Simultaneous Matching of Phase and Amplitude for Spontaneous Parametric Down-conversion in Semiconductor Waveguides

Albert Peralta Amores & Marcin Swillo · 2025

Read Simultaneous Matching of Phase and Amplitude for Spontaneous Parametric Down-conversion in Semiconductor Waveguides by Albert Peralta Amores & Marcin Swillo (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-14903.txt.

Introduction

Albert Peralta Amores and Marcin Swillo propose a way to make photon pairs far more efficiently in semiconductor waveguides, in a 2025 optics paper. The process is spontaneous parametric down-conversion, where one photon splits into two inside a nonlinear material. Two conditions must hold at once: phase matching along the guide and amplitude matching across it.

Their idea is to modulate one nonlinear coefficient unevenly across the waveguide cross-section. That shaping achieves amplitude matching across the width while keeping phase matching along the length. Analysis predicts about ten times the efficiency of the best unmodulated waveguide, and vastly larger gains over designs with phase matching alone. The authors also sketch a compact twin-photon source tunable across the telecom band for future quantum communication hardware.

Catalog record

CREATORAlbert Peralta Amores & Marcin Swillo
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE12 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-14903

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Simultaneous Matching of Phase and Amplitude for Spontaneous Parametric Down-conversion in Semiconductor Waveguides Albert Peralta Amores & Marcin Swillo Abstract We propose a non-uniform modulation of χ x ​ y ​ z ( 2 ) \chi^{(2)}_{xyz} to significantly enhance photon pair generation efficiency via spontaneous parametric down-conversion in modal phase-matched semiconductor waveguides. This approach enables amplitude-matching in the transverse direction while preserving the phase-matching along the waveguide propagation axis. Our analysis predicts a tenfold efficiency increase in comparison to the most efficient non-modulated waveguide, and up to 13 orders of magnitude efficiency enhancements relative to solely phase-matched waveguides. Furthermore, we explore the implementation of a highly efficient compact twin-photon source, tunable across the communication band, using an amplitude- and phase-matched structure. Since the verification of Bell’s tests using spontaneous-parametric down-conversion (SPDC) photon pair sources in 1988 Shih and Alley 1988 ; Ou and Mandel 1988 , SPDC has emerged as a cornerstone in the generation of entangled photon pairs and squeezed states of light Caves 1981 ; Clauser 1978 . Its pivotal role extends across multiple quantum communication schemes, including quantum key distribution (QKD) Ekert 1991 , teleportation Marcikic et al. 2003 and quantum repeaters Briegel et al. 1998 , all of which rely fundamentally on entanglement. Squeezed light finds applications in high precision sensing Collaboration 2011 , QKD Gehring et al. 2015 and photonic quantum computation Takeda and Furusawa 2019 . Several solutions for phase-matching (PM) the SPDC process, making it efficient, have been proposed. The compensation of the chromatic dispersion by exploiting the birefringent properties of a nonlinear crystal, known as birefringence PM, was firstly demonstrated for SPDC in 1995 Kwiat et al. 1995 . The spatial modulation of the non-linear properties of a crystal along the propagation direction by reversing the non-linear interaction after a coherence length to achieve larger conversion efficiency, known as as quasi-PM, was introduced in 1962 Armstrong et al. 1962 . Multiple methods such as temperature fluctuations during or after crystal growth Feng et al. 1980 ; Mizuuchi and Yamamoto 1992 , electric fields Camlibel 1969 or direct wafer bonding of inverted domains Yoo et al. 1995 have been implemented. When the nonlinear media is structured in a waveguide (WG), equiphase velocity propagation between different guided modes, known as modal-PM, can be achieved through dispersion engineering Zhang et al. 1993 . This has led to efficiency enhancements of several orders of magnitude with simultaneous bandwidth narrowing due to the strong spatial confinement of guided modes Fiorentino et al. 2007 while enabling the use of non-birefringent materials. In particular, III-V semiconductors exhibit larger refractive indexes Aspnes and Studna 1983 and \chi^{(2)}_{xyz} susceptibilities Shoji et al. 1997 when compared to other traditionally used materials such as KTP or LiNbO 3 that exhibit birefringence. Here, we propose to significantly enhance the efficiency of SPDC processes by introducing a non-homogeneous spatial modulation of \chi^{(2)}_{xyz} along the transverse plane of a modal-PM WG. As a result, efficiency enhancements up to 10 13 compared to identical non-modulated structures that retain the PM properties have been found. The most efficient PM WG exhibits a tenfold SPDC efficiency enhancement by introducing the modulation, shown in Fig. 1 , resulting in a simultaneously amplitude- and PM structure (APMS). The presented approach enables further efficiency enhancements of PM structures (PMSs), previously considered optimized, making APMSs of considerable interest for the future development of integrated quantum photonic devices. Figure 1: Schematic of the APMS for the generation of counterpropagating photon pairs. Consider a crystalline WG exhibiting \overline{4}3m symmetry with propagation direction along its crystallographic axis ( \hat{z} ), as depicted in Fig.1. When a pump wave with polarization parallel to the crystallographic axis is focused along the WG, the \chi^{(2)}_{xyz} tensor describes the spontaneous splitting of a pump photon into two photons with orthogonal polarization, as defined by the second-order nonlinear-polarization density function: P^{(2)}_{z}(\textbf{r},t)=2d_{25}\varepsilon_{0}E_{y}(\textbf{r},t)E_{x}(\textbf{r},t), (1) where d_{25} is the nonlinear coefficient of the material ( \mathbf{d}=\epsilon_{0}\chi^{(2)}_{xyz} ) and E_{y} , E_{x} are the electric fields of the generated photons, respectively. The SPDC process efficiency would then be governed by the PM condition \mathbf{k}_{p}-\mathbf{k}_{s}-\mathbf{k}_{i}=0 , where the subscripts p, s and i account for the wave vectors of the pump, signal and idler, respectively. The generated signal and idler will excite TE- and TM-like guided modes within the WG, which, together with the lack of phase mismatch in the direction perpendicular to the WG, reduces the PM condition within the WG plane Peralta Amores and Swillo 2022 , yielding: {k}_{p}\cdot sin(\theta_{p})={k}_{TM}+{k}_{TE}, (2) where \theta_{inc} is the pump incidence angle. Pump tilting allows to compensate the momentum mismatch exhibited by the excited modes due to the WG form factor, enabling degenerated counterpropagating photon pairs generation. When assuming a pump coherence time longer than the propagation time of idler and signal photons ( \approx 12.5 ps/mm), the photon-pair generation rate in a WG of length L can be computed as: \frac{\langle N\rangle}{t}=I_{p}\frac{8\pi^{2}Lv_{TE,s}n_{TM,i}}{c_{0}\lambda_{s}\lambda_{i}\epsilon_{0}n_{c,i}^{2}n_{TE,s}}|\eta|^{2}, (3) where I p is the pump power density and the parameters: v_{TE} , n_{TE} , n_{TM} , c_{0} , \epsilon_{0} and n_{c} are the group velocity and effective refractive index of the excited modes, speed of light in vacuum, vacuum permittivity and refractive index of the WG core, respectively. The interacting fields overlap, |\eta|^{2} , greatly influences the photon pair generation rate and can be computed as: \eta=\iint_{W}d(x)E_{TE}(x,y)E_{TM}(x,y)E_{P}(x,y)\,dx\,dy. (4) Being; d , the InGaP nonlinear coefficienct (114 pm/V), E_{TE} and E_{TM} , the normalized profiles of the transverse electric fields and E_{P}(x,y) the pump beam amplitude profile in the WG with cross-section W, respectively. Figure 2: Interacting fields overlap, |\eta|^{2} , of a PM varying thickness InGaP slab WG with \lambda_{p} =726 nm before and after introducing the proposed modulation. (d(x) has been set to 1) As shown in Fig. 2 for an InGaP slab WG, |\eta|^{2} exhibits local maxima when the WG thickness is a multiple of the pump wavelength, being the global maximum at one pump wavelength thickness. The maximum obtainable |\eta|^{2} is \approx 0.06 |d|^{2} , and threefold efficiency enhancements are achievable for the most efficient PMS by implementing the equivalent APMS. Consider a 1 mm long 3 \mu m x 3 \mu m square WG with \overline{4}3m symmetry and a refractive index, n, of 3.5 and 3.2 at \lambda_{p} =726 nm and \lambda_{SPDC} =1526 nm, respectively. Square WGs do not exhibit form birefringence, ensuring that the resulting PM condition (eq.2) is readily satisfied at degenerated wavelengths. The pump amplitude profile, E p , will determine the efficiency of the SPDC process. When \lambda_{PUMP} = 726 nm, the WG accommodates 29 half pump oscillations. The product of the interacting field profiles along the WG vertical cross-section, shown in Fig.3, results in an interacting fields overlap |\eta|^{2}=9\cdot 10^{-15}\cdot|d|^{2} due to the \pi phase shift at subsequent antinodes and the pump electric field profiles interfering destructively at the center of the WG. Inverting the sign of the nonlinear coefficient, d_{25} , to compensate the \pi phase shift results in the additive contribution of the entire nonlinear media to the SPDC process ( |\eta|^{2}=0.17\cdot|d|^{2} ). Consequently, the PMS and the APMS exhibit an efficiency of 2.74 \cdot 10^{-15} and 0.052 photon pairs per pump photon, respectively. Figure 3: Product of the the pump profile

Read the complete text