Programmable Optical Filters Based on Feed-Forward Photonic Meshes Journal: opticajournal
Carson G. Valdez, Anne R. Kroo, Marek Vlk, Charles Roques-Carmes, Shanhui Fan, David A. B. Miller, Olav Solgaard · 2025
Read Programmable Optical Filters Based on Feed-Forward Photonic Meshes Journal: opticajournal by Carson G. Valdez, Anne R. Kroo, Marek Vlk, Charles Roques-Carmes, Shanhui Fan, David A. B. Miller, Olav Solgaard (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-12059.txt.
Introduction
Carson G. Valdez and 6 co-authors demonstrate a programmable optical filter in a 2025 paper. The device is an integrated photonic circuit, a chip that guides light instead of electricity. Its feed-forward photonic mesh can be reconfigured to perform different spectral filter functions, selecting which wavelengths of light pass or are blocked.
In experiments, a triangular mesh with four inputs and three layers used self-configuration algorithms to filter three chosen wavelengths from an incoming spectrum. Pre-set filters could be swept continuously across the device's range, so the design does not lock in one center wavelength at manufacture. The team showed wavelength rejection as deep as forty decibels and channel separation for dense wavelength division multiplexing, a method that sends many signals at once, with low crosstalk.
Catalog record
| CREATOR | Carson G. Valdez, Anne R. Kroo, Marek Vlk, Charles Roques-Carmes, Shanhui Fan, David A. B. Miller, Olav Solgaard |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-12059
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Programmable Optical Filters Based on Feed-Forward Photonic Meshes Journal: opticajournal Carson G. Valdez, Anne R. Kroo, Marek Vlk, Charles Roques-Carmes, Shanhui Fan, David A. B. Miller, Olav Solgaard Abstract We demonstrate an integrated photonic circuit based on feed forward photonic meshes that can be programmed and reconfigured to perform arbitrary spectral filter functions. We investigate a subset of the available filter functions, demonstrating that a N = 4 N=4 input triangular mesh with M = 3 M=3 layers may be operated via self-configuration algorithms to filter M M arbitrary wavelengths from a given input spectrum. The tunable nature of the architecture enables preconfigured filter functions to be swept in the spectral domain continuously over the free spectral range of the device. This removes any strict requirements between the design parameters of the architecture and the center wavelength of a desired filter function. With this architecture, we experimentally demonstrate arbitrary wavelength rejection filters with contrasts as deep as 40 dB. Further, by intentionally selecting the center wavelengths of each filter function to lie along a wavelength grid defined by Δ λ = λ f s r / N \Delta\lambda={\lambda_{fsr}}/{N} we demonstrate deep wavelength division demultiplexing (DWDM) with inter-channel crosstalk between -25 dB and -40 dB. Unlike typical DWDM systems, in this architecture the center wavelength of each channel is not fixed at fabrication and instead may be swept or reordered arbitrarily. This device demonstrates advantages over typical methods for DWDM, Raman spectroscopy, and correlation spectroscopy as well as other applications. Spectral filters are ubiquitous components used in nearly every optical application spanning telecommunications [ 1 , 2 ] , environmental sensing [ 3 , 4 ] , astrophysics [ 5 , 6 ] , and biomedical sensing [ 7 ] . Integrated spectral filters such as arrayed waveguide gratings [ 8 , 9 ] and distributed Bragg reflectors [ 10 , 11 ] have long offered a path toward miniaturization. Employing additional local heating elements to shift the spectral band of these devices has provided a degree of tunability [ 12 , 13 ] ; however, this method cannot change the spectral profile of the device. Traditional fixed-function photonic filters offer high performance but lack flexibility, requiring separate device designs and fabrication runs for each target function. Programmable filters enable a single hardware platform to implement a wide range of spectral responses, enabling further applications including all-optical signal processing [ 14 ] and correlation spectroscopy [ 15 ] . Programmable spectral filters have been realized utilizing a number of recirculating mesh architectures [ 14 , 16 , 17 , 18 ] . In these systems, light is routed through closed-loop paths that provide spectral selectivity via interference and resonance effects. Figure 1 : ( Top ) Schematic diagram of a four channel programmable spectral filter. ( Bottom ) Microscope image of the fabricated photonic integrated circuit. The photonic circuit is comprised of three subcircuits: a power splitter, an array of waveguide delay lines, and a photonic mesh. Here the power splitting subcircuit has been implemented via a two stage binary tree of balanced MZIs. The array of N waveguide delay lines introduces the phase shifts \phi_{p} to each respective waveguide. The array of waveguide delay lines has been designed with a uniform increment \Delta{L}= 740 \upmu m to introduce a linear phase tilt. The photonic mesh applies a programmable matrix transformation O , described by matrix elements O_{pq} . We implement this subcircuit as an N=4,M=3 triangular mesh capable of implementing any linear unitary 4\times 4 matrix transformation. Feed-forward based photonic meshes may be operated using progressive optimization algorithms which enable distinct functionalities that have been widely demonstrated for spatial mode processing [ 19 , 20 , 21 , 22 , 23 ] . However, these architectures are typically designed for broadband operation, lacking the strong wavelength dependence necessary to generate spectral filters. Recently we have laid the analytical groundwork for a photonic integrated circuit (PIC) architecture based on feed-forward photonic meshes capable of performing arbitrary filter functions [ 24 ] . Here we experimentally demonstrate that such a device is capable of filtering multiple arbitrary wavelengths while being programmed via a self-configuration algorithm. Such an algorithm automatically adapts a layer of the mesh to reject an arbitrarily given wavelength. Each layer of the photonic mesh is capable of filtering an additional independent wavelength from its respective outputs. This programmable nature of the photonic mesh enables filter functions to be dynamically adjusted post fabrication. We demonstrate a subset of the array of filter functions which may be implemented by this architecture. From among the possible filter functions, we demonstrate a bandpass filter whose center wavelength may be continuously tuned across a free spectral range. We implement a series of notch filters, demonstrating that multiple arbitrary wavelengths may be rejected from the outputs of the mesh with a contrast as deep as 40 dB. By choosing the filtered wavelengths to be in close proximity to each other, we are able to form a wide band rejection filter spanning a large portion of the free spectral range. Further, by choosing the filtered wavelengths to correspond to a designed wavelength grid, we perform wavelength division demultiplexing. Unlike typical DWDM systems whose wavelength grid is determined at fabrication, the wavelength grid of this architecture may be determined by self-configuration algorithms and adjusted dynamically. Results Theory and Modeling The architecture of this programmable filter consists of three subcircuits as displayed in figure 1 : a 1\times N arbitrary power splitter, an array of N waveguide delay lines, and an M\times{N} programmable photonic mesh. In this section, we derive the transfer function of such an architecture, similar to [ 24 ] , albeit with a different choice of reference waveguide and indexing system to closely match the physical implementation of the architecture developed in this work. For the analysis of this system, we assert the simplifying assumption that over a reasonable bandwidth, the operations of both the power splitting and photonic mesh subcircuits are wavelength independent. This means that any wavelength dependence of the system results entirely from path length differences introduced in the array of waveguide delay lines. In a practical implementation, this condition is satisfied to first order by ensuring that all possible paths through these subcircuits are of equal length as shown in figure 1 . The power splitting subcircuit divides a single input between N=4 output waveguides with programmable splitting ratios such that the output complex fields at each waveguide may be adjusted dynamically. The complex field at each output of the power splitter is given by a_{p} . We assume that the device is lossless such that the input power is conserved as the sum of all output powers. However, a constant overall loss in the circuit may be treated as a pre-factor without impacting the following spectral analysis. This is expressed through Eq. 1 where the variable p serves as an index of the N=4 output waveguides of the power splitting subcircuit. \sum_{p=0}^{N-1}|a_{p}|^{2}=1 (1) The 1\times 4 power-splitting subcircuit has been implemented via a two-stage binary tree of balanced Mach-Zehnder Interferometers, which have internal paths with equal length [ 20 ] . Each MZI is composed of a