Deploying Robust Decision Support Systems for Transit Headway Control: Rider Impacts, Human Factors and Recommendations for Scalability

Joseph Rodriguez, Haris N. Koutsopoulos, Jinhua Zhao · 2025

Read Deploying Robust Decision Support Systems for Transit Headway Control: Rider Impacts, Human Factors and Recommendations for Scalability by Joseph Rodriguez, Haris N. Koutsopoulos, Jinhua Zhao (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-08231.txt.

Introduction

In Chicago, a learning-based decision support system kept buses evenly spaced during 2022 and 2023 pilots described by Joseph Rodriguez and 2 co-authors in a 2025 transport paper. Headway control holds buses briefly so gaps stay regular, fighting the bunching that ruins reliability. Reinforcement learning chose the holding actions, and supervisors used an interface to monitor service and record what was applied.

One pilot held buses at the terminal on a route hurt by absenteeism and missed trips, and reliability improved beyond what extra service days achieved. A second pilot applied control en route. Rider impacts, human factors, and scalability recommendations round out the report, since a system supervisors distrust will not survive deployment.

Catalog record

CREATORJoseph Rodriguez, Haris N. Koutsopoulos, Jinhua Zhao
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE59 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-08231

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Deploying Robust Decision Support Systems for Transit Headway Control: Rider Impacts, Human Factors and Recommendations for Scalability Joseph Rodriguez, Haris N. Koutsopoulos, Jinhua Zhao Abstract Service reliability is critical to transit service delivery. This paper describes headway control pilots conducted in two high-ridership Chicago bus routes between 2022 and 2023. A decision support system was developed for a bus holding strategy based on a reinforcement learning approach. For the pilots, a user interface enabled supervisors to monitor service and record applied actions. The first pilot tested terminal-based holding on a route affected by missed trips from absenteeism. The analysis found improvements in reliability, and the application of control was shown to outperform days with more service. The second pilot applied en-route holding in a high-ridership bus route in Chicago. The evaluation showed wait time improvements with rippled benefits to stops downstream, and a reduction in transfer times from connecting bus and rail lines. Compliance analysis based on the supervisor logs on the app revealed mixed compliance levels from drivers, which were related to the mentality of schedule adherence and seniority. Recommendations are provided for practitioners to scale similar efforts. keywords Service Reliability, Bus Control, Decision Support Tools, Human-in-the-loop 1 Introduction Service reliability is critical to transit service delivery. Riders of high-frequency services typically arrive at a stop without checking the schedule and expect the bus to arrive. Even for operations with a well-optimized schedule, mixed-traffic operations, uncertain rider demand and other challenges on the field force plans to change. Thus, operations control serves as a complementary practice to deal with deviations from the plan. Typically, operations staff at agencies are tasked with applying proactive and corrective control actions to maintain service regularity. Historically, these tasks are divided among central controllers and field supervisors stationed at terminals or mid-route points. However, these decision-makers can have varying levels of expertise and access to information. Human decision-making in the field is shaped by these factors—meaning that two supervisors in similar circumstances can produce very different outcomes. Data-driven decision support systems can help make the information available and the criteria for decisions more consistent across operational actors. Real-time operations control has been the subject of much theoretical and experimental work. At the theoretical level, methods for control strategies range from heuristics to advanced optimization and machine learning methods Tirachini et al. 2021 . Despite the abundance of theoretical models for real-time control and advanced technologies, these have not been broadly adopted in real operations at transit agencies. Control decisions at transit agencies remain largely ad-hoc, manual, and under-digitized. Only the transportation authorities of Stockholm, Sweden Cats 2014 , and Santiago, Chile Lizana et al. 2014 have reported reliance on real-time tools for headway-based control. In real-world pilots, the methods have been limited to heuristics and rolling-horizon optimization, with the computational load limiting the practicality for deployments. These methods, which rely on assumptions and rules as opposed to data-driven training, are limited in their ability to generalize to real-world conditions and constraints, such as driver non-compliance. Human factors play a significant role in the effectiveness of holding strategies, as evidenced in simulation studies Phillips et al. 2015 and driver surveys Martínez-Estupiñan et al. 2022 ; Chen et al. 2024 . Such issues are seldom accounted for in the development and evaluation of proposed methods, but can impact the effectiveness of deployments. However, the literature has seldom considered driver behavior explicitly in the deployed algorithms. Argote-Cabanero et al. 2015 constrained the variability of holding instructions displayed to drivers to avoid driver stress and improve compliance, thus embedding human factors into the control design. The method, however, does not fully capture the intrinsic motivations of drivers not to comply, such as the culture of adhering to schedules. To address this, we deploy a data-driven reinforcement learning (RL) method for terminal and en-route holding in two pilots, with human factors embedded in the methodology. The models are pre-trained in simulated operational conditions that are based on empirical data sources. For robust deployments, guardrails are built around the model’s recommended holding actions to enforce service plan constraints, such as limits on lateness and excessive holding times. Also, an even-headway strategy similar to classical methods is formulated and used as an additional source of holding recommendations, as an alternative in case the RL model fails or produces suboptimal recommendations. This recommendations engine is integrated into a decision support system for transit supervisors and controllers. The decision support system bridges existing information gaps between stakeholders of real-time service decisions. These stakeholders, such as field supervisors, the control center and garage staff, typically have different information access and needs without an integrated information infrastructure, resulting in an over-reliance on verbal communication. The decision support system combines automated information pipelines from various sources with manual service update features to allow the latest information to be visible to stakeholders. The human factors are embedded in the methodology in various ways. First, the RL model training includes simulated scenarios with driver non-compliance. Second, the decision support system allows supervisors to report holding instructions, which allow the tracking of non-compliance. Lastly, the analysis advances the understanding of the relationship between non-compliance, schedule adherence, and experience levels. To summarize, the main contributions of this paper are: • To the authors’ best knowledge, this study represents the first application of a reinforcement learning model in a live deployment of bus operations control. • The paper embeds human factors in the methodology, with the models trained on non-compliant drivers and tracking of compliance. It also quantifies the compliance levels and explores the relationship with driver attributes. • This paper presents a comprehensive impact assessment with metrics relevant to riders, bus drivers, and transit agency stakeholders. It includes comprehensive performance metrics, including impact on transfer times at key interchanges and effectiveness relative to adding more service. The remainder of this paper is structured as follows. First, an overview of the related work is provided, followed by a description of the methodology and the decision support system. Afterwards, the implementation and performance impacts from two pilots are discussed. Next, recommendations for scalability are provided, as well as conclusions. 2 Related Work 2.1 Previous deployments Academic collaborations with transit agencies have yielded numerous pilots and long-term implementations of headway control. The papers on previous deployments are synthesized along a set of dimensions in Table 1 . The deployments go back decades and have mostly been based in major US cities, with some in Europe and one in Chile. Most applications are on bus systems, with few on rail, potentially due to the flexibility and lower ridership volume of bus services. Pilots typically apply a single strategy, most commonly holding, with one study applying short-turning Strathman et al. 2001 and several studies applying speed controls Cats 2014 ; Lizana et al. 2014 ; Argote-Cabanero et al. 2015 . In several implementations, the control actions were decided by a manual process, without reliance on an automated decision support system (DSS). However, recent work has produced advanced DSS with user interfaces. The dominant form of communication with the driver happens in person and by radio. In contrast, experiments in Stockholm Cats 2014 , Santiago Lizana et al. 2014 , Atlanta Berrebi et al. 2018a ,

Read the complete text