The influence of dimensional crossover on phase transitions and critical phenomena in condensed systems

O. V. Chalyi, E. V. Zaitseva · 2025

Read The influence of dimensional crossover on phase transitions and critical phenomena in condensed systems by O. V. Chalyi, E. V. Zaitseva (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-13799.txt.

Introduction

Chalyi and Zaitseva review dimensional crossover in a 2025 condensed matter article. Near a phase transition, squeezing a material changes its critical behavior. Thin films or narrow pores do the squeezing. Fluctuations of the order parameter start to feel the sample size. Temperature and pressure are no longer the only controls.

The authors lay out the theory for several regimes. One covers systems where the Ginzburg number separates fluctuation-dominated from regular behavior. Another covers crossovers from three dimensions down to two or one. Slit and cylinder shapes decide which drop occurs. A third topic is the fine structure of molecular light scattering near the transition. They also propose wider equalities among critical exponents, treating the fractal dimension as an exponent in its own right.

Catalog record

CREATORO. V. Chalyi, E. V. Zaitseva
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-13799

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The influence of dimensional crossover on phase transitions and critical phenomena in condensed systems O. V. Chalyi, E. V. Zaitseva Abstract This article is aimed at studying the effects of the dimensional crossover (DC) on physical properties of condensed systems near phase transition and critical points. Here we consider the following problems: (1) the theoretical provisions that allow to study the effect of spatial confinement on DC near phase transition and critical points; (2) the study of DC in condensed systems with the Ginzburg number Gi < 1 \mathrm{Gi}<1 , where fluctuation effects are described in different ways at the fluctuation, regular and intermediate (crossover) regions; (3) two types of DC were investigated: (a) a decrease in the linear dimensions L L to the values of the correlation length of the order parameter fluctuations leads to the conversion of the dependence on thermodynamic variable into a dependence on linear sizes of 3D systems, as well as (b) a further decrease in linear sizes L L the 3D–2D or 3D–1D DC happens depending on slitlike or cylindrical geometry, which is determined by the value of the lower crossover dimensionality d LCD d_{\rm LCD} ; (4) it is proposed to extend the known equalities for critical exponents by using the Mandelbrot formula for fractal dimension D f D_{f} as a critical exponent; (5) the influence of 3D–2D DC on the characteristics of the fine structure of the molecular light scattering (MLS) spectrum is studied. Key words: dimensional crossover, critical exponents, bounded (confined) liquids, lower crossover dimensionality, fractal dimension, diffusion coefficient This review article is dedicated to the 100th anniversary of the birth of the outstanding theoretical physicist Igor Yukhnovskii 1 Introduction The influence of various thermodynamic variables, as well as spatial confinement, on critical phenomena and phase transitions were actively studied in many systems of experimental, theoretical and practical interest such as bounded fluids and liquid crystals, low-dimensional magnetic systems, confined soft matter systems, few-layer graphene, carbon nanotubes, porous media, biological membranes, vehicles, synaptic clefts, etc. [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 ] . The problem that the authors intend to discuss in this review article, dedicated to the 100th anniversary of the birth of the outstanding theoretical physicist Igor Yukhnovskii, can be formulated as follows: How the results of 3d bulk systems transfer to the results of 3d bounded, 2D, 1D, 0D systems and vice versa? Obviously, such transitions, which may be called “dimensional crossover” , cannot occur abruptly, but must be associated with a fairly smooth and continuous change in physical properties (for example, such critical parameters as critical exponents of scaling laws or critical values of temperature, density, pressure, etc.). The basis for this statement is the results of theoretical studies of the layer-by-layer ordering and the dimensional crossover (DC), as well as the results of computer-simulation studies [ 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 ] . When theoretically describing a DC, it is necessary to take into account the following factors: 1) specific effects of spatial limitations, 2) numerical values of the critical exponents in systems with various spatial dimensions d belonging to different universality classes, 3) corresponding experimental results. Here, we study the effect of changes in the physical properties of spatially bounded (in other words, finite-size or confined) systems as a result of a DC of the following two types [ 12 , 13 , 14 , 15 ] . The 1st type DC-1 corresponds to the transition from 3-dimensional bulk systems to 3-dimensional confined systems, when the linear size L in the direction of spatial confinement approaches the correlation radius \xi of fluctuations of the order parameter (for single-component fluids, these are density fluctuations). In this case, the dependence of physical properties on thermodynamic variables for large linear sizes L\gg\xi converts into the dependence of these properties on linear sizes in confined systems with L\lesssim\xi . The 2nd type DC-2 corresponds to the case when a further decrease of linear sizes L in confined systems could be treated under certain conditions as a smooth change in linear dimensions (for example, a crossover between 3D and 2D systems in slitlike pores or a crossover between 3D and 1D in cylindrical pores). To study the DC effects, the concept of lower crossover dimension (dimensionality) D_{\rm LCD} should be introduced (see the 3rd column in table 1 ). The value of the D_{\rm LCD} for real bounded 3D systems (1st column) determines the limiting spatial dimension of geometric objects (2nd column), when the linear dimensions of systems in the direction of spatial limitation reach their minimum values. As far as the authors know, the D_{\rm LCD} concept was introduced for the first time in [ 9 ] . Table 1: Numerical values of the lower crossover dimension D_{\rm LCD} for real 3-dimensional bounded systems. Real bounded 3D systems Corresponding limiting geometric objects Lower crossover dimension D_{\rm LCD} Plane-parallel layer, slitlike pore, membrane, synaptic cleft Molecular plane 2 Cylindrical pore, bar, ionic channel Molecular line 1 Spherical or cubic samples, vesicle Point (one molecule) 0 There is another important concept of universality classes that plays a fundamental role in using the theory of phase transitions and critical phenomena to describe similar phenomena in the living and inanimate nature (see, for example, [ 12 , 13 , 16 , 17 , 18 , 19 , 20 , 21 ] and references there). According to this concept, the phenomena of different nature belonging to the same universality class are characterized by a similar behavior near the critical points and points (lines) of phase transitions if such common conditions are satisfied for all of them. These basic conditions for bulk and bounded systems are presented in table 2 . Table 2: Necessary conditions of universality classes for bulk and bounded soft matter systems. Basic conditions of universality classes for bulk systems Additional conditions of universality classes for bounded systems 1. The same spatial dimension. 5. The same type of geometry (lower crossover dimension). 2. The same order parameter dimension. 3. The same type of intermolecular interaction (short-range or long-range). 6. The same type of boundary conditions (hydrophilic, hydrophobic, intermediately wetted). 4. The same symmetry of fluctuation Ginzburg-Landau Hamiltonian (the fluctuation parts of thermodynamic potentials). 7. The same physico-chemical properties under consideration (due to non-universal constants in the conditions of extremes for these properties). The results obtained for the 2D–3D crossover are used as biomedical applications for studying the size dependence of the characteristics of molecular light scattering (MLS). In this regard, it should be noted (see, for example, [ 15 , 22 ] and references therein) that the John Strutt (Lord Rayleigh) scattering corresponds to such an electrodynamics problem for which only the contribution from the electric dipole is taken into account in a spherical particle with a radius considerably smaller than the wavelength of the electromagnetic radiation incident on this particle. It means that in the formula for the intensity of the scattered light (for the Umov–Poynting vector), only the coherent dipole scattering of

Read the complete text