Image-based modelling of rock non-linear deformation under low-stress levels Journal: Computer methods in applied mechanics and engineering
Rui Li, Yi Yang, Wenbo Zhan, Jianhui Yang, Yingfang Zhou · 2025
Read Image-based modelling of rock non-linear deformation under low-stress levels Journal: Computer methods in applied mechanics and engineering by Rui Li, Yi Yang, Wenbo Zhan, Jianhui Yang, Yingfang Zhou (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-11228.txt.
Introduction
Rocks squeezed gently behave in a nonlinear way. This 2025 geomechanics paper by Rui Li and four co-authors simulates that behavior from images. At low stress, tiny cracks and grain contacts close up. The rock stiffens before settling into ordinary elastic response.
Image-based models usually miss this effect. Single image voxels are bigger than the cracks. Each voxel mixes pore space with solid. The authors treat mixed voxels as a transitional material. Its stiffness is middling. Its pore part deforms first. Finite element simulations then run on the digital rock. Two Bentheimer sandstone models served as tests. The method reproduced how porosity changes as stress rises. It also reproduced the elastic property changes.
Catalog record
| CREATOR | Rui Li, Yi Yang, Wenbo Zhan, Jianhui Yang, Yingfang Zhou |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 48 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-11228
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Image-based modelling of rock non-linear deformation under low-stress levels Journal: Computer methods in applied mechanics and engineering Rui Li, Yi Yang, Wenbo Zhan, Jianhui Yang, Yingfang Zhou Abstract Rock geophysical properties are widely reported to exhibit non-linear behaviours under low-stress conditions (below 10-20 MPa) before transitioning to the linear elastic stage, primarily due to the closure of microcracks and grain interfaces. Image-based modelling of rock deformation struggles to effectively characterise the microcrack closure effect because of the partial-volume effect, where image voxels are larger than microcracks and contain both pore and solid phases. This study presents a novel method to simulate non-linear rock deformation under elevated stress conditions. The method reconstructs digital rock models by treating partial-volume voxels as transitional phases that incorporate microcracks. By assigning intermediate elastic moduli and assuming that the pore portion within each partial-volume voxel deforms before the remaining solid content, the method employs the finite element method to simulate rock deformation and calculate the porosity of the deformed model. The method is tested on two Bentheimer sandstone models, and the results demonstrate its ability to predict the non-linear changes in porosity and elastic properties as the effective stress increases. This work provides a new pathway for image-based modelling of non-linear rock deformation considering the microcrack closure effect, offering valuable insights into the complex mechanical behaviour of rocks under confinement. † † highlights: Rocks experience non-linear deformation at low-stress levels (below 10-20 MPa) due to the closure of microcracks. A novel image-based modelling method is proposed to characterise the rock non-linear deformation. This method is tested on sandstone models and successfully predicts the non-linear variations in rock porosity and elastic properties. 1 Introduction Studying the mechanical deformation processes of rocks is crucial for many engineering applications performed under low-stress levels (typically less than 10-20 MPa), such as oil and gas production in shallow formations ( Rezaei et al. 2020 ; Wang et al. 2021a ; Aydin and Merey 2021 ) , geothermal energy extraction ( Baria et al. 1999 ; Liu and Zhou 2022 ; Hu et al. 2024 ) , underground carbon dioxide storage ( Rutqvist et al. 2002 ; Bao et al. 2021 ) , and civil engineering design ( Cong et al. 2020 ; Bao et al. 2022 ; Asemi et al. 2024 ) . Many studies analysing stress-strain relationships from rock compression tests have shown that rocks, particularly sandstones, often undergo non-linear deformation before reaching a linear stage ( Lionço and Assis 2000 ; Zhu et al. 2002 ; Corkum and Martin 2007 ; Wang et al. 2021a ; Lin et al. 2024 ) . Additionally, the geophysical properties of rocks can change significantly during this non-linear deformation process. For example, properties such as porosity and permeability may drastically decrease ( Jasinski et al. 2015 ; Al Balushi and Taleghani 2022 ; Lin et al. 2024 ) , while elastic moduli and sound wave velocities tend to increase significantly ( Johnson and Rasolofosaon 1996 ; Saxena et al. 2017b ; Hao et al. 2022 ) . The different behaviours of rock geophysical properties during non-linear deformation are primarily attributed to the closure of microcracks and grain boundaries under elevated stresses ( Mavko and Nur 1978 ; Saxena et al. 2017a ; Lin et al. 2024 ; Peng et al. 2024 ) . The closure of these pore structures reduces the number of available flow paths, leading to a decrease in permeability. Simultaneously, as rock grains become more compacted, the rock rapidly becomes stiffer. Therefore, investigating non-linear deformation is essential for predicting changes in rock geophysical properties and understanding their implications for specific engineering applications. Some mathematical models have been developed to characterise the non-linear stress-strain relationship under low-stress levels. These include logarithmic models ( Jones 1975 ) , polynomial models ( Gangi 1978 ) , exponential models ( McKee et al. 1988 ; Clarkson et al. 2012 ) , power-law models ( Dong et al. 2010 ) , and stress-sensitive theory models ( Shapiro 2003 ; Shapiro and Kaselow 2005 ; Liu et al. 2009 ; Pervukhina et al. 2008 ) . A systematic evaluation of these models can be found in the work of Zhao et al. 2019 . With the advancement of high-resolution imaging techniques, pore-scale numerical modelling using digital rock images has become a routine process for predicting rock geophysical properties and simulating the complex physical processes within rocks ( Madonna et al. 2012 ; Andrä et al. 2013a ; Andrä et al. 2013b ; Blunt et al. 2013 ; Ikeda et al. 2020 ; Li et al. 2024 ) . This technique reconstructs models based on digital rock images and conducts numerical simulations on these digital models to predict the rock’s geophysical properties. Benefiting from high-resolution imaging techniques, this approach effectively captures intricate rock structures and serves as a non-destructive method for analysing rock properties. It provides a valuable alternative or supplement to conventional laboratory experiments and mathematical models. Some studies have used image-based modelling methods to investigate non-linear rock deformation and estimate stress-dependent rock properties. For instance, Saenger et al. 2016 proposed a workflow to predict the elastic properties of sandstone under varying stresses. They extracted an intermediate phase between pore and solid and assigned varying elastic moduli (0% to 100% of the quartz mineral) to this phase, representing the rock’s elastic moduli under different stresses. Furthermore, Dautriat et al. 2009 introduced a pore-scale compaction law to make the pores and throats stress-dependent within the pore network modelling method. This stress-dependent pore network modelling approach can estimate changes in porosity and permeability under confining stresses. Additionally, Al Balushi and Taleghani 2022 proposed a workflow that integrates the finite element method with the Lattice-Boltzmann method to model stress-dependent porosity and permeability in synthetic digital rock models. Image-based modelling of rock deformation under low-stress levels presents significant challenges due to limitations in image resolution. During the model reconstruction process, a balance must be struck between image resolution and the field of view ( Schlüter et al. 2014 ; Bazaikin et al. 2017 ; Jiang et al. 2024 ) . This trade-off arises from the constraints of imaging instruments and the considerable processing and computational costs associated with subsequent numerical simulations. One major issue caused by this trade-off is the partial-volume effect, which occurs due to coarse image resolution ( Schlüter et al. 2014 ; Gerke et al. 2015 ; Korneev et al. 2018 ; Li et al. 2024 ) . The partial-volume effect means that many image pixels are composed of multiple material phases rather than a single, pristine phase. In conventional digital rock physics workflows, models are typically reconstructed by treating each voxel as if it contains a single material phase. Additionally, microcracks can be significantly smaller than the pixel size, making it difficult for digital rock images to properly capture these features ( Schlüter et al. 2014 ; Andrä et al. 2013a ; Saxena et al. 2017b ) . In fact, numerous studies have reported that the modelled elastic properties of rocks are often significantly overestimated because many microcracks and micropores are not adequately resolved in the reconstructed models ( Madonna et al. 2012 ; Andrä et al. 2013a ; Saxena et al. 2017a ; Farhana Faisal