Detecting milli-Hz gravitational waves with optical resonators

Giovanni Barontini, Xavier Calmet, Vera Guarrera, Aaron Smith, Alberto Vecchio · 2025

Read Detecting milli-Hz gravitational waves with optical resonators by Giovanni Barontini, Xavier Calmet, Vera Guarrera, Aaron Smith, Alberto Vecchio (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-15841.txt.

Introduction

G. Barontini leads a team that proposes a gravitational wave detector built from light cavities. Known detectors cover high and low bands, but the milli Hertz range between them is largely unexplored from the ground. Their design uses ultrastable optical resonators, hollow mirrors that hold light at a steady tone. A passing wave would nudge that tone.

They lay out how the device would work in practice. Several classes of sources, from space and from the early universe, may fall inside its reach. The team argue that current technology could already build such a detector on Earth. That claim opens a new band to ground based search. The paper is a design proposal with source estimates.

Catalog record

CREATORGiovanni Barontini, Xavier Calmet, Vera Guarrera, Aaron Smith, Alberto Vecchio
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-15841

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Detecting milli-Hz gravitational waves with optical resonators Giovanni Barontini, Xavier Calmet, Vera Guarrera, Aaron Smith, Alberto Vecchio Abstract We propose a gravitational wave detector based on ultrastable optical cavities enabling the detection of gravitational wave signals in the mostly unexplored 10 − 5 − 1 10^{-5}-1 Hz frequency band. We illustrate the working principle of the detector and discuss that several classes of gravitational wave sources, both of astrophysical and cosmological origin, may be within the detection range of this instrument. Our work suggests that terrestrial gravitational wave detection in the milli-Hz frequency range is potentially within reach with current technology. I introduction The development of instruments capable of detecting gravitational waves (GWs) has been a notoriously lengthy and tortuous journey, since Einstein’s theoretical prediction dating over a century ago Einstein 1916a ; Einstein 1916b . Because astrophysical and cosmological sources of GWs have a rich spectrum covering many decades in frequency – from \sim 10^{-18}\,\mathrm{Hz} to \sim 1\,\mathrm{GHz} – different techniques and technologies have been used or proposed to target specific frequency regimes. At present, three frequency regimes are accessible, each providing information about different classes of sources, and a variety of astrophysical and cosmological processes. At high frequency \sim 10\,\mathrm{Hz}-1\,\mathrm{kHz} , the network of ground-based laser interferometers of the LIGO-Virgo-KAGRA collaboration Aasi et al. 2015 ; Acernese 2015 ; Akutsu et al. 2020 are carrying out regular observing runs at increasing sensitivity level, corresponding currently to a GW characteristic amplitude of \sim 10^{-22} at \sim 100\,\mathrm{Hz} . Since the first detection of GWs produced by the merger of a binary black hole Abbott et al. 2016a , approximately 90 events have been observed Abbott et al. 2016b ; Abbott et al. 2017 ; Abbott et al. 2019 ; Abbott et al. 2021 ; Abbott et al. 2023 . Major new facilities for a next generation observatory, e.g. Einstein Telescope Punturo et al. 2010 and Cosmic Explorer Evans et al. 2021 , are under study. At ultra-low frequencies \sim 1-10\,\mathrm{nHz} , pulsar timing arrays Foster and Backer 1990 ; Detweiler 1979 have been collecting data for over twenty years, reaching a GW strain sensitivity around 10^{-15} . This effort has recently provided some tentative evidence for a GW stochastic background Antoniadis et al. 2023 ; Agazie et al. 2023 ; Reardon et al. 2023 ; Xu et al. 2023 . At extremely-low frequency \sim 10^{-15}-10^{-18}\,\mathrm{Hz} , cosmic microwave background (CMB) polarisation experiments target indirectly the GW stochastic background through the B-mode signature on the polarisation maps Kamionkowski et al. 1997 ; Seljak and Zaldarriaga 1997 . So far, only upper-limits have been placed, see e.g. Kamionkowski and Kovetz 2016 and references therein. The milli-Hz frequency range \sim 10^{-5}-1\,\mathrm{Hz} (“mid-band”, thereafter) is a rich window of astrophysical and cosmological sources, which is essentially unexplored. So far, the only GW searches have been carried out using the Doppler tracking of interplanetary space-probes Estabrook and Wahlquist 1975 ; Anderson et al. 1984 ; Anderson et al. 1993 ; Bertotti et al. 1999 ; Armstrong et al. 2003 , satellite laser ranging measurements Blas and Jenkins 2022 , or by monitoring the normal modes of the Earth Coughlin and Harms 2014 , all resulting in upper-limits. The importance of this frequency range is testified by the many different detection technologies currently under development. These range from space-borne laser interferometers such as LISA Amaro-Seoane et al. 2017 ; Colpi et al. 2024 , Taiji Ruan et al. 2020 and TianQuin Mei et al. 2021 , to terrestrial Abend et al. 2023 and space-borne El-Neaj et al. 2020 atom interferometers, and optical atomic clocks on satellites Kolkowitz et al. 2016 . All these observatories will have sensitivity in the frequency window \sim 10^{-4}-1\,\mathrm{Hz} , targeting several sources: galactic and local group stellar-mass compact binaries of (primarily) white dwarfs, neutron stars and stellar-mass black holes Toonen et al. 2018 ; Korol et al. 2019 , including guaranteed sources already known by other means Kupfer et al. 2024 ; Wagg et al. 2022 ; Finch et al. 2023 , the coalescence of massive black hole binaries, see e.g. Volonteri et al. 2021 and references therein, the in-spiral of stellar-mass compact objects onto a massive black hole Barack and Cutler 2004 , and possibly backgrounds from the early universe Maggiore 2000 . The novel detector concept that we introduce here leverages significant advances in the technology of optical resonators, driven by the development of optical atomic clocks Ludlow et al. 2015 ; Abdel-Hafiz et al. 2019 . In this work, we first demonstrate the working principle of a GW detector based on monolithic optical cavities. The essential point of our approach is that gravitational waves in the mid-band do not deform the rigid spacer of the cavity, whose eigenmodes lie at kHz frequencies, but instead alter the phase of the light as it propagates between the mirrors. The cavity length defined by the spacer therefore remains constant, while the optical path through space varies with the passing wave. We show that state-of-the-art optical cavities have sufficient sensitivity to be readily employed to search for GWs in the mid-band. We discuss the science reach enabled by networking two or more such detectors. The discovery space includes potential detection of galactic stellar-mass compact binaries and double degenerate type IA supernovae, massive black hole mergers up to cosmological distances and the probing of the stochastic GW background down to the 10^{-6} limit. Future programs such as the LISA and Taiji space-borne missions will feature orders of magnitude better sensitivity in this frequency range, but their science operation is more than a decade away, leaving ample room for discoveries in an essentially pristine parameter space, using the detectors proposed here. II Principle of Operation GWs can be detected by measuring the phase difference \Delta\varphi(t) between laser beams travelling along two paths that are affected differently by the passing of a GW Thorne and Blandford 2017 . The associated phase variation is \Delta\varphi(t)=kh(t)\Delta\mathcal{L}/2 , where h(t) is the GW strain amplitude, \Delta\mathcal{L} is the distance along the two paths that is affected differently by the GW, and k is the magnitude of the wavevector of the light. Laser interferometers currently in operation detect GWs by looking at the relative change of phase \Delta\varphi(t) between the light travelling along their two perpendicular arms. As we explain below, the detector proposed here measures \Delta\varphi(t) in two different ways. One is between the light propagating along two perpendicular ultrastable cavities, the other is between the light travelling inside an ultrastable cavity and an atomic reference. Recent progress in optical clock technology enable us to measure with high precision the phase and frequency of laser light Ludlow et al. 2015 ; Abdel-Hafiz et al. 2019 . Clock transitions are nowadays interrogated with lasers that have linewidths approaching the ones of the transitions themselves ( \simeq\mathrm{mHz} ). To achieve such narrow linewidths the lasers are frequency- and phase- stabilized to the resonance of a monolithic optical cavity, so that the fractional cavity length stability is transferred to the fractional frequency stability of the laser as \Delta l/l=\Delta f/f , which is related to phase variations by 2\pi\Delta f(t)=d[{\Delta\varphi(t)}]/dt . With this arrangement ultrastable lasers can achieve a fractional

Read the complete text