Modeling of radiating curved cables via coupled telegrapher’s and Maxwell’s equations

Markus Clemens, Michael Günther, Timo Reis, Nathanael Skrepek · 2025

Read Modeling of radiating curved cables via coupled telegrapher’s and Maxwell’s equations by Markus Clemens, Michael Günther, Timo Reis, Nathanael Skrepek (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-02736.txt.

Introduction

Markus Clemens, Michael Günther, Timo Reis, and Nathanael Skrepek present a 2025 applied mathematics paper modelling how cable harnesses radiate and interfere electromagnetically, allowing the cables to curve. Standard transmission line models assume straight cables, which real harnesses rarely are.

Each cable follows the telegrapher's equations, the classic transmission line model, driven by signals imposed at its ends. Cables interact through radiation governed by Maxwell's equations, with the coupling entering through boundary conditions on the field. The combined system is energetically consistent: the authors prove a global power balance holds, so energy is neither created nor destroyed by the coupling. The model suits time-domain simulation of realistic wiring in vehicles and aircraft, where curved bundles and radiation both matter.

Catalog record

CREATORMarkus Clemens, Michael Günther, Timo Reis, Nathanael Skrepek
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE84 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-02736

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Modeling of radiating curved cables via coupled telegrapher’s and Maxwell’s equations Markus Clemens, Michael Günther, Timo Reis, Nathanael Skrepek Abstract . We investigate the electromagnetic interactions of cable harnesses in the time domain. We present a novel model that allows for curved cables, extending the standard assumptions typically made in transmission line modeling. The cables are described by the telegrapher’s equations, the classical model for transmission lines, driven by input signals implemented through appropriate boundary conditions, such as imposed voltages at cable ends. The cables interact via electromagnetic radiation; the latter is determined by Maxwell’s equations. This interaction is incorporated into the model through boundary conditions imposed on the electromagnetic field. The resulting coupling between the transmission lines and Maxwell’s equations is energetically consistent. In particular, we show that the coupled system satisfies a global power balance. 1991 Mathematics Subject Classification 35Q61, 78A25, 78A40 1. Introduction Though all electromagnetic effects are described by Maxwell’s equations, there are a variety of situations where simplified models result in an acceptable picture of reality. One of these is the transmission lines, which involves current and voltage distributions along spatially one-dimensional cables (for this reason, we use the terms “cable” and “transmission line” interchangeably throughout this article). These are modelled by the telegrapher’s equations, a hyperbolic partial differential equation in one spatial dimension. This model reflects physical effects like crosstalk, time delay and energy loss, which typically occur when comparatively long cables are driven with high-frequency voltages and currents [ 10 , 14 , 7 ] . Transmission lines, however, typically do not form a closed physical system; instead, they may interact with an electromagnetic field in a bidirectional manner: The voltages and currents along the cables cause electromagnetic radiation and, vice-versa, an electromagnetic field excites voltages and currents along the cables. Overall, one obtains a model consisting of coupled telegrapher’s and Maxwell’s equations. For this type of problem there exists a rich literature in electrical engineering such as, to mention only a few, [ 19 , 13 , 17 , 11 , 15 , 1 ] . In all of these works, the cables are assumed to be straight. In contrast, we allow for curved cables, while still assuming a constant circular cross-section. We consider k cables interacting with the surrounding electromagnetic field. The dynamics of voltages and currents along the cables are extended to their lateral surfaces, which form two-dimensional manifolds. These quantities serve as tangential boundary values for the electric and magnetic field intensities governed by Maxwell’s equations, which describe the electromagnetic field outside the cables. The inputs and outputs of the overall system are given by the boundary values of the telegrapher’s equations, i.e., the voltages and currents at the ends of the cables. The following table illustrates the mixed-dimensional nature of the problem by summarizing the physical quantities involved in the system, categorized by spatial dimension and their roles in the system-theoretic context. Spatial Quantity Role Dimension 0 voltages/currents at cable ends inputs and outputs 1 charges/fluxes along cables part of the state 2 tangential electric/magnetic field at lateral cable surfaces coupling quantities 3 electric/magnetic flux density in the electromagnetic field part of the state Note that the transmission line model is one-dimensional, which leads to a dimensional mismatch with the coupling quantities. We address this mismatch using suitable lifting operators, in a manner similar to [ 9 ] . Since the state of the overall system consists of functions of spatial variables, the state space is infinite-dimensional. The inputs and outputs are defined by a class of linear combinations of the boundary voltages and currents of the transmission lines. Consequently, both the input and output spaces are finite-dimensional. This article is organized as follows. After introducing the notation and presenting some basic facts about Maxwell’s equations in the remainder of this section, we separately discuss the models for the cables and the electromagnetic field in Section 2 and Section 3 , respectively. Boundary-controlled telegrapher’s equations and Maxwell’s equations are treated independently. This part also introduces the input-output configuration, appropriate initial and boundary conditions, and our assumptions on the cable geometry and the computational domain in which the electromagnetic field evolves. Thereafter, in Section 4 , we take a closer look at the operators responsible for the coupling. These are the heart of the model, as they lift the 1-D functions from the transmission lines to 2-D functions on the lateral surfaces of the cables, which in turn act as tangential boundary values for the Maxwell equations involving 3-D functions. This will be used to show that the overall system admits a power balance. Notation and convention We use \id for the identity mapping, \id_{n} stands for the unit matrix of size n\times{n} . Further, we write \langle\bm{\cdot},\bm{\cdot}\rangle_{X} for the inner product in an inner product space X , and A^{\ast} for the adjoint of an operator A acting between inner product spaces. Together with the fact that \mathbb{C}^{n} and \mathbb{C}^{m} are equipped with the Euclidean inner product, this means that A^{\ast}\in\mathbb{C}^{n\times m} is the conjugate transpose of A\in\mathbb{C}^{m\times n} . Likewise, x^{*} is the conjugate transpose of x\in\mathbb{C}^{n}\cong\mathbb{C}^{n\times 1} , such that the inner product in \mathbb{C}^{n} reads \langle x,y\rangle_{\mathbb{C}^{n}}=y^{\ast}x. For P\in\mathbb{C}^{n\times n} , we write P>0 ( P\geq 0 ), if P=P^{\ast} is positive (semi-)definite. Likewise, P<0 ( P\leq 0 ) means that P=P^{\ast} is negative (semi-)definite. Further, A^{\dagger}\in\mathbb{C}^{n\times m} denotes the Moore-Penrose inverse of A\in\mathbb{C}^{m\times n} . Prologue: Maxwell’s equations Although Maxwell’s equations are well known, we briefly recall them here to fix our notation. These equations form the foundation of all electromagnetic dynamics, including those arising in circuits and transmission lines. In this article, we restrict ourselves to the linear Maxwell equations, which involve the \mathbb{R}^{3} -valued physical quantities \bm{B} : magnetic flux density, \bm{D} : electric flux density. The arguments are time t and space \xi , where the latter is an element of some given domain \Omega\subset\mathbb{R}^{3} . By writing \bm{B}(t) , \bm{D}(t) , and \bm{J}_{\ext}(t) , we refer to the spatial distributions of the magnetic flux density, electric flux density, and externally applied current density at time t , respectively. That is, \bm{B}(t) , \bm{D}(t) , and \bm{J}_{\ext}(t) are \mathbb{R}^{3} -valued functions defined on \Omega . In the case of linear constitutive relations and linear losses, Maxwell’s equations read (1) \frac{\partial}{\partial t}\begin{pmatrix}\bm{B}(t)\\ \bm{D}(t)\end{pmatrix}=\begin{bmatrix}0&-\rot\\ \rot&-\bm{\sigma}\end{bmatrix}\begin{pmatrix}\bm{\mu}^{-1}\bm{B}(t)\\ \bm{\epsilon}^{-1}\bm{D}(t)\end{pmatrix}+\begin{pmatrix}0\\ \bm{J}_{\ext}(t)\end{pmatrix}. Here, \bm{\mu}\colon\Omega\to\mathbb{C}^{3\times 3} represents magnetic permeability, \bm{\epsilon}\colon\Omega\to\mathbb{C}^{3\times 3} represents electric permittivity, and \bm{\sigma}\colon\Omega\to\mathbb{C}^{3\times 3} corresponds to electric conductivity. The quantities \bm{H}(t)\coloneqq\bm{\mu}^{-1}\bm{B}(t) and \bm{E}(t)\coloneqq\bm{\epsilon}^{-1}\bm{D}(t) are referred to as the magnetic and electric field intensities, resp. Typically, Maxwell’s equations are supplemented with the conditions (2) \operatorname{div}\bm{B}(t)=0,\quad\operatorname{div}\bm{D}(t)=\bm{\rho}(t), where \bm{\rho}(t)\colon\Omega\to\mathbb{C} is a scalar field representing charge density at time t . 2. Transmission lines We now consider the modeling of the cables. They are described by the telegrapher’s equations, the standard model for transmission lines. To account for the interaction with the electromagnetic field at a later stage, these equations are augmented by an additional source term distributed along the transmission line. We then introduce suitable boundary conditions that model the electrical connection at the cable terminals. 2.1. Telegrapher’s equations with distributed excitation We consider k transmission lines, which are modelled by the telegrapher’s equations with additional current excitation and

Read the complete text