A second-order volumetric boundary treatment for the lattice Boltzmann method

Kaj Hoefnagel, Damiano Casalino, Steven Hulshoff, Frits de Prenter · 2025

Read A second-order volumetric boundary treatment for the lattice Boltzmann method by Kaj Hoefnagel, Damiano Casalino, Steven Hulshoff, Frits de Prenter (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-05035.txt.

Introduction

Boundary treatment can limit the accuracy of lattice Boltzmann flow simulations. Kaj Hoefnagel, lead author with three co-authors, introduce a volumetric boundary method in a 2025 fluid dynamics paper. Particle populations are projected onto a discontinuous piecewise linear basis. They are streamed using an exact geometric mapping, for two-dimensional convex, stationary shapes.

Stability is checked with a new analysis tool based on eigenvalues of the streaming step. The method reaches a convergence rate of at least two, improving on precursor methods. For flow around a two-dimensional airfoil, it gives better lift and drag results in their tests.

Catalog record

CREATORKaj Hoefnagel, Damiano Casalino, Steven Hulshoff, Frits de Prenter
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE60 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-05035

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A second-order volumetric boundary treatment for the lattice Boltzmann method Preprint: APS/123-QED Kaj Hoefnagel, Damiano Casalino, Steven Hulshoff, Frits de Prenter Abstract A new volumetric-type boundary treatment is introduced for the lattice Boltzmann method. Populations are projected onto a discontinuous piecewise linear basis and streamed using an exact geometrical mapping. The method is implemented in 2D for convex, stationary geometries. Stability is verified through a novel analysis tool based on the eigenvalues of the streaming operation. A convergence rate of ≥ 2 \geq 2 is achieved, indicating improved accuracy over precursor methods. For flow around a 2D airfoil, the method yields better lift and drag predictions. I Introduction Historically, engineering problems governed by the Navier-Stokes equations have been simulated by discretizing these in space and time directly. The lattice Boltzmann method (LBM) has recently gained popularity as an alternative. It can be shown with a perturbation analysis that the weakly compressible Navier-Stokes equations emerge from the lattice Boltzmann equation if the continuum assumption holds ( Krüger et al. 2017 , Sec. 4.5.5) . The LBM offers several advantages: a local and explicit algorithm that gives superior parallel scaling Schornbaum and Rüde 2016 , low numerical dissipation Suss et al. 2023 , and relatively straightforward treatment of complex geometries Barad et al. 2017 . On the other hand, the LBM also has disadvantages due to its reliance on an equidistant Cartesian lattice. These include its inability to use anisotropic refinement to decrease the cost of resolving boundary layers and its need for complex algorithms to treat cells cut arbitrarily by boundaries. Proper enforcement of boundary conditions in cut cells remains problematic. In general, the following five characteristics are desirable for an LBM boundary treatment: 1) At least second-order convergence of the error, ensuring compatibility with the typically second order accuracy of the bulk ( Krüger et al. 2017 , p. 160) Sterling and Chen 1996 . 2) Exact conservation of mass and momentum, essential for “fully self-consistent and stable microdynamics” Chen 1998 . 3) Stability (implies that modes are never amplified by the boundary treatment). 4) Smooth surface forces (which is an issue for Cartesian mesh methods in general de Prenter et al. 2018 ). 5) Computational cost, which should not exceed that of the bulk. Three main categories of boundary treatments in the LBM exist: I) Broken-link-type schemes , where missing populations on lattice links intersected by the boundary are found through inter-/extrapolation Bouzidi et al. 2001 ; Filippova and Hänel 1998 ; Mei et al. 1999 ; Zhao-Li et al. 2002 ; Chun and Ladd 2007 . These can be second-order schemes Mei et al. 1999 , but they are not necessarily conservative ( Marson 2022 , p. 45) . Their stability can also be an issue, especially with high-order schemes at high Reynolds numbers Mei et al. 1999 ; De Rosis et al. 2014 . These schemes typically do not lead to smooth surface forces due to discrete sampling of the boundary Chen 2012 , but their computational cost is typically low Nash et al. 2014 . II) Schemes based on the immersed boundary method (IBM) , which impose the desired boundary condition through a force applied to nearby nodes Feng and Michaelides 2004 . These schemes require interpolation, which can blur the boundary, leading to an incorrect apparent boundary location Breugem 2012 . Furthermore, these schemes are generally only first-order accurate, and are usually not exactly conservative ( Krüger et al. 2017 , p. 473) . However, they are normally stable Peng et al. 2019 . Their surface forces are also not smooth Wu and Shu 2009 , but their computational cost is typically low Feng and Michaelides 2004 . III) Volumetric-type schemes are based on a finite-volume-like approach. These geometrically compute the volume fraction of populations in a cell that will collide with a boundary segment. Incoming populations are collected for each boundary segment in the gather operation. These are then reversed and distributed back to the cells in the scatter operation. In the original scheme Chen et al. 1998 , populations were assumed to be equally distributed throughout the cell, which led to first-order accuracy Li 2012 . To address this, Li et al. later introduced a scattering correction Li et al. 2004 ; Li et al. 2009 . Li observes an overall order of convergence close to two, with the exception of boundary cells with small fluid fractions, where the order is close to one Li 2012 . Next, since the full geometry is sampled, mass and momentum are exactly conserved. The method has good numerical stability ( Li 2012 , p. 10) . Surface forces are more naturally computed due to the boundary-based approach Chen et al. 1998 . However, oscillations still occur even with corrections Casalino et al. 2022 . Finally, the computational cost of this scheme has not been substantially addressed in the literature. In this work, a new boundary treatment is introduced that is designed to satisfy all the aforementioned desired properties. We use an approach similar to volumetric-type schemes, but aim to achieve second-order accuracy by replacing the gather/scatter operation with an exact geometric mapping of populations reflecting off the boundary, and by representing populations with discontinuous piecewise polynomials within each cell. We refer to this treatment as the Continuum Field Formulation (CFF), emphasizing its use of spatial fields to represent the advection dynamics near the boundary. We describe the performance of the CFF in terms of accuracy, stability, conservation, smoothness of surface forces, and computational cost. First, an implementation of CFF in 2D is described in Sec. II . Its stability is then analyzed using a novel approach based on the eigenvalues of the global streaming operation, described in Sec. III . Next, the order of convergence is examined for a 1D and a 2D channel in Sec. IV . Furthermore, results for a 2D airfoil are used to investigate the smoothness of surface forces. Finally, a first estimation of computational cost is provided in Sec. V . II Methodology II.1 Fundamental LBM equations Rather than velocity and pressure, the LBM models the evolution of the particle distribution function f_{i}(\mathbf{x},t) , which represents the density of particles moving with discrete velocity \mathbf{c}_{i} at position \mathbf{x} at time t . This function is hereafter referred to as the populations. In this work, the D2Q9 velocity model is used with i\in\left\{0,1,...,8\right\} and \mathbf{c}_{i}=\begin{cases}(0,0)&i=0,\\ (\pm 1,0),(0,\pm 1)&i=1,2,3,4,\\ (\pm 1,\pm 1)&i=5,6,7,8,\end{cases} (1) where we nondimensionalize using lattice units, setting \Delta x=1 ; \Delta t=1 . The evolution equation of the LBM is given by: f_{i}(\mathbf{x}+\mathbf{c}_{i}\Delta t,t+\Delta t)=f_{i}(\mathbf{x},t)+\Omega_{i}(\mathbf{x},t), (2) where \Omega_{i} is the collision operator. In this work, the BGK approximation is used for \Omega_{i} Bhatnagar et al. 1954 : \Omega_{i}=-\frac{1}{\tau}\left(f_{i}-f_{i}^{\text{eq}}\right), (3) where \tau is the nondimensional relaxation time and f_{i}^{\text{eq}} is the discrete equilibrium distribution Krüger et al. 2017 : f_{i}^{\text{eq}}=w_{i}\rho\left[1+\frac{\mathbf{c}_{i}\cdot\mathbf{u}}{c_{s}^{2}}+\frac{(\mathbf{c}_{i}\cdot\mathbf{u})^{2}}{2c_{s}^{4}}-\frac{\mathbf{u}\cdot\mathbf{u}}{2c_{s}^{2}}\right]. (4) Here, c_{s}=1/\sqrt{3} is the nondimensional speed of sound and w_{i} are the weights which are w_{0}=4/9 , w_{1-4}=1/9 and w_{5-9}=1/36 for the D2Q9 model. Furthermore, \rho and \mathbf{u} are the nondimensional macroscopic fluid density and velocity, respectively. They can be found as moments of f_{i} : \rho=\sum_{i}f_{i},\qquad\rho\mathbf{u}=\sum_{i}f_{i}\mathbf{c}_{i}. (5) Note that for some cases, we impose a gravity force \mathbf{g} ,

Read the complete text