Multiple droplets dynamics on cylindrical fiber Preprint: DRAFT v1.0 - August 10, 2026
J. Van Hulle, N. Vandewalle, Z. Pan · 2025
Read Multiple droplets dynamics on cylindrical fiber Preprint: DRAFT v1.0 - August 10, 2026 by J. Van Hulle, N. Vandewalle, Z. Pan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-15944.txt.
Introduction
J. Van Hulle, N. Vandewalle, and Z. Pan study droplets sliding down a vertical fiber. A single drop does more than fall: it lays a film of liquid behind it. The film thins along the fiber, and its thick part near the start breaks up into a new droplet. That break up is a known surface tension effect.
The new drop first speeds up, gathering fluid from the film ahead of it. Then loss at its rear wins, and it slows. At last it merges with the first drop, which can then travel further on the refilled supply. Later generations of drops can arise the same way. The team model each phase of the cycle. The cascade is set by how the film thins over time.
Catalog record
| CREATOR | J. Van Hulle, N. Vandewalle, Z. Pan |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-15944
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Multiple droplets dynamics on cylindrical fiber Preprint: DRAFT v1.0 - August 10, 2026 J. Van Hulle, N. Vandewalle, Z. Pan Abstract We investigate the descent of a single droplet on a vertical fiber and its role in generating additional droplets. As the droplet slides, it deposits a non-uniform liquid film whose thickness decreases along the fiber. The thicker portion near the release point undergoes a Rayleigh-Plateau instability, leading to the formation of a new droplet. This newly formed droplet initially accelerates by accumulating fluid from the film ahead, then shifts to a decelerating phase once fluid loss at its rear dominates. Ultimately, it merges with the original droplet. This refeeding allows the droplet to travel further. Successive generations of droplets can similarly arise, governed by the evolving film thickness. We develop theoretical models that capture each phase of motion and discuss the experimental and theoretical aspects of this cascading cycle of droplet generation. I Introduction Liquid films are a broad research area encompassing both natural systems and technological processes. They span length scales from micron-thick tear film on the cornea to meter-thick films in lava flows Wong et al. 1996 ; Griffiths 2000 . Such films show diverse behaviors. For example, window panels or gutters under heavy rainfall display quasiperiodic wave patterns, paint applied on walls may exhibit fingering, and liquid coatings on fibers may destabilize into droplet configurations. Classical coating theory, developed by Landau, Levich, and Derjaguin, describes how a thin film is entrained on a flat plate withdrawn from a liquid bath. The resulting film thickness depends on a balance between viscous drag and capillary suction and scales with the withdrawal speed Landau and Levich 1988 . When the coated flat substrate is tilted, the film flows under gravity, which leads to diverse phenomena. The dynamics is mainly a results of the competition between viscous, inertial, and interfacial effects. When inertia is negligible, perturbation at the contact line can grow, forming triangular sawtooth patterns or straight-edged finger-like rivulets Huppert 1982 ; Hocking et al. 1999 ; Johnson et al. 1999 . However, when inertial effects become significant, disturbances from the noise at the inlet lead to wave patterns, either short-wavelength sinusoidal shapes or pulse-like solitary waves Park and Nosoko 2003 ; Nosoko and Miyara 2004 ; Scheid et al. 2006 . Increasing the flow rate promotes chaotic wave behavior. Replacing the flat plate with a cylindrical fibre removes one transverse dimension and introduces a curvature at the interface. Coating theory is similar to the case of the flat substrate, but the film thickness additionally depends on the fiber diameter Quéré 1999 . Film flow dynamics on vertical fibers results in various patterns, including wave formation, pulses, and droplet formation through Rayleigh-Plateau instability Kalliadasis and Chang 1994 ; Craster and Matar 2006 ; Gabbard and Bostwick 2021 . Observed behaviors depend on fiber sizes, flow rate, and nozzle diameter Smolka et al. 2008 ; Kliakhandler et al. 2001 ; Sadeghpour et al. 2017 ; Gabbard and Bostwick 2021 ; Guo and Liu 2022 . When increasing the flow rate or fiber diameter, the system transitions from evenly spaced droplets cyclically coalescing with smaller beads to a steady Rayleigh-Plateau regime with periodic bead trains, and finally to an unsteady regime with random coalescence and irregular patterns. When inertia dominates surface tension effects, capillary wave trains form along the liquid film Duprat et al. 2009 . Quéré further provided a cutoff film thickness below which vertical coatings remain cylindrically stable Quéré 1990 . Beyond film flows, interactions between individual droplets with flat or curved substrates have also been widely studied. Droplets spread on flat substrates or adopt spherical shapes depending on surface wettability and substructures Bonn et al. 2009 ; Quéré 2002 . Conversely, on fibers, droplets depict two distinct configurations based on fiber size and liquid properties Carroll 1976 ; McHale and Newton 2002 . Small droplets adopt asymmetrical clamshell configurations, while larger droplets adopt symmetric barrel geometry around the fiber. Furthermore, the dynamics of droplet sliding under gravity on both flat and curved substrates have been extensively described for various geometrical cases Weyer et al. 2017 ; Khattak et al. 2024 ; Leonard et al. 2023 ; Kern and Carlson 2024 ; Van Hulle et al. 2024 and wetting conditions Furmidge 1962 ; Mahadevan and Pomeau 1999 ; Gilet et al. 2010 . Yet, some mysteries are still to be unraveled. In particular, Quéré et al. highlighted in Quéré et al. 1990 predator/prey-like interactions between droplets on a vertical fiber resulting from the Rayleigh-Plateau instability: “When […] the film is thick […], drops appear quickly and fall along the fiber. If one drop is slightly larger than the other, it falls faster and in passing swallows the rest”. To the knowledge of the authors, this phenomenon remains understudied despite its common occurrence in fiber- and droplet-based experiments. This study investigates the dynamics of a single droplet descending along a vertical dry fiber, including phenomena induced by its passage. As the droplet descends, it coats the dry fiber with a thin film of non-uniform thickness while gradually decelerating due to its decreasing weight. The deposited film may rapidly bead up, forming droplets that descend, catch up to their predecessors, and leave behind their own coating films. This iterative cascade of droplets on a fiber sits in between coating processes, film dynamics on fibers, and droplet behaviors. Throughout this study, we use terms such as “mother” and “daughter” droplets, and the “generation” of a droplet family, to describe the recurring pattern of droplet dynamics on a fiber. This choice is partly inspired by an intriguing parallel to Gabriel García Márquez’s novel One Hundred Years of Solitude, in which the Buendía family is doomed to repeat its fate, shaped by inevitable forces beyond their control García Márquez 1995 . Similarly, in our experiments, each generation of the droplets inherits the wetting conditions left by its progenitors and sets the wetting for descendants. The repeated birth, motion, and eventual merging or perishing of droplets create a cycle, governed by perpetual physical laws that mirror the generational patterns described in the novel. Figure 1 : (a) Red dyed silicone oil droplet descending a vertical nylon fiber. The time interval between each image is 0.68 s. As the droplet slides down, a liquid film is left behind. The thickness of this liquid film is larger when the droplet speed is higher. Therefore, at the release point of the initial droplet, the so-called mother or generation 0 droplet, the film is the thickest. The Rayleigh-Plateau instability takes place, which creates a tiny new droplet, termed daughter or generation 1 droplet. This daughter droplet slides on the film left by the mother droplet. (b) Same experiment but down the fiber. The mother droplet is positioned below, while the daughter droplet follows above. The time interval between each image is 0.017 s. One observes that the daughter droplet finally catches the mother droplet, leading to a merging of both droplets. The experimental data for (a) and (b) are the same, \Omega=5~\mu L, \nu=100 cSt, and d=0.3 mm. The scale bars correspond to 2 mm. II Methods We used a pipette (Eppendorf Xplorer) to release a droplet on a