Pinch-off dynamics for a Newtonian liquid thread draining in a viscoplastic medium

Shu Yang 1,2 , Konstantinos Zinelis 3 , Sourojeet Chakraborty 4 , and C. Ricardo Constante-Amores 1 · 2025

Read Pinch-off dynamics for a Newtonian liquid thread draining in a viscoplastic medium by Shu Yang 1,2 , Konstantinos Zinelis 3 , Sourojeet Chakraborty 4 , and C. Ricardo Constante-Amores 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-15046.txt.

Introduction

Shu Yang, Konstantinos Zinelis, Sourojeet Chakraborty, and C. Ricardo Constante-Amores simulate a liquid thread breaking inside a yield-stress material in a 2025 fluid dynamics paper. A Newtonian thread drains and pinches off while surrounded by a viscoplastic medium, a material that flows only where stress passes a threshold. Such setups appear in embedded printing, where ink threads rest inside support gels.

Simulations and theory agree that breakup happens below a nearly universal threshold set by the balance of capillary force and yield stress. The viscosity contrast matters little at low Ohnesorge numbers, which compare viscous and capillary effects. Maps over the parameter plane reveal distinct regime boundaries, and a scaling law predicts the minimum thread radius accurately. Stress localization inside the viscoplastic surroundings emerges as the key mechanism.

Catalog record

CREATORShu Yang 1,2 , Konstantinos Zinelis 3 , Sourojeet Chakraborty 4 , and C. Ricardo Constante-Amores 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-15046

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Pinch-off dynamics for a Newtonian liquid thread draining in a viscoplastic medium Preprint: APS/123-QED Shu Yang 1,2 , Konstantinos Zinelis 3 , Sourojeet Chakraborty 4 , and C. Ricardo Constante-Amores 1 Abstract The pinch-off dynamics of a Newtonian liquid thread embedded in a viscoplastic medium is investigated using direct numerical simulations and theory. Thread breakup occurs below a nearly universal threshold set by the balance of capillary and yield stresses, largely independent of the viscosity ratio at low Ohnesorge numbers. Regime maps in the Ohnesorge–plastocapillary number plane reveal distinct boundaries, and scaling analysis captures the minimum thread radius in excellent agreement with simulations. These results provide a predictive framework for thread dynamics in complex fluids and highlight the role of stress localization in viscoplastic environments. The obtained insights are relevant for embedded additive manufacturing and other technologies involving fluid threads in complex media. Introduction – The thinning and pinch-off of liquid threads is a canonical problem in free-surface flows ( Eggers and Villermaux 2008 ) , with applications spanning inkjet printing ( Derby 2010 ; Rump et al. 2024 ) , electrohydrodynamic spraying ( Lopez-Herrera et al. 1999 ) , and fiber or additive manufacturing ( Sun et al. 2022 ; Bankapalli et al. 2023 ) . In Newtonian fluids, capillary, viscous, and inertial forces govern the growth of perturbations along a cylindrical thread, giving rise to the classical Plateau–Rayleigh instability and nonlinear pinch-off when perturbations exceed a critical wavelength ( Rayleigh 1892 ; Basaran et al. 2013 ; Castrejón-Pita et al. 2012 ; Stone 1994 ) . Three scaling law regimes have been established to describe thread pinch-off dynamics. Eggers 1993 first established inertial-viscous scaling laws for thread dynamics, demonstrating that the flows display self-similar behavior characterized by scaling exponents for both neck shape and velocity field. Papageorgiou 1995 subsequently developed viscous scaling laws where capillary and viscous forces dominate, later extended by Lister and Stone 1998 to include external phase viscosity effects. Finally, the inertial regime addresses inviscid thread breakup governed by inertial and capillary forces ( Day et al. 1998 ; Wee et al. 2022 ) . Later studies on this paradigm also studied the effect of surfactants ( Craster et al. 2002 ; Xu et al. 2007 ; Kamat et al. 2018 ) and incorporated viscoelasticity within the thread ( Eggers 2014 ; Turkoz et al. 2018 ) . By contrast, the influence of a viscoplastic surrounding medium, a non-Newtonian material exhibiting yield-stress behavior, remains largely unexplored. This is because yield stress fluids behave like elastic solids under stresses below a critical yield stress, and flow like non-Newtonian fluids (e.g., shear-thinning or shear-thickening) when this stress is exceeded ( Balmforth and Hewitt 2025 ; Hossain et al. 2025 ; Sanjay et al. 2021 ) . This dual behavior raises fundamental questions about how capillary, viscous, and yield stresses interact to determine thread rupture. Motivated by recent the work of Hossain et al. 2025 , we investigate the pinch-off dynamics of a Newtonian thread draining in a viscoplastic medium. Our results reveal a universal rupture threshold, primarily set by the balance of capillary and yield stresses and largely independent of viscosity ratio at low Ohnesorge numbers ( \mathcal{O}h , comparing the inertial–capillary to inertial–viscous timescales). We present regime maps in terms of \mathcal{O}h and the plastocapillary number \mathcal{J} (which accounts for the competition between the capillary and yield stresses), and identify scaling laws for the minimum thread radius and maximum axial velocity over time. These results establish general principles for thread dynamics in complex media. This letter is organized as follows: we briefly describe the numerical method, then present a regime map illustrating the influence of viscoplasticity on the dynamics, along with new scaling laws for the maximum axial velocity and minimum thread radius over time. Figure 1: Regime maps in the \mathcal{J} – \mathcal{O}h plane for m=(0.1,1,10) , shown in panels (a)-(c). Blue circles denote breakup, where the thread thins to pinch–off; red squares denote stable threads that persist without rupture. Triangles mark transitional cases at the determined boundary. Each dot corresponds to a simulation; solid lines are guides to the eye indicating the breakup boundary. Figure 2: Temporal evolution h_{\min} over time up to t=160 for \mathcal{O}h=(10^{-3},10^{-1},10^{0}) corresponding to panels (a)-(c), respectively. We solve the axisymmetric, two-phase, incompressible Navier–Stokes equations using the open-source Basilisk library Popinet 2009 ; Popinet et al. 2025 . Distances, time, and pressures are nondimensionalized by R_{0} , t_{i}=\sqrt{\rho_{b}R_{0}^{3}/\sigma} , and \sigma/R_{0} , respectively, where \sigma and \rho_{b} represent the surface tension and thread density, and R_{0} is the radius of the undeformed thread. Here t_{i} represents the inertial-capillary time scale. The external phase is modeled as a Herschel–Bulkley fluid, with deviatoric stress \begin{split}\bm{\tau_{s}}&=2\mu_{\mathrm{eff}}(\|\bm{\mathcal{D}}\|)\,\bm{\mathcal{D}},\\ \mu_{\mathrm{eff}}&=\frac{\tau_{y}}{2\|\bm{\mathcal{D}}\|+\varepsilon}+k_{l}\,(2\|\bm{\mathcal{D}}\|+\varepsilon)^{n-1},\end{split} (1) where \|\bm{\mathcal{D}}\| is the second invariant of the deformation rate tensor, \tau_{y} is the yield stress, k_{l} the consistency index, and n the power-law index controlling shear-thinning ( n<1 ) or shear-thickening ( n>1 ) behavior. The dimensionless groups controlling the dynamics are: the plastocapillary number \mathcal{J}=\tau_{y}R_{0}/\sigma , the Ohnesorge number \mathcal{O}h=\mu_{b}/\sqrt{\rho_{b}\sigma R_{0}} , the power-law index n determining the shear-rate dependence of the apparent viscosity, the normalized viscosity ratio m=k_{l}\dot{\gamma}_{c}^{n-1}/\mu_{b} , and the density ratio \rho_{r}=\rho_{l}/\rho_{b} , where \dot{\gamma}_{c} denotes the characteristic shear rate. The small parameter \varepsilon\ll 1 regularizes the singularity at \|\bm{\mathcal{D}}\|=0 . Full numerical details and convergence tests are provided in the Supplemental information. The initial condition consists of a slender liquid thread of radius R_{0} surrounded by viscoplastic fluid in the absence of gravity, slightly perturbed to trigger capillary thinning. Full details of the initial profile, domain size, and boundary conditions are given in the Supplemental information. Results – Figure 1 shows a regime map in the (\mathcal{O}h,\mathcal{J}) space for different viscosity ratios, m=0.1,1,10 , with n=1 and \rho_{r}=1 . The maps reveal the competing roles of capillarity, yield stress, and viscosity in thread thinning. At low \mathcal{J} , capillary forces dominate, and the thread thins continuously until breakup. Increasing \mathcal{J} stabilizes the thread as the yield stress suppresses extensional flow. The critical yield number, \mathcal{J}_{c}\approx 8\times 10^{-3} , at which rupture occurs, is largely independent of the viscosity ratio and of \mathcal{O}h<10^{-1} , indicating that breakup is set primarily by the balance between capillary and yield stresses. For large Ohnesorge numbers ( \mathcal{O}h\gg 1 for m=1 and Oh\gg 5\times 10^{-1} for m=10 ), viscous forces dominate and, together with yield stress, suppress capillary-driven rupture. The regularization parameter \varepsilon smooths the yield transition in the viscoplastic model; as \varepsilon\to 0 , \mathcal{J}_{c} converges to the ideal sharp yield stress criterion, establishing the physical limit and universality of this rupture threshold. While the regime map in figure 1 characterizes the final state of the thread, to elucidate the influence of m and \mathcal{J} on the filament thinning dynamics, we examine the temporal evolution of the minimum thread radius h_{\min}(t) across three Ohnesorge numbers: \mathcal{O}h=(10^{-3},10^{-1},10^{0} ). For \mathcal{O}h=10^{-3} , corresponding to the inertia-dominated regime in (nearly) inviscid threads, all cases with \mathcal{J}<\mathcal{J}_{c} collapse onto a single curve independent of m , as viscous effects are negligible and the dynamics are governed by the inertial-capillary balance (refer to figure 2 a). When \mathcal{J}>\mathcal{J}_{c} , the yield stress becomes comparable to the capillary stress

Read the complete text