Frequency stability of 2.5 × 10 − 17 2.5\times 10^{-17} in a Si cavity with AlGaAs crystalline mirrors

Dahyeon Lee, Zoey Z. Hu, Ben Lewis, Alexander Aeppli, Kyungtae Kim, Zhibin Yao, Thomas Legero, Daniele Nicolodi, Fritz Riehle, Uwe Sterr, Jun Ye · 2025

Read Frequency stability of 2.5 × 10 − 17 2.5\times 10^{-17} in a Si cavity with AlGaAs crystalline mirrors by Dahyeon Lee, Zoey Z. Hu, Ben Lewis, Alexander Aeppli, Kyungtae Kim, Zhibin Yao, Thomas Legero, Daniele Nicolodi, Fritz Riehle, Uwe Sterr, Jun Ye (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-13503.txt.

Introduction

Dahyeon Lee, Zoey Hu and nine co-authors reach in 2025 a record laser frequency stability in a silicon cavity with crystalline mirrors. Ultrastable lasers drive frequency metrology and quantum science. AlGaAs coatings promise low noise, yet excess noise curbed past cryogenic gains.

A new mirror pair in a short cryogenic silicon cavity at low temperature changes the picture. Stability beats dielectric expectations by fourfold at ten seconds. Coating loss drops by over tenfold. Two cavities combine for optical averaging gains. Multi-year drift records for four cavities are given. Paths to far higher stability and an all-optical timescale open.

Catalog record

CREATORDahyeon Lee, Zoey Z. Hu, Ben Lewis, Alexander Aeppli, Kyungtae Kim, Zhibin Yao, Thomas Legero, Daniele Nicolodi, Fritz Riehle, Uwe Sterr, Jun Ye
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-13503

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Frequency stability of 2.5 × 10 − 17 2.5\times 10^{-17} in a Si cavity with AlGaAs crystalline mirrors Preprint: APS/123-QED Dahyeon Lee, Zoey Z. Hu, Ben Lewis, Alexander Aeppli, Kyungtae Kim, Zhibin Yao, Thomas Legero, Daniele Nicolodi, Fritz Riehle, Uwe Sterr, Jun Ye Abstract Developments in ultrastable lasers have fueled remarkable advances in optical frequency metrology and quantum science. A key ingredient in further improving laser frequency stability is the use of low-noise mirror materials such as AlGaAs crystalline coatings. However, excess noise observed with these coatings limits the performance of cryogenic silicon cavities with AlGaAs mirrors to similar levels achieved with conventional dielectric coatings. With a new pair of crystalline coated mirrors in a 6-cm-long cryogenic silicon cavity operated at 17 K, we demonstrate a clear advantage of crystalline coatings over dielectric coatings. The achieved fractional frequency stability of 2.5 × 10 − 17 2.5\times 10^{-17} at 10 s is four times better than expected for dielectric mirrors and corresponds to more than tenfold reduction in the coating mechanical loss factor. We also combine two silicon cavities to demonstrate optical frequency averaging for enhanced stability. In addition, we present a long-term frequency drift record of four cryogenic silicon cavities measured over several years. These results open up realistic prospects for cavity-stabilized lasers with 10 − 18 10^{-18} fractional stability, as well as an all-optical timescale with continuously operating optical local oscillators. Introduction . Ultrastable optical interferometers form the backbone of optical atomic clocks Ludlow et al. 2015 , tabletop tests of fundamental physics Kennedy et al. 2020 ; Müller et al. 2003 ; Wiens et al. 2016 ; Wcisło et al. 2016 , and gravitational wave detectors Harry et al. 2006a ; Adhikari et al. 2020 . Cryogenic silicon cavities continue to push the state-of-the-art in optical cavity frequency stability, reaching thermal noise-limited fractional frequency stability of 3.5\times 10^{-17} up to thousands of seconds Oelker et al. 2019 ; Matei et al. 2017 . Despite this impressive performance, cavity-stabilized laser frequency noise is still the limiting factor in improving optical clock stability. To improve the frequency stability of optical cavities even further, the fundamental Brownian thermal noise of the mirror coatings needs to be mitigated, for example, by going to lower temperatures Robinson et al. 2019 ; Valencia et al. 2024 ; He et al. 2023 ; Barbarat et al. 2024 ; Wiens et al. 2016 , enlarging the mode area, utilizing novel mirror coating materials that exhibit lower Brownian noise Cole et al. 2013 ; Truong et al. 2023 ; Dickmann et al. 2023 ; Harry et al. 2006b , or indirectly scaling down the noise contribution by using a longer cavity Häfner et al. 2015 ; Álvarez 2019 ; Parke and Schioppo 2025 . While all of these approaches are actively pursued, mirror coatings based on stacks of crystalline GaAs/AlGaAs have recently attracted significant attention Cole et al. 2013 ; Kedar et al. 2023 ; Yu et al. 2023 ; Herbers et al. 2022 ; Valencia et al. 2024 ; Kraus et al. 2025 ; Zhu et al. 2024 ; Didier et al. 2018 , with possible applications reaching as far as next-generation gravitational wave detectors Cole et al. 2023 . These mirrors have lower thermal noise compared to conventional dielectric mirrors due to their lower mechanical loss factor Penn et al. 2019 ; Numata et al. 2004 ; Kessler et al. 2011 , and can achieve high finesse critically required for ultrastable optical cavities. These desirable qualities make crystalline mirrors an attractive candidate to replace conventional dielectric mirror coatings for high-performance optical cavities. However, our previous investigations on cryogenic silicon cavities with crystalline mirrors revealed several novel noise mechanisms that hinder reaching the Brownian thermal noise Kedar et al. 2023 ; Yu et al. 2023 . One of the excess noise sources was found to be associated with the birefringence of the crystalline coatings, in which two birefringently split cavity modes showed anti-correlated noise at a level significantly higher than the expected thermal noise. Although the birefringent noise could be suppressed to a sufficiently low level by averaging the frequencies of the two cavity modes, the thermal noise floor of the crystalline coatings still could not be reached because of yet another source of excess “global” noise that appeared in two independent systems at JILA and PTB. Unlike the Brownian noise, whose correlation length is on the order of the \mu m-scale coating thickness, the global noise was correlated over the mm-scale mode area and thus could not be lowered by using a larger mode size Yu et al. 2023 . The origin of the excess noise is not clear and may be related to coating impurities, defects, or variations in the bond strength, while it could also be the thermal noise of the mirror optical contact area and the cavity supports. Due to this excess global noise, the frequency stabilities of cryogenic silicon cavities with crystalline mirrors have been limited to levels comparable to those of similar cavities with conventional dielectric mirrors, leaving the full potential of crystalline mirrors unfulfilled. In this work with a 17 K cryogenic silicon cavity, we demonstrate for the first time clear superiority of crystalline \text{Al}_{0.92}\text{Ga}_{0.08}\text{As} coatings over conventional dielectric mirrors. The frequency stability of 2.5\times 10^{-17} , expressed in modified Allan deviation, is a factor of 4 better than the thermal noise limit of an equivalent cavity with conventional dielectric \text{Si}\text{O}_{2}/\text{Ta}_{2}\text{O}_{5} coatings. In addition, we implement optical frequency averaging of two state-of-the-art silicon cavities to improve frequency stability. Finally, we compare the long-term drift rates of four silicon cavities in PTB and JILA compiled over more than 10 years. Frequency stability . Our 6-cm-long silicon cavity uses two 1 m radius of curvature mirrors made of alternating layers of crystalline GaAs/AlGaAs on a silicon substrate. The 12.0\text{-}\mu\text{m} -thick crystalline mirror coating comprises 48.5 repeats of quarter-wave high-index GaAs and low-index \text{Al}_{0.92}\text{Ga}_{0.08}\text{As} layers, beginning and ending with the GaAs layer. The cavity finesse is 470 000 at the operating wavelength of 1542 nm, corresponding to a cavity linewidth of 5 kHz. The double-cone shaped cavity is vertically mounted from its midplane to reduce vibration sensitivity Notcutt et al. 2005 . Vibration noise from the cryostat is mitigated with the split-plate design and an active vibration isolation table as described in Refs. Zhang et al. 2017 ; Robinson et al. 2019 , so that vibration noise does not degrade cavity performance at Fourier frequencies below 3 Hz except for discrete peaks at harmonics of the 1 Hz cryostat cycle frequency. The cavity is cooled with a closed-cycle cryostat to 17 K, where the coefficient of thermal expansion of silicon is zero Wiens et al. 2014 . Thermal isolation from the environment is achieved with multiple layers of shielding, including a radiation shield, an actively controlled outer shield, and a passive inner shield. A 1542 nm fiber laser is locked to the cavity with the Pound-Drever-Hall technique Drever et al. 1983 ; Black 2001 . Residual amplitude modulation (RAM) is actively suppressed well below the cavity thermal noise limit with the AOM FM-triplet scheme described in Ref. Kedar et al. 2024 , which allows us to operate the system at shot noise-limited

Read the complete text