Atomic diffraction by patterned holes in hexagonal boron nitride: a comparison between semi-classical and quantum computational models.

E. K. Osestad, E. Zossimova, M. Walter, J. Fiedler · 2025

Read Atomic diffraction by patterned holes in hexagonal boron nitride: a comparison between semi-classical and quantum computational models. by E. K. Osestad, E. Zossimova, M. Walter, J. Fiedler (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-08336.txt.

Introduction

Atoms diffracting through sub-nanometre holes in an atom-thin sheet are simulated two ways by Eivind Kristen Osestad and 3 co-authors in a 2025 atomic physics paper. Patterned hexagonal boron nitride membranes could advance atom interferometry and atomic holography. Dispersion forces, especially the Casimir-Polder attraction, pull passing atoms toward the membrane and threaten to close the smallest holes.

Solving the time-dependent Schrödinger equation for helium matter waves gives the quantum benchmark. Transmission rates come out significantly higher in the quantum treatment than semi-classical models suggest, a consequential difference for design. Knowing the true transmission decides feasible hole sizes, and therefore whether membrane-based atom optics can deliver the sensors and holograms promised for it.

Catalog record

CREATORE. K. Osestad, E. Zossimova, M. Walter, J. Fiedler
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-08336

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Atomic diffraction by patterned holes in hexagonal boron nitride: a comparison between semi-classical and quantum computational models. E. K. Osestad, E. Zossimova, M. Walter, J. Fiedler Abstract The diffraction of atoms and molecules through tiny, sub-nanometre holes in atomically thin membranes is a promising approach for advancing atom interferometry sensing and atomic holography. However, dispersion interactions, such as the Casimir-Polder force, pose a significant challenge by attracting diffracting particles to the membrane, limiting the minimum hole size. This paper presents a numerical simulation of helium matter-wave diffraction through sub-nanometre holes in hexagonal boron nitride by solving the time-dependent Schrödinger equation. Our results show that the transmission rates in the quantum approach are significantly higher than those predicted by the commonly used semi-classical approach. This suggests that significantly smaller holes can be used in the design of diffractive masks, provided that fabrication techniques can meet the atomic-level precision to realise such holes. Furthermore, we observe notable differences in diffraction patterns, even for atom velocities that are much greater than the expected convergence threshold between semi-classical and quantum computational models. Diffractive masks with extremely small, sub-nanometre-sized holes offer a way to control atomic wavefronts with high precision. This control enables the creation of high-sensitivity interferometers for more precise measurements of fundamental physical constants, as smaller holes impart a larger momentum transfer, [ 1 , 2 , 3 ] and inertial sensing [ 4 , 5 , 6 ] . Additionally, the ability to manipulate atomic waves with high precision could enable high-resolution atom holography [ 7 , 8 , 9 , 10 ] . However, the minimum size of the hole that can be used for atomic diffraction depends on the strength of the dispersion forces, such as Casimir, Casimir–Polder and van der Waals forces [ 11 , 12 , 13 , 14 , 15 , 16 , 17 ] , arising from the ground-state fluctuations of the electromagnetic field between incident atoms and edge atoms around the hole in the diffraction mask. Attractive dispersion forces can curve the trajectory of incident atoms, reducing the transmission area of the hole [ 18 , 19 , 20 , 21 ] . These forces also shift the phase of atomic waves passing through the hole, which affects the resulting diffraction patterns [ 20 , 22 ] . The strength of dispersion forces depends on multiple factors, including the thickness of the diffraction mask; the atomic number and polarisability of the edge atoms in the mask; the distance between the incident atoms and the edge atoms; as well as the velocity and properties of the incident atoms. Dispersion forces scale with the thickness of the material used for the diffraction mask (i.e. the depth of the hole). Therefore, atomically thin materials can be used to minimise dispersion forces and design diffraction masks with sub-nanometre-sized holes. Monolayer materials, such as graphene or hexagonal boron nitride (hBN), are suitable candidates, due to their chemical stability and mechanical properties [ 23 ] . The incident atoms that are shot into the diffraction mask should be small atoms, such as hydrogen and helium, since their comparatively low number of electrons and internal states makes their dispersion interactions with the atoms in the diffraction mask weaker. In a previous study, we have theorised that it should be possible to diffract helium atoms by sub-nanometre holes in hBN, when the atoms are propagating at normal incidence through the hole at high velocities (on the order of 20 kms -1 , equivalent to 8.3 eV kinetic energy) [ 24 ] . Furthermore, others have shown that it is possible to diffract molecules through holes in graphene [ 25 ] . Recent experiments have further demonstrated that natural pores in the graphene lattice can act as a diffraction grating for hydrogen and helium atomic waves, when the atoms transmit at normal incidence to the lattice plane with velocities greater than 150 kms -1 (or about 466 eV of kinetic energy) [ 26 , 27 ] . For lower velocities, the repulsive forces between atoms at close range lead to scattering in the other direction [ 28 , 29 , 30 , 31 ] . From a computational perspective, there are different methods to calculate the propagation of atomic waves through patterned holes or slits in materials, including the resulting diffraction patterns and phase shifts [ 27 , 25 , 20 , 32 ] . The incident matter waves can be described using either semi-classical or quantum mechanics, whilst the electronic properties of the interacting atoms are described using electronic structure theory. A semi-classical approximation holds when the change in de Broglie wavelength over distance is much less than 1 [ 33 ] . As there are sharp spikes in the potentials resulting from dispersion interaction, it is difficult to say exactly when they hold. Close to these thresholds, the two descriptions can yield different results [ 34 ] . In this paper, we first use electronic structure theory to calculate the dispersion forces between incident helium atoms and atoms in the hBN monolayer. Then, we introduce a numerical method to solve the propagation of the transverse part of the wavefunction as it passes through different holes in hBN. We compare the results with our previous semi-classical calculations [ 24 ] and find that there are notable differences, especially at lower velocities, where the de-Broglie wavelength of the matter wave is comparable to the size of the hole. We limit ourselves to modelling coherent diffraction. Effects, such as phonon excitation in the monolayer, are ignored [ 35 , 27 ] . One key difference is that, within the quantum description, the atoms can pass through smaller holes at lower velocities than previously thought possible. 1 Computational approach Our computational approach involves simulating the propagation of a helium matter wave through a hole in a hBN monolayer. The simulation setup, illustrated in Fig. 1 , consists of four conceptual layers. Layer 1 represents the initial homogeneous wave function on a plane parallel to the hBN monolayer. As the matter wave propagates downward through the hBN plane in Layer 2, we capture snapshots of the wave function at each time step. The hBN monolayer is modelled using a 12x12 supercell of the hBN primitive cell, with a lattice constant a_{\rm l}= 2.504\,\rm{\r{A}} [ 36 , 37 ] . We create hBN supercells with 3 different hole geometries, as depicted in Fig. 2 , with the help of the atomic simulation environment [ 38 ] . These include circular holes with diameters of 6 Å (a) and 10 Å (b), as well as a snowflake-shaped hole (c). Each of these hBN supercells is considered individually in Layer 2, allowing us to study the impact of hole geometry on the matter wave propagation. As the matter wave interacts with the hBN monolayer, a significant portion of the wave front is scattered, with most particles being back-scattered, while allowing some to transmit through the monolayer. The transmitted part of the wavefront in Layer 3 evolves freely, eventually forming an interference pattern, as shown in Layer 4. Note that the labelling of layers is a conceptual framework for understanding the simulation, rather than the time-step resolution of the numerical simulation.

Read the complete text