Turbulence inference from CO spectral observations 2026 Turbulence inference from CO spectral observations – F

Jayashree Narayan, Aris Tritsis, Christoph Federrath · 2025

Read Turbulence inference from CO spectral observations 2026 Turbulence inference from CO spectral observations – F by Jayashree Narayan, Aris Tritsis, Christoph Federrath (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-04818.txt.

Introduction

Turbulence inside molecular clouds helps regulate how stars form, but observers must infer it from spectral data. Jayashree Narayan, lead author with two co-authors, test how carbon monoxide lines affect that inference in a 2025 paper. Earlier methods got three-dimensional velocity spread from observations while assuming the gas was optically thin.

The authors post-process a chemo-dynamical cloud run with a radiative transfer code. That builds spectral cubes for two carbon monoxide lines. Smoothing isolates turbulence in the resulting maps. They find the measured velocity spread needs a correction factor. They also measure how opacity and chemistry shift the result.

Catalog record

CREATORJayashree Narayan, Aris Tritsis, Christoph Federrath
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE52 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-04818

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Turbulence inference from CO spectral observations 2026 Turbulence inference from CO spectral observations – F Jayashree Narayan, Aris Tritsis, Christoph Federrath Abstract Turbulence influences the structure and dynamics of molecular clouds, and plays a key role in regulating star formation. We therefore need methods to accurately infer turbulence properties of molecular clouds from position-position-velocity (PPV) spectral observations. A previous method calibrated with simulation data exists to recover the 3D turbulent velocity dispersion from PPV data. However, that method relies on “optically-thin conditions”, ignoring any radiative transfer (RT) and chemical effects. In the present study we determine how opacity, RT, and chemical effects influence turbulence measurements with CO lines. We post-process a chemo-dynamical simulation of a turbulent collapsing cloud with a non-local thermodynamic equilibrium line RT code to generate PPV spectral cubes of the CO ⁡ ( 1 − 0 ) \mathrm{CO~(1-0)} and CO ⁡ ( 2 − 1 ) \mathrm{CO~(2-1)} lines, and obtain moment maps. We isolate the turbulence in the first-moment maps by using a Gaussian smoothing approach. We compare the CO results with the optically-thin scenario to explore how line excitation and RT impact the turbulence measurements. We find that the turbulent velocity dispersion ( σ v \sigma_{v} ) measured via CO requires a correction by a factor ℛ CO \mathcal{R}_{\mathrm{CO}} , with ℛ CO , − 0 = 0.88 − 0.08 + 0.09 \mathcal{R}_{\mathrm{CO,1\!-\!0}}=0.88^{+0.09}_{-0.08} for the CO ⁡ ( 1 − 0 ) \mathrm{CO~(1-0)} line and ℛ CO , − 1 = 0.88 − 0.08 + 0.10 \mathcal{R}_{\mathrm{CO,2\!-\!1}}=0.88^{+0.10}_{-0.08} for the CO ⁡ ( 2 − 1 ) \mathrm{CO~(2-1)} line. As a consequence, previous measurements of the σ v \sigma_{v} were overestimated by ∼ 10 − 15 % \sim 10-15\% on average, with potential overestimates as high as 40 % 40\% , taking the 1-sigma uncertainty into account. 1 Introduction Turbulence plays a crucial role in the evolution of molecular clouds and the star formation process, acting as a key mechanism that regulates the dynamics and structure of star-forming regions ( Mac Low & Klessen 2004 ; McKee & Ostriker 2007 ; Padoan et al. 2014 ) . In the absence of turbulence, molecular clouds would rapidly collapse under their own gravity, leading to an unrealistically high star formation rate and efficiency. Turbulence slows down star formation ( Federrath 2015 ) , while simultaneously generating localised density enhancements that promote fragmentation and star formation ( Mac Low & Klessen 2004 ) . The nature of turbulence is thought to set the initial mass function of stars ( Padoan & Nordlund 2002 ; Hennebelle & Chabrier 2008 ; Hopkins 2012 ; Nam et al. 2021 ; Mathew et al. 2023 ) , and the star formation rate ( Krumholz & McKee 2005 ; Padoan & Nordlund 2011 ; Hennebelle & Chabrier 2011 ; Federrath & Klessen 2012 ) . Considering the importance of turbulence in the interstellar medium, we require reliable techniques to measure the physical properties of the turbulence. One such key property is the turbulent Mach number, which in turn is governed by the three-dimensional (3D) turbulent velocity dispersion, denoted as \sigma_{v,\mathrm{3D}} . An observational key challenge is that we can only measure the line-of-sight (LOS) velocity component through Doppler shifts of spectral lines, while the two transverse velocity components remain inaccessible ( Ostriker et al. 2001 ) , requiring sophisticated methods to estimate and recover the full 3D turbulent velocity distribution of interstellar clouds. Stewart & Federrath 2022a developed a method to reconstruct the intrinsic 3D turbulent velocity distribution from LOS velocity measurements molecular clouds. Their method was calibrated and tested with simulations of rotating, turbulent, collapsing molecular clouds, providing good estimates of \sigma_{v,\mathrm{3D}} from position-position-velocity (PPV) data. However, the method by Stewart & Federrath 2022a assumes that the gas is optically thin. By contrast, PPV observations in molecular clouds rely on molecular lines that are often not optically thin, such as the {}^{12}\mathrm{CO~(1-0)} rotational line. Radiative transfer (RT) and excitation effects can have a significant impact on these lines, the inferred moment maps, and ultimately on the estimates of the intrinsic \sigma_{v,\mathrm{3D}} . In such cases, radiation is absorbed and scattered before it can reach the observer, potentially masking the cloud’s internal structure ( Larson 1981 ) . This affects the measurement of velocity dispersion and inferred turbulence, as molecular emission lines may become saturated or altered in dense regions, leading to incomplete or skewed data ( Baker 1976 ) . RT modelling is thus crucial in order to understand systematic biases in measurements of the velocity dispersion, and the overall dynamics of molecular clouds. Here, we propose a method to correct for the effects of finite optical depth, line excitation, and RT, in order to recover the intrinsic \sigma_{v,\mathrm{3D}} from CO line observations. In Sec. 2 we summarise our methods and the numerical tools to perform the chemo-dynamical simulation and the RT calculations. In Sec. 3 we present our method to isolate turbulence in first-moment maps, and our results on the effect of RT and chemistry in measurements of the turbulent velocity dispersion. Additionally, we perform a power spectrum analysis, and investigate the robustness of our results as the cloud dynamically evolves. Sec. 4 provides a discussion of the impact of CO excitation and RT on the \sigma_{v,\mathrm{3D}} inference and introduces a correction factor ( \mathcal{R}_{\mathrm{CO}} ) to account for the effects of CO excitation and RT. Sec. 5 summarises the main findings of this work. 2 Methods 2.1 Hydrodynamical simulations We use the isothermal MHD simulation of a turbulent collapsing molecular cloud described in Tritsis et al. 2025a . Here, we give a brief overview of the simulation and refer the interested reader to the aforementioned study for more details. The simulation is performed with the adaptive mesh refinement code FLASH ( Fryxell et al. 2000 ; Dubey et al. 2008 ) using open boundary conditions, a base resolution of 64^{3} grid points and two levels of refinement. The physical size of the simulated cloud is L=2\,\mathrm{pc} in each direction, the initial density is 500~\rm{cm^{-3}} , the initial strength of the magnetic field is 7.5\,\mu\mathrm{G} , and the temperature is equal to 10 K. Consequently, the cloud is supercritical and its total mass is \sim 240\,\rm{M_{\odot}} . We add turbulent initial conditions using the publicly-available code TurbGen ( Federrath et al. 2010 ; Federrath et al. 2022 ) . The velocity field is generated in Fourier space (in the range 2\leq k\leq 20 where k=2\pi/L ), following a power-law dependence of dv^{2}/dk\propto k^{-2} . The velocity field has a standard deviation of \sigma_{v}=0.554\,\mathrm{km/s} , which, given our sound speed of c_{\mathrm{s}}=0.18\,\mathrm{km/s} , corresponds to a turbulent sonic Mach number of \mathcal{M}\approx 3 . Alongside solving the equations of Ideal MHD, we incorporate a non-equilibrium gas-grain chemical network to model the formation and destruction of 115 chemical species. The inputs to our chemical model for every timestep and grid point are the temperature, \rm{H_{2}} number density, 3D visual extinction and the cosmic-ray ionization rate with the source/sink terms calculated after the advection terms. The visual extinction in each grid cell was estimated “on the fly” using the six-ray approximation, and the column density of the gas, following Glover & Clark 2012 . To convert

Read the complete text