Quantized Charge Accumulation in a Quantum Anomalous Hall System

Yuanze Li, Jiahao Chen, Renfei Wang, Yifan Zhang, Yingdong Deng, Jin Xie, Xufeng Kou, Yang Liu, Tian Liang · 2025

Read Quantized Charge Accumulation in a Quantum Anomalous Hall System by Yuanze Li, Jiahao Chen, Renfei Wang, Yifan Zhang, Yingdong Deng, Jin Xie, Xufeng Kou, Yang Liu, Tian Liang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-08701.txt.

Introduction

Yuanze Li and 8 co-authors report a direct test of charge buildup in a quantum anomalous Hall system in a 2025 paper. In such a system, Hall conductance takes a fixed exact value from surface states. Past tests checked conductance, not the charge on the surface itself.

A capacitor based method senses charge that grows in step with shifts in the magnetic field. Tests on Corbino and disk devices track loss through conductance and frequency. At very low loss, the full exact charge is seen at last. A model fit gives the charge density the theory predicts. The method may aid the search for a related topological effect.

Catalog record

CREATORYuanze Li, Jiahao Chen, Renfei Wang, Yifan Zhang, Yingdong Deng, Jin Xie, Xufeng Kou, Yang Liu, Tian Liang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-08701

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quantized Charge Accumulation in a Quantum Anomalous Hall System Yuanze Li, Jiahao Chen, Renfei Wang, Yifan Zhang, Yingdong Deng, Jin Xie, Xufeng Kou, Yang Liu, Tian Liang Abstract We report the first experimental observation of magnetic-field-induced quantized charge accumulation in a quantum anomalous Hall (QAH) system—a phenomenon originating from the intrinsic two-dimensional surface state and fundamentally distinct from conventional edge-dependent transport phenomena. Our approach employs a novel out-of-plane capacitive detection method to directly probe this charge accumulation, revealing its distinction and correlation with other surface state properties, such as Laughlin charge pumping. We demonstrate that the accumulated charge density is governed by the quantized Hall conductance but is significantly influenced by dissipation effects due to finite longitudinal conductance. By performing frequency and longitudinal conductance dependence measurements, the underlying ideal quantized charge accumulation is extracted, in agreement with theoretical predictions. Importantly, our out-of-plane method of measuring charge accumulation allows the detection of small electric polarization in future studies, establishing a pathway toward the direct observation of the topological magnetoelectric effect, a manifestation of the four-dimensional quantum Hall effect. 1 Introduction The quantum anomalous Hall (QAH) effect represents a hallmark phenomenon in topological materials, attracting sustained attention since its theoretical prediction and first experimental realization yu2010QAH ; kane2010TI ; SCZhang2011 ; ChangCZ2013_QAH_CBST . The QAH system features a quantized Hall conductance and vanishing longitudinal conductance similar to the quantum Hall (QH) effect. However, the QAH effect requires no external magnetic field, as it arises from the intrinsic magnetization of the material. Magnetically ordered three-dimensional (3D) topological insulators (TIs) serve as the primary material platform for realizing the QAH effect ChangCZ2013_QAH_CBST ; KouXufeng2014_QAH_CBST ; Tokura2014_QAH_CBST ; ZhangYuanbo2020_QAH_MBT , where the top and bottom surfaces of a thin film sample each contribute a half-quantized Hall conductance, \sigma^{\mathrm{s}}_{xy}=\pm e^{2}/2h , with the sign depending on the surface magnetization direction. When combined, both surfaces yield the integer-quantized Hall conductance \sigma_{xy}=\pm e^{2}/h . The half-quantization of the surface state originates from a massive Dirac Hamiltonian, which arises when the exchange interaction from surface ferromagnetism gaps the surface states of 3D TIs qi2008topological ; morimoto2015topological . The analysis based on Berry curvature yields \pm e^{2}/2h for each surface, establishing a topologically nontrivial surface state. The remarkable signatures of the QAH effect—quantized Hall conductance and vanishing longitudinal conductance observed in Hall-bar experiments—are conventionally explained by the presence of a one-dimensional (1D) chiral edge state qi2008topological ; zhang2013chiral . The edge channel forms as a domain wall where the surface Hall conductance changes from +e^{2}/2h to -e^{2}/2h , yielding a chiral edge state at the physical boundary of the sample. However, this model oversimplifies a fundamentally two-dimensional (2D) effect into a boundary phenomenon. The QAH state originates from the quantized Hall conductance of the entire surface, in other words, it is intrinsically a 2D phenomenon. Consequently, although transport measurements in Hall-bar geometries are technically convenient and powerful for confirming quantization, they can only provide an indirect probe of the underlying 2D surface properties as the interpretation of the Hall signal in Hall-bar geometry is unnecessarily convoluted by the edge state. Therefore, developing experimental techniques that can directly access the intrinsic surface Hall conductance, independent of sample edges, is essential for a more complete understanding of the QAH effect. To this end, a few experimental approaches have been developed. One prominent method is the optical Hall measurement based on time-domain terahertz spectroscopy (TDTS), which detects the Faraday and Kerr rotations as signatures of the surface Hall conductance, while avoiding contributions from edge channels by spatially isolating the beam spot from the sample boundary WuLiang2016_3DTI_THz_optical ; Tokura2016_QAH_THz_optical ; Shimano2010_QHE_THz_optical ; Shimano2013_graphene_THz_optical . Another approach, inspired by Laughlin’s charge pumping model laughlin1981 , measures the quantized adiabatic charge transfer between the inner and outer contacts of a Corbino disk sample under field variation 1992_Russia_GaAs_chargepumping&Streda ; RIKEN_CBST_chargepumping , yielding quantized Hall conductance \sigma_{xy} . In the Corbino disk geometry, the charge pumping proceeds entirely through the adiabatic variation of 2D states, eliminating the involvement of edge channels. Different from previous methods, here we propose for the first time a conceptually distinct approach of directly detecting the quantized charge accumulation induced by magnetic field variations on the quantum Hall surface state. This 2D charge accumulation of a sample with area A is given by Q_{\mathrm{a.}}=gA\eta_{0} , where \eta_{0} is the intrinsic and quantized charge value related to the Hall conductance \sigma_{xy} , and g describes the dissipation factor related to the longitudinal conductance \sigma_{xx} . Therefore, detecting charge accumulation differs significantly from detecting \sigma_{xy} alone. While \sigma_{xy} is essentially always quantized when \sigma_{xx} is sufficiently small, the charge accumulation is generally significantly affected by the dissipation factor g(\sigma_{xx}/f) , a function of \sigma_{xx}/f . Even for small \sigma_{xx} that does not affect the detection of the quantized Hall conductance \sigma_{xy} , g(\sigma_{xx}/f) can deviate substantially from 1. In the following paragraphs, we first describe the ideal situation of charge accumulation with no dissipation (i.e., \sigma_{xx} = 0 or g(\sigma_{xx}/f)=1 ) and derive the expression for \eta_{0} . We then return to the general case where g(\sigma_{xx}/f)\neq 1 , providing a systematic analytical model. This general case corresponds to actual experimental conditions when working with real QAH thin film samples. Finally, an analytical expression for g(\sigma_{xx}/f) is deduced, which verifies the quantization of the intrinsic charge accumulation based on experimental data. A clear physical picture of the intrinsic charge accumulation emerges from the Hall response of a QAH system under a time-varying magnetic field. For conceptual clarity, we illustrate this using a simple disk geometry as shown in Fig. 1 a , but it is important to note that the resulting charge accumulation is a general 2D property and thus independent of the sample’s shape. When the time-varying field is applied perpendicular to the sample plane, Faraday’s law dictates that an in-plane circulating electric field is induced on both surfaces. This electric field, in turn, drives a radial Hall current on each surface due to its half-quantized Hall conductance ( \sigma^{\mathrm{s}}_{xy}=\pm e^{2}/2h ). For a single surface, the total outward current is given by: I_{\mathrm{out}}=\sigma^{\mathrm{s}}_{xy}\oint_{\partial S}\mathbf{E}\cdot d\mathbf{l}=-\sigma^{\mathrm{s}}_{xy}\frac{\partial\Phi}{\partial t}, Assuming negligible dissipation, this radial Hall current leads to a net accumulation of surface charge. Since the current flows only during the field’s variation, the resulting charge density is proportional to the change in magnetic field, given by \eta_{0}=\sigma_{xy}\Delta B (1) where \sigma_{xy} is the total Hall conductance of both surfaces combined. This model provides a direct physical link between the accumulated surface charge and the surface Hall conductance, which serves as the key observable in our experiment. Furthermore, in this ideal case without dissipation, detection of charge accumulation \eta_{0}=\sigma_{xy}\Delta B can serve as a highly sensitive probe of \Delta B , i.e., essentially magnetization. This is another way of viewing the conceptual difference between the charge accumulation measurement and the Hall conductance measurement. 2 Experiment 2.1 Experimental principles and setup Figure 1: Principles of charge accumulation, basic transport of 6-QL CBST sample, and measurement configuration. a , Schematic of charge accumulation in a thin-film QAH sample. The top and bottom surfaces each contribute \sigma^{\mathrm{s}}_{xy}=\pm e^{2}/2h due to the magnetically gapped 2D surface state consisting of a massive Dirac cone. A time-varying out-of-plane field B_{\mathrm{AC}} (vertical arrows) induces

Read the complete text