cavity with the LO beam. Since the arm cavity is assumed to be long, as in DECIGO, diffraction losses become significant. The laser beam inside the cavity is configured to have its waist at the cavity’s center, and the curvatures of the Input Test Mass (ITM) and End Test Mass (ETM) are assumed to be perfectly mode-matched to the wavefront of the Gaussian beam. The reflectivities and transmissivities of these two test masses are denoted as r_{\mathrm{\scalebox{0.5}{ITM}}},t_{\mathrm{\scalebox{0.5}{ITM}}},r_{\mathrm{\scalebox{0.5}{ETM}}},t_{\mathrm{\scalebox{0.5}{ETM}}} , respectively. II Quantum Noise in a Fabry–Perot Cavity with Diffraction Losses In this section, we introduce a treatment of quantum fluctuations of light and describe how they manifest as quantum sensing noise that limit the sensitivity of DESIGO. The optical setup for which the quantum noise limited sensitivity is calculated is shown in the Fig 1 . An input laser beam is split by a beam splitter (BS1), where, one part of light is coupled into a long Fabry-Perot cavity and the other part is used as a local oscillator (LO) for the homodyne detection scheme. The homodyne detection is implemented by interfering the reflection from the long cavity and the LO beam using another beam splitter (BS2). The light from the two output ports of BS2 are captured using two photodetectors (PD). The quantum noise coupling paths for this optical configuration are described in Fig 2 . Each input port corresponds to a point in the optical configuration where quantum fluctuations enter the system. These fluctuations propagate the graph, where blocks represent various optical components. The cumulative transfer function from each input port to the output port (the PDs) can be calculated by multiplying all the transfer functions of the optical components (blocks) in the traversed path. Figure 2 : Block diagram for calculating the quantum noise of the detector,

Read the complete text