Layer-Dependent Interfacial Coupling and Exciton Pinning in WSe 2 /Graphene Heterostructures

Lan Huang †, Laric Bobzien †, Ángel Labordet Álvarez, Daniel E. Cintron Figueroa, Li-Syuan Lu, Chengye Dong, Michel Calame, Joshua A. Robinson, Bruno Schuler, Mirjana Dimitrievska · 2025

Read Layer-Dependent Interfacial Coupling and Exciton Pinning in WSe 2 /Graphene Heterostructures by Lan Huang †, Laric Bobzien †, Ángel Labordet Álvarez, Daniel E. Cintron Figueroa, Li-Syuan Lu, Chengye Dong, Michel Calame, Joshua A. Robinson, Bruno Schuler, Mirjana Dimitrievska (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-08340.txt.

Introduction

Stacking tungsten diselenide on graphene strains and pins its light emission, report Lan Huang and 9 co-authors in a 2025 materials paper. Interfaces decide whether two-dimensional heterostructures deliver their promised optoelectronic and quantum behaviour. Samples grown directly on graphene are compared, layer by layer from one to five, against flakes exfoliated onto ordinary oxide substrates.

Raman and light-emission spectroscopy with atomic force microscopy reveal the differences. Growth on graphene imposes a persistent compressive strain, shrinks the spacing between the semiconductor's own layers, and concentrates disorder in the layer touching the graphene. Excitons, the bound electron-hole pairs that carry the light response, end up pinned by this interface. Device builders must budget for such coupling rather than treating stacked layers as independent.

Catalog record

CREATORLan Huang †, Laric Bobzien †, Ángel Labordet Álvarez, Daniel E. Cintron Figueroa, Li-Syuan Lu, Chengye Dong, Michel Calame, Joshua A. Robinson, Bruno Schuler, Mirjana Dimitrievska
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE50 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-08340

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Layer-Dependent Interfacial Coupling and Exciton Pinning in WSe 2 /Graphene Heterostructures Lan Huang †, Laric Bobzien †, Ángel Labordet Álvarez, Daniel E. Cintron Figueroa, Li-Syuan Lu, Chengye Dong, Michel Calame, Joshua A. Robinson, Bruno Schuler, Mirjana Dimitrievska Abstract Understanding interfacial interactions in two-dimensional heterostructures is crucial for their implementation in future optoelectronic and quantum technologies. Here, we investigate the interactions between WSe 2 and graphene by comparing metal-organic chemical vapor deposition (MOCVD)-grown WSe 2 films containing 1–5 layers on graphene/SiC with exfoliated WSe 2 on SiO 2 /Si using Raman and photoluminescence spectroscopy combined with atomic force microscopy. We find that growth on graphene induces persistent compressive strain on the order of 0.2% and reduces the interlayer WSe 2 distance by 0.11 ± 0.05 0.11\pm 0.05 Å. The degree of interfacial disorder is strongest in the WSe 2 layer directly contacting graphene, with an effective Urbach energy of ∼ 20 \sim 20 meV, which decreases to ∼ 16 \sim 16 meV upon addition of a second layer and remains similar in subsequent WSe 2 layers. Increasing WSe 2 thickness leads to progressive electron transfer from graphene to WSe 2 , resulting in p p -type doping of graphene and n n -type doping of WSe 2 , with the graphene hole density increasing from approximately 0.4 × 10 13 0.4\times 10^{13} cm -2 for 1L to 0.8 × 10 13 0.8\times 10^{13} cm -2 for 5L. The A- and B-exciton energies of WSe 2 remain nearly pinned on graphene, in contrast to their pronounced thickness-dependent shifts on SiO 2 /Si. We show that this pinning is primarily due to electronic screening and compressive strain, with smaller contributions from charge transfer and modified interlayer coupling. These findings establish graphene as an active interface for controlling excitonic properties in scalable van der Waals heterostructures. Highlight: Graphene acts not merely as a support but as an active interfacial partner, pinning excitonic states in WSe 2 and enabling control over optical properties beyond what is possible on conventional dielectric substrates. I Introduction Two-dimensional (2D) transition metal dichalcogenides (TMDs), such as tungsten diselenide (WSe 2 ), have emerged as promising materials for a wide range of optoelectronic and quantum applications. 16 , 35 , 13 Their strong light–matter interaction results in large exciton binding energies, while spin–orbit coupling gives rise to valley splitting and the layer-dependent band gap becomes direct in the monolayer limit. 62 This makes monolayer WSe 2 an ideal candidate for light-emitting devices, photodetectors, and valleytronic applications. 1 , 54 , 50 As the number of layers increases, WSe 2 retains a high absorption coefficient and develops distinctive interlayer phonon modes, which are relevant for applications in nanoelectronics, sensing, and strain-engineering platforms. 65 , 42 The inherently weak out-of-plane dielectric screening in 2D materials renders their electronic and optical properties exquisitely sensitive to local environmental perturbations and adjacent layers in van der Waals heterostructures. 44 Electrostatic gating offers dynamic control of their properties but requires device fabrication and primarily modifies the carrier density and Fermi level, although band-gap renormalization may also occur at high doping levels. 40 By contrast, tailoring the interface provides a direct route to modify the electronic and optical properties through strain-induced changes in the band gap and phonon spectrum, 2 , 65 interfacial charge transfer, 27 , 26 and environmental screening of the quasiparticle gap and exciton binding energy. 44 , 5 Van der Waals coupling can further modify interlayer phonon behaviour and exciton dynamics. 25 These effects are particularly relevant when 2D semiconductors are integrated with conductive materials such as graphene. Graphene–WSe 2 heterostructures have become model systems for exploring interfacial coupling mechanisms in 2D materials. 34 , 22 Raman and photoluminescence spectroscopy have been used to examine how graphene modifies the vibrational and optical properties of exfoliated WSe 2 . Electrical measurements revealed significant band-edge shifts in graphene–WSe 2 heterostructures, 28 while PL and Raman studies identified emission quenching, ultrafast charge transfer, and strain effects. 46 , 63 The proximity of graphene was also shown to suppress PL and modify spin–orbit interactions depending on the interlayer distance. 64 Scanning tunneling spectroscopy further mapped the thickness-dependent evolution of the band edges in undoped and V-doped WSe 2 on epitaxial graphene, showing how band-gap narrowing and Fermi-level pinning develop through interlayer coupling and doping. 56 However, previous far-field studies are based mainly on exfoliated WSe 2 placed on graphene, or graphene placed on WSe 2 , and focus primarily on how the number of graphene layers affects monolayer or bilayer WSe 2 . Systematic studies varying the number of as-grown WSe 2 layers to determine how the WSe 2 –graphene coupling evolves are still lacking. Moreover, a direct comparison between as-grown WSe 2 on graphene and exfoliated WSe 2 on SiO 2 /Si, the standard substrate for fundamental studies, has not yet been reported. This comparison is particularly relevant because direct growth on graphene/SiC is important for scalable device applications. In this study, we investigate the coupling between WSe 2 and graphene using metal-organic chemical vapor deposition (MOCVD)-grown WSe 2 with thicknesses from 1L to 5L on quasi-freestanding epitaxial graphene/SiC, directly compared with exfoliated WSe 2 on SiO 2 /Si. We evaluate strain, interlayer coupling, and charge transfer by tracking the evolution of the WSe 2 intra- and interlayer phonon modes and the graphene G and 2D modes using Raman spectroscopy. We then examine the layer-dependent emission, exciton-energy shifts, and energetic disorder using photoluminescence (PL) spectroscopy. By combining these measurements, we quantify the thickness-dependent doping, compressive strain, and changes in interlayer distance, and assess their contributions to the excitonic response of WSe 2 . II Results and Discussion II.1 Morphological Characterization of MOCVD-Grown WSe 2 on Graphene/SiC substrate Figure 1: Morphological Characterization of MOCVD-Grown WSe 2 on Graphene/SiC substrate. (a) AFM height profiles extracted along the lines indicated in (b), used to assign WSe 2 thickness from 1L to 5L. (b) AFM image of the WSe 2 flake measured in tapping-mode showing the height profile and confirming the assignment of the different numbers of layers. (c) Representative Raman spectrum of the WSe 2 flake measured on the monolayer area indicated by the red triangle in the inset AFM image and in (d), and using an excitation wavelength of 488 nm. The area around 250 cm -1 is highlighted in the spectrum and its intensity over the flake is shown on the Raman image in (d). We first evaluate the morphological and structural integrity of the MOCVD-grown WSe 2 /graphene heterostructures using atomic force microscopy (AFM), supplemented by Raman spectroscopy. Figure 1 presents an overview of a single WSe 2 island on bilayer graphene on a SiC substrate. Figure 1 a and 1 b show the AFM topography of the as-grown flake, which displays a triangular morphology characteristic of MOCVD-grown WSe 2 . The contrast in the height map reveals discrete terraces, which were assigned to monolayer (1L), bilayer (2L), trilayer (3L), four-layer (4L), and five-layer (5L) regions, as labeled. These assignments are supported by the height profiles shown in Figure 1 a, extracted along the marked directions (lines 1 and 2 in the AFM image). The measured step heights between terraces range from 0.60 to 0.85 nm, consistent

Read the complete text