Coupling of a nuclear transition to a Surface Acoustic Wave

Albert Nazeeri, Chiara Brandenstein, Chengjie Jia, Lorenzo Magrini, Giorgio Gratta · 2025

Read Coupling of a nuclear transition to a Surface Acoustic Wave by Albert Nazeeri, Chiara Brandenstein, Chengjie Jia, Lorenzo Magrini, Giorgio Gratta (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-02750.txt.

Introduction

Albert Nazeeri and four co-authors present a 2025 experimental physics paper coupling a nuclear transition to a surface acoustic wave, a ripple travelling along a solid's surface. Wiggling a nucleus mechanically lets researchers steer its gamma-ray emission and absorption.

A film enriched in iron-57 sits on the acoustic device, driven near ninety-eight megahertz, almost a hundred times the nuclear linewidth. The drive prints a comb of sidebands onto the Mössbauer absorption spectrum, the fingerprint of periodic modulation. The authors describe the result as the highest frequency yet for a mechanically driven Mössbauer resonance. The solid, single-piece platform opens an interface linking nuclear transitions with high-frequency acoustics, with uses in gamma-ray quantum optics and precision nuclear spectroscopy.

Catalog record

CREATORAlbert Nazeeri, Chiara Brandenstein, Chengjie Jia, Lorenzo Magrini, Giorgio Gratta
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE44 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-02750

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Coupling of a nuclear transition to a Surface Acoustic Wave Albert Nazeeri, Chiara Brandenstein, Chengjie Jia, Lorenzo Magrini, Giorgio Gratta Abstract Mechanical modulation of recoilless nuclear transitions allows the dynamic control of γ \gamma -ray emission and absorption. Accessing modulation frequencies well above the nuclear linewidth enables coherent manipulation of the nuclear response. Here we demonstrate such control by coupling a film of enriched 57 Fe to a 97.9 ​ MHz 97.9\penalty\ \mathrm{MHz} surface acoustic wave, which is nearly two orders of magnitude faster than the nuclear linewidth. The mechanical drive produces a comb of absorption sidebands in the Mössbauer spectrum, consistent with coherent phase modulation of the nuclear transition. This constitutes the fastest phonon-driven control of Mössbauer resonances to date. Our solid-state, monolithic platform establishes a new interface between nuclear transitions and high-frequency acoustics, with applications in γ \gamma -ray quantum optics and precision nuclear spectroscopy. Introduction When low-energy nuclear \gamma transitions occur in certain solids, the recoil can be coherently absorbed by the entire lattice. This results in a recoil-free transition that is characterized by extremely narrow spectral lines and is known as the Mössbauer effect 1 . Discovered in 1958, the Mössbauer effect was soon employed in a landmark experiment to measure the gravitational redshift, one of the predictions of general relativity 2 . Today, Mössbauer spectroscopy is a useful tool in chemistry and materials science; shifts of the extremely narrow resonances are sensitive local probes to the electric, magnetic, and structural environments of Mössbauer active atoms. 3 . Beyond precision spectroscopy, the Mössbauer effect is a fundamental tool in nuclear and x-ray quantum optics 4 ; 5 ; 6 ; 7 . Coherent control of a nuclear ensemble, achieved through external magnetic fields 8 or mechanical modulation 9 ; 10 ; 11 , has enabled demonstrations such as waveform shaping of recoilless \gamma -ray photons 12 and spectral narrowing of synchrotron pulses 13 . Here, we demonstrate the coupling of enriched {}^{57}\mathrm{Fe} nuclei to a traveling surface acoustic wave (SAW) at 97.9\penalty\ \mathrm{MHz} in a monolithic device. This approach offers two fundamental advantages. First, it enables coherent modulation of nuclear resonances at much higher frequencies than previously achieved with vibrating piezo actuators 10 ; 12 ; 13 ; 11 , thereby extending the accessible modulation bandwidth. Second, SAW devices are a mature platform in the quantum regime 14 ; 15 ; 16 , combining high coherence, design flexibility, and compatibility with solid-state quantum systems 17 ; 18 ; 19 . Extending this control to Mössbauer nuclei opens a promising route toward phonon-based quantum control of nuclear states 20 , establishing a new interface between nuclear quantum optics and surface phononics. We observe coherent modulation of the nuclear energy levels, with sideband intensities following a characteristic Bessel-function dependence on the modulation strength. To our knowledge, this represents the fastest phonon-driven modulation of Mössbauer resonances reported to date, and the first realized in a monolithic device—opening a pathway toward fast and scalable nuclear control using synchrotron light. Experiment To enable fast mechanical modulation of nuclear resonances, an {}^{57}\mathrm{Fe} film is deposited on a ST-Cut quartz substrate, and the film is driven by a 97.9\penalty\ \mathrm{MHz} surface acoustic wave. This modulated Mössbauer absorber is placed in a conventional transmission spectrometer 21 (Figure 1 a). The Mössbauer absorber is fabricated by thermally evaporating iron enriched to 96% in the isotope {}^{57}\mathrm{Fe} , forming a 200\penalty\ \mathrm{nm} -thick film. The deposition is obtained in a dedicated setup at a pressure of 9.5\cdot 10^{-10}\penalty\ \mathrm{Torr} and a deposition rate of 6.1\penalty\ \mathrm{nm/h} . With no SAW excitation, the absorption spectrum is dominated by hyperfine Zeeman interactions in the {}^{57}\mathrm{Fe} film which splits the nuclear ground (excited) state into 2 (4) hyperfine states of angular momentum m_{j}=\pm 1/2 ( m_{j}=\pm 1/2,\pm 3/2 ). The selection rule \Delta m_{j}=0,\pm 1 then leads to 6 different allowed transitions 3 , spaced by 101 neV (corresponding to 24.4\penalty\ \mathrm{MHz} , or a Doppler velocity of 2.1\penalty\ \mathrm{mm/s} ), schematically shown in the bottom panel of Figure 1 b. The data shown in this letter, was taken on a device where over etching in the final step resulted into a reduction of the total amount of iron, so that the effective thickness was approximately 90 nm over a region of 4.0\times 0.9\penalty\ \mathrm{mm}^{2} (thickness estimated by the contrast of the peaks in the absorption spectrum) 22 . SAWs are excited in the quartz wafer by two sets of interdigitated transducers (IDTs or “couplers”) deposited at opposite ends of the chip, with a pattern of double lines, spaced by a \lambda_{\mathrm{saw}}=32\penalty\ \mathrm{\mu m} pitch, illustrated in Figure 2 . The pattern is designed to resonantly couple, by piezoelectric effect, \Omega_{\mathrm{saw}}=2\pi\cdot 97.9\penalty\ \mathrm{MHz} SAWs propagating across the chip. The two opposite couplers allow for testing the coupling from electric signals, to acoustics, and back to electric signals. To avoid reflections off the edge of the substrate, the edges of the quartz chip are “terminated” by small pieces of kapton tape. A fraction, \alpha , of the SAW is still coherently reflected by the impedance mismatch from the readout coupler. This reflection gives rise to a partial standing wave across the quartz chip. The resulting modulation of the SAW amplitude is included in the spectral analysis. Figure 1: a) Schematic view of the experiment. The 57 Fe absorber device is shown in the middle, omitting the collimator and the acoustic “terminators”, for clarity. b) Nuclear level scheme including hyperfine structure and the additional lines added by the SAW drive. c) cartoon of the expected spectrum with the SAW drive. A 1 GBq 57 Co source was used for the experiment, where the 57 Co is embedded in a rhodium matrix, resulting in a single emission line of E_{\gamma}\simeq 14.4 keV, an isomer shift with respect to \alpha -Fe of -5\penalty\ \mathrm{neV} and a linewidth of 7 neV ( 1.7\penalty\ \mathrm{MHz} ), slightly broader than the natural linewidth of the nuclear state. The absorption spectrum of the {}^{57}\mathrm{Fe} film is scanned by varying the Doppler shift between the source and absorber. The highest contrast of the absorption resonances is about 3\% , so that the count rate is dominated by non-resonant \gamma s ( 14.4\penalty\ \mathrm{keV} and Compton scattering of 122\penalty\ \mathrm{keV} ). A tungsten collimator is used to increase the contrast of the resonances, resulting in a count rate of approximately 2 kHz, consistent with the internal conversion coefficient and solid angle defined by the collimator 22 . For each spectrum collected, about 10 days of data are required to sufficiently suppress Poisson fluctuations. Figure 2: Main panel: Microphotograph of part of the absorber device on the quartz substrate, including sections of the 57 Fe film and of one of the SAW couplers. Inset: higher magnification detail of one of the SAW couplers. The amplitude of the SAW generated by the coupler is given by A=C_{\perp}\,\eta\sqrt{P_{\mathrm{in}}} , where P_{\mathrm{in}} is the applied RF power, \eta=0.35 is the overall electro-acoustic attenuation 22 , and C_{\perp} is the out-of-plane displacement conversion constant (in units of \mathrm{m/\sqrt{W}} ) that depends on the mechanical properties of the substrate. The attenuation factor \eta accounts for losses due to electrical reflection, device geometry, acoustic attenuation, and

Read the complete text