Frequency evolution of pulsar emission:

P. Jaroenjittichai ,, S. Johnston, S. Dai, M. Kerr, M. E. Lower, R. N. Manchester, L. S. Oswald, R. M. Shannon ,, C. Sobey ,, P. Weltevrede · 2025

Read Frequency evolution of pulsar emission: by P. Jaroenjittichai ,, S. Johnston, S. Dai, M. Kerr, M. E. Lower, R. N. Manchester, L. S. Oswald, R. M. Shannon ,, C. Sobey ,, P. Weltevrede (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-11945.txt.

Introduction

How pulsar beams change shape with observing frequency is the puzzle P. Jaroenjittichai and nine co-authors revisit in 2025, using wideband observations from the Murriyang telescope at Parkes. More than a hundred pulsars were recorded across a broad frequency span.

The team measured profile widths at several intensity levels, broke profiles into Gaussian parts, and estimated emission heights from aberration and retardation effects. Many profiles narrow as frequency rises, but a sizable share widen instead, and the component peaks barely move while their widths shrink. That pattern points to propagation effects, not a single emission height sliding downward, favoring fan-shaped or patchy beams spread over many altitudes. The classic one-height picture, the authors conclude, cannot cover the variety seen.

Catalog record

CREATORP. Jaroenjittichai ,, S. Johnston, S. Dai, M. Kerr, M. E. Lower, R. N. Manchester, L. S. Oswald, R. M. Shannon ,, C. Sobey ,, P. Weltevrede
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE50 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-11945

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Frequency evolution of pulsar emission: P. Jaroenjittichai ,, S. Johnston, S. Dai, M. Kerr, M. E. Lower, R. N. Manchester, L. S. Oswald, R. M. Shannon ,, C. Sobey ,, P. Weltevrede Abstract Context. Aims. We explore frequency-dependent changes in pulsar radio emission by analyzing their profile widths and emission heights, assessing whether the simple radius-to-frequency mapping (RFM) or the fan beam model can describe the data. Methods. Using wideband (704–4032 MHz) Murriyang (Parkes) observations of over 100 pulsars, we measured profile widths at multiple intensity levels, fitted Gaussian components, and used aberration–retardation effects to estimate emission altitudes. We compared trends in width evolution and emission height with a fan beam model. Results. Similar to other recent studies, we find that while many pulsars show profiles narrowing with increasing frequency, a substantial fraction show the reverse. The Gaussian decomposition of the profiles reveals that the peak locations of the components vary little with frequency. However, the component widths do, in general, narrow with increasing frequency. This argues that propagation effects are responsible for the width evolution of the profiles rather than emission height. Overall, the evolution of the emission height with frequency is unclear, and clouded by the assumptions in the model. Spin-down luminosity correlates weakly with profile narrowing but not with emission height. Conclusions. The classic picture where pulsars emit at a single emission height which decreases with increasing observing frequency cannot explain the diversity in behavior observed here. Instead, pulsar beams likely originate from extended regions at multiple altitudes, with fan-beam or patchy structures dominating their frequency evolution. Future models must incorporate realistic plasma physics and multi-altitude emission to capture the range of pulsar behaviors. Further evidence for fan beam model 1 Introduction It is a well-established idea that the profiles of radio pulsars are narrower at higher radio frequencies ( Cordes 1978 ). This trend is exemplified by pulsars such as PSR B1133+16, where the two components of its profile move closer together as the observing frequency increases ( Hassall et al. 2012 ). Empirically, Thorsett 1991 quantified the frequency evolution of the component separations with a power-law. We generalized their relation as follows: W_{x}=A_{x}\nu^{\mu_{x}}+W_{x,0}, (1) where W_{x} represents the profile width at x\% of the peak intensity, \nu is the observing frequency, \mu_{x} characterizes the frequency scaling, and W_{x,0} represents the asymptotic width. Multi-frequency data for tens pulsars analyzed in the 1990s can be fit by the Thorsett relation, seemingly confirming the general narrowing of profile width at high frequencies (e.g. Xilouris et al. 1996 ; Kijal & Gil 1998 ; Mitra & Rankin 2002 ). The frequency-dependent profile evolution was called “radius-to-frequency mapping (RFM)” in the literature and is interpreted as meaning that high frequency radio emission arises close to the neutron star surface, whereas low frequency originates higher in the magnetosphere. This is due to the fact that the emission cone opening angle increases with altitude. However, with a larger sample of pulsars available by 2010, it became obvious that not all pulsars conform to this idea. Chen & Wang 2014 analyzed 150 pulsars and found that \sim 54% showed a significant profile narrowing at high \nu , but a sizable fraction ( \sim 19%) exhibited broadening at high frequencies, with the rest showing little change. Similarly, Posselt et al. 2021 investigated profile width evolution with frequency for 762 pulsars, revealing that many pulsars exhibit width broadening at higher frequencies, contrary to expectations. Such broadening trends cannot be explained by the simplistic RFM picture. Figure 1: Profile width evolution of PSR J0738–4042. The figure on the left shows the stack of normalized profiles, with the profile peak placed at 180° for each sub-band. ( Middle ) The profile width has been measured at varying intensity levels, shown from dark to light colors, in relation to frequency. The dashed lines represent the best-fit solutions of Eqn. 1 . The resulting parameters as a function of profile intensity level is shown in the right panel. The black, blue, and red represent the amplitude, A , the power index, \mu , and the y-offset, W_{0} , respectively. Figure 2: Distribution of frequency evolution index ( \mu ) of profile width measured at different profile intensity level ( W_{\rm x} ) for 144 pulsars. The 2D contour map shows the counts weighted by the uncertainty of each data point. An alternative fan beam model has emerged to address these issues (e.g. Dyks et al. 2010 ; Dyks & Rudak 2015 ; Wang et al. 2014 ; Dyks & Pierbattista 2015 ). Unlike the traditional nested cone model, the fan beam model explains profiles as arising from structured, azimuthally elongated beams rather than symmetric, concentric rings. The emission consists of elongated streams or fan-like beams of radiation from plasma flowing along specific magnetic field lines, creating a pattern of emission that resembles spokes on a wheel when viewed along the pulsar’s magnetic axis (see e.g. Fig. 2 in Dyks & Rudak 2015 ). Dyks & Pierbattista 2015 argued that the observed peak separation ratio ( R_{W} ) in pulsar profiles is not consistent with the conal model but is well explained by the fan beam model. They analyzed pulsar profiles with four and five components and measured the separations between these components. They found that the conal model predicts a narrow, sharply peaked distribution of R_{W} , while the observed data show a broader, flatter distribution. The fan beam model, on the other hand, naturally produces the observed distribution. Oswald et al. 2019 studied PSR B1133+16, the pulsar largely responsible for the RFM model, using single-pulse observations at multiple radio frequencies. By comparing the observed frequency-dependent profile broadening with simulations, they demonstrated that profile widening at lower frequencies is more consistent with azimuthally elongated emission patches rather than simple nested cones. The fan beam model therefore serves as an alternative for statistical distributions of peak separations, frequency-dependent broadening, and single-pulse characteristics. In this paper we measure profile width and emission height evolution across frequencies from 704 MHz to 4.032 GHz. Section 2 describes our dataset from Murriyang observations. Section 3 outlines our methodology. Section 4 presents our results on profile characteristics and emission heights. Section 5 discusses these findings and proposes a simple fan beam model. Section 6 summarizes our conclusions about pulsar emission geometry. 2 Dataset The pulsars for this project were observed with Murriyang, CSIRO’s Parkes radio telescope, under the auspices of project ID P574. The P574 project in its current form has been observing some 250 pulsars per month since late 2018 ( Johnston et al. 2021 ) . Observations are made with the Ultra-Wideband Low (UWL) receiver ( Hobbs et al. 2020 ) operating in the frequency range 704 to 4032 MHz. The data reduction is identical to that described in Sobey et al. 2021 and also used by Oswald et al. 2023 . In brief, the dataset we use here consists of flux and polarization calibrated profiles, with 1024 phase bins across the pulse period. The bandwidth of the UWL is divided into eight subbands, with center frequencies 822, 1070, 1420, 1780, 2107, 2766, 3258 and 3810 MHz. Of the 250 pulsars regularly observed as part of P574 we removed pulsars with low flux

Read the complete text