Multi-Quadruped Cooperative Object Transport: Learning Decentralized Pinch-Lift-Move
Bikram Pandit, Aayam Kumar Shrestha, Alan Fern · 2025
Read Multi-Quadruped Cooperative Object Transport: Learning Decentralized Pinch-Lift-Move by Bikram Pandit, Aayam Kumar Shrestha, Alan Fern (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-14342.txt.
Introduction
Bikram Pandit, Aayam Kumar Shrestha and Alan Fern teach teams of legged robots to carry objects together in 2025. Each robot is a quadruped with an arm. The objects cannot be grasped, so robots must pinch, lift and move them by contact alone.
Unlike rigs that bolt robots to the load, these robots share no link, no messages and no central control. A layered policy separates walking from arm control. A constellation reward scores position and orientation together, pushing robots to act as if rigidly attached. Training with a staged curriculum builds the behaviour gradually. Success through reward design alone suggests contact itself can carry enough signal for tight team carrying.
Catalog record
| CREATOR | Bikram Pandit, Aayam Kumar Shrestha, Alan Fern |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-14342
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Multi-Quadruped Cooperative Object Transport: Learning Decentralized Pinch-Lift-Move Bikram Pandit, Aayam Kumar Shrestha, Alan Fern Abstract We study decentralized cooperative transport using teams of N N -quadruped robots with arm that must pinch, lift, and move ungraspable objects through physical contact alone. Unlike prior work that relies on rigid mechanical coupling between robots and objects, we address the more challenging setting where mechanically independent robots must coordinate through contact forces alone without any communication or centralized control. To this end, we employ a hierarchical policy architecture that separates base locomotion from arm control, and propose a constellation reward formulation that unifies position and orientation tracking to enforce rigid contact behavior. The key insight is encouraging robots to behave as if rigidly connected to the object through careful reward design and training curriculum rather than explicit mechanical constraints. Our approach enables coordination through shared policy parameters and implicit synchronization cues – scaling to arbitrary team sizes without retraining. We show extensive simulation experiments to demonstrate robust transport across 2-10 robots on diverse object geometries and masses, along with sim2real transfer results on lightweight objects. \IEEEsettextwidth 0.75in0.75in \IEEEsettopmargin t72pt I Introduction Object transport in local environments is central to construction, logistics, and emergency response. Legged robots are suited for such domains, as they can traverse terrain where wheeled platforms fail [ 1 , 2 ] . Yet many real-world objects—boxes, furniture, construction materials, logs, irregular containers—cannot be easily grasped or rigidly attached. Recent work in learning-based loco-manipulation shows that single humanoid and quadrupedal robots can lift and transport boxes through whole-body coordination [ 3 , 4 , 5 ] , but only for payloads within a single robot’s capacity. Larger/heavier objects require coordinated teams manipulating through sustained contact, raising a key question: how can multiple robots maintain stable contact, distribute forces, and coordinate motion without communication or centralized control? Existing decentralized approaches succeed mainly when robots are rigidly coupled to objects, where mechanical connections passively distribute forces and enforce coordination [ 6 , 7 , 8 ] . In contrast, manipulating ungraspable objects through contact alone is fundamentally harder: robots must establish and maintain contact, synchronize lifting, and stabilize payloads during motion—without mechanical guarantees or explicit communication. Our key insight is that coordination can still emerge if reward shaping encourages robots to behave as if rigidly attached to the payload, even though they are only connected through pinching forces. We propose decPLM ( Dec entralized P inch- L ift- M ove), a hierarchical control framework with a constellation-based reward that enables quadruped–arm teams to learn robust pinch–lift–move behaviors without communication/centralization. By aligning base and payload motion while maintaining relative poses, N -robot teams achieve the benefits of rigid coupling while retaining the flexibility of contact-based manipulation. Our main contributions are: (1) a constellation reward unifying position and orientation alignment to enforce rigid-like contact; (2) decentralized training that induces implicit synchronization without communication; (3) evidence that policies trained with small teams ( N{=}2 ) generalize to larger teams ( N{=}10 ) and diverse payloads. We further analyze when continuous payload tracking is necessary, and demonstrate sim-to-real transfer on physical quadruped–arm robots. Fig. 1 : Overview of decPLM ( Dec entralized P inch- L ift- M ove). Top-Left: Policy structure. Each robot runs the same decentralized policy that receives local proprioception, contact-frame command c_{\text{cf}} , and (optionally) contact frame pose in base frame {}^{b}T_{\text{cf}} , and outputs arm joint targets and base velocity commands. Bottom-Left: Training setup with two robots in simulation on a box. Middle: Generalization to larger teams and diverse payloads, including a box, a log, a barrel, and a couch. Right: Sim2Real Demonstration with 2, 3 and 4 Robots, each running decPLM \left(\text{const}^{+},\text{cf}^{\text{init}}\right) policy independently, without any inter-robot communication. II Related Work We categorize prior work into 3 approaches: (1) rigid mechanical coupling between robots and objects, (2) grasping-based manipulation with prehensile contacts, and (3) contact-only manipulation that typically involves planar pushing. In contrast, our approach combines decentralized coordination with contact-only lifting and transport of ungraspable objects. Rigidly Coupled Loco-Manipulation. Many successful systems assume mechanical constraints between robots and payloads-through closed chains, fixtures, or passive arms-which greatly simplifies force distribution and stability control [ 9 , 10 , 11 , 12 , 13 ] . Centralized approaches use model predictive control and hierarchical planning for mechanically coupled systems [ 6 , 7 ] , while passive-arm methods provide stabilization through mechanical compliance [ 8 ] . Recent work has shown that decentralized control can succeed when robots remain rigidly attached to payloads [ 14 ] . In contrast, our approach eliminates mechanical coupling entirely: robots must establish and maintain contact purely through learned policies, changing the coordination problem from force distribution to contact formation and maintenance. Grasping-Based and Tethered Systems. A second category relies on prehensile grasping or non-rigid connections like cables. Multi-robot grasp planning enables coordinated assembly and regrasping but requires reliable graspable features [ 15 ] . Cable-towed systems coordinate teams through explicit link dynamics, with taut/slack mode switching that simplifies connection maintenance during transport [ 16 , 17 ] . While some fully decentralized approaches exist [ 18 ] , they still assume reliable attachment mechanisms. These approaches sidestep the core challenge we address: maintaining coordinated contact without mechanical fixtures or tethers. Contact-Only, Decentralized Manipulation. Non-prehensile manipulation through contact alone has primarily focused on planar pushing of supported objects, avoiding the challenges of lifting and three-dimensional transport [ 19 , 20 , 21 ] . While Single-robot whole-body manipulation has achieved impressive force and position control [ 22 , 23 , 24 , 25 ] , scaling to cooperative lifting remains unexplored. Moreover multi-agent reinforcement learning has developed relevant coordination mechanisms - hierarchical policies, shared representations, and scalable architectures [ 26 , 27 , 28 , 29 , 30 ] - but has not addressed the specific challenge of maintaining coordinated contact during cooperative lifting. Our approach fills this gap by enabling multiple robots to perform coordinated pinch-lift-move behaviors through contact alone, without mechanical coupling or communication. III Problem Formulation We consider decentralized cooperative transport where a team of N quadrupedal robots must transport a single rigid-body object, which we refer to as the payload . The payload is assumed to be ungraspable, that is, it cannot be rigidly attached to any robot and must instead be manipulated through physical contact at its surfaces using contact pads attached to each robot’s arm. The robots must coordinate to pinch , lift , and move the payload so that it tracks a commanded motion trajectory of the payload. In this paper, we focus on the decentralized pinch-lift-move (PLM) control problem and assume a higher-level planner that provides: (1) contact frames on the payload, one per robot, that allows force closure; (2) a synchronized start signal to initiate the collaborative pinch and lift maneuver; and (3) velocity commands for the payload transformed into contact-frame coordinates for each robot. We assume that each pinch-lift-move episode begins with robots positioned within specified tolerance of their contact frames. III-A Technical Formulation More formally, we assume a team of N quadruped robots, each equipped with a single arm whose end-effector is a flat contact pad. The N -robot PLM problem is specified through N contact frames