Raman spectroscopy of graphite with water as the pressure medium
K. Perry, A. T. Roy, A. R. Parmenter, Y. J. Ryu, V. B. Prakapenka, J. Lim · 2025
Read Raman spectroscopy of graphite with water as the pressure medium by K. Perry, A. T. Roy, A. R. Parmenter, Y. J. Ryu, V. B. Prakapenka, J. Lim (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-01890.txt.
Introduction
K Perry leads five co-authors in a high pressure study of graphite mixed with water. Raman spectroscopy reads molecular vibrations from scattered light to track structure under pressure. Water serves as the pressure medium, the fluid that squeezes the sample evenly, up to near ten gigapascals, a unit of huge pressure. In graphite rich zones, three hallmark bands are tracked as pressure climbs.
The main band shifts strongly toward higher frequency, signaling tighter coupling between graphite layers. In water rich zones, shaking bands and three stretch bands of water appear. Past a set pressure, the shift slope drops versus an earlier report, likely due to the water medium itself. The authors call for more work at higher pressures to settle the cause.
Catalog record
| CREATOR | K. Perry, A. T. Roy, A. R. Parmenter, Y. J. Ryu, V. B. Prakapenka, J. Lim |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 14 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-01890
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Raman spectroscopy of graphite with water as the pressure medium K. Perry, A. T. Roy, A. R. Parmenter, Y. J. Ryu, V. B. Prakapenka, J. Lim Abstract We report a high-pressure Raman spectroscopy study of a graphite–water mixture using water as the pressure-transmitting medium up to 9.9 GPa 9.9\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} . In the graphite-rich region, three characteristic Raman features—the E 2 g ( 1 ) E_{2\mathrm{g}}^{(1)} shear mode, the G band ( E 2 g ( 2 ) E_{2\mathrm{g}}^{(2)} ), and the 2D band—were observed and tracked as a function of pressure. The G band exhibits a pronounced blue shift with increasing pressure, indicating enhanced interlayer coupling between graphite planes. In the water-rich region, the librational band and three distinct O–H stretching modes were identified. Notably, above 8 GPa 8\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} , the slope of the pressure dependence decreases relative to the earlier report, likely due to the influence of the water pressure medium, emphasizing the need for further investigation at higher pressures. I Introduction High pressure provides a powerful means to synthesize novel materials that are difficult to obtain under ambient conditions, as it directly modifies the system’s energy by compressing its volume Jackson et al. 2005 . Moreover, certain materials produced under high pressure can remain stable at ambient conditions if they occupy a kinetically metastable region of the energy landscape Allan et al. 2021 . A well-known example is the transformation of graphite into diamond under combined high-pressure and high-temperature conditions BOVENKERK et al. 1959 . The cold compression of graphite can induce phase transitions to new carbon allotropes, which has been a subject of intense debate for decades due to the sluggish kinetics of the transformation. Unlike the direct transition from graphite to diamond at high temperature, room-temperature compression produces one or more intermediate, or “post-graphite,” phases, whose precise structural characteristics remain unclear. The nature of the resulting post-graphite phase remains poorly understood, and even its crystal structure has not been fully determined Wang et al. 2012 . A key effect of high pressure is the conversion of graphite’s planar sp^{2} bonding to the three-dimensional sp^{3} bonding characteristic of diamond-like structures. The use of water as a pressure-transmitting medium may lower the pressure required for this transition. For instance, studies on bilayer graphene have shown that the G and 2D Raman peaks disappear at approximately 37 GPa in the presence of water, indicating the onset of sp^{2} to sp^{3} conversion Tao et al. 2020 . It is hypothesized that water molecules facilitate the formation of new sp^{3} bonds by providing oxygen- or hydrogen-containing functional groups that interact with the carbon lattice under high pressure. In contrast, experiments using alternative pressure media, such as silicone oil, do not show this effect at similar pressures. High-pressure Raman spectroscopy of graphite–water mixtures offers an opportunity to probe these structural changes in detail. In this study, we investigate how the presence of water, acting as a pressure-transmitting medium, influences the high-pressure behavior of graphite and provides insight into its phase transitions. II Methods To generate high pressure in the graphite–water mixture, diamond anvil cells (DACs) with two opposing diamond anvils (1/3-carat, type Ia) and 0.3\text{\,}\mathrm{mm} culet diameter were employed. A pre-indented stainless steel gasket (from 200\text{\,}\mathrm{\SIUnitSymbolMicro m} to 50\text{\,}\mathrm{\SIUnitSymbolMicro m} thickness) with a 150\text{\,}\mathrm{\SIUnitSymbolMicro m} -diameter hole drilled at the center using a laser drilling machine was placed between the diamond anvils to form the sample chamber. The graphite samples consisted of thin foils of Highly Oriented Pyrolytic Graphite (HOPG, Alfa Aesar) prepared via the scotch tape method. From these, 10\text{\,}\mathrm{\SIUnitSymbolMicro m} -thick HOPG films were selected, cut to 80\text{\,}\mathrm{\SIUnitSymbolMicro m} in diameter, and loaded into the sample chamber. Ruby powders were also added for pressure calibration Dewaele et al. 2008 . Research-grade deionized water was then introduced into the chamber using a syringe. Microphotographs in the insets of Figs. 3 and 4 illustrate the sample space. Further details of the HOPG sample preparation in DACs are provided in Ref. Lim and Yoo 2016 . Raman spectra were collected in a backscattering geometry at the GSECARS Raman Laboratory using a 2-W Innova 90P argon ion laser and a Raman spectrometer. This system allows for offline Raman spectroscopy and ruby fluorescence-based pressure measurements. A 532\text{\,}\mathrm{nm} laser was used to excite the sample. Pressure was increased up to 9.9\text{\,}\mathrm{GPa} and subsequently released down to 2.1\text{\,}\mathrm{GPa} . A broad fluorescence background is also present, likely arising from nitrogen impurities in the type Ia diamonds, which fluoresce under 532\text{\,}\mathrm{nm} laser excitation. III Results Figure 1: Selected regions of the Raman spectra of the graphite-rich area in a graphite–water mixture up to 9.9\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} (compression) and down to 2.1\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} (decompression), highlighting three characteristic features: the E_{2\mathrm{g}}^{(1)} mode, the G band ( E_{2\mathrm{g}}^{(2)} ), and the 2D band, observed in the ranges of 20– 130\text{\,}{\mathrm{cm}}^{-1} , 1550– 1660\text{\,}{\mathrm{cm}}^{-1} , and 2690– 2900\text{\,}{\mathrm{cm}}^{-1} , respectively. A second-order Raman signal from the diamond anvils, appearing around 2700\text{\,}{\mathrm{cm}}^{-1} , precedes the 2D band. Sharp features with widths less than 5\text{\,}{\mathrm{cm}}^{-1} are considered spectral artifacts. Figure 1 presents the Raman spectra of the graphite-rich region in the graphite–water mixture, with water serving as the pressure medium, under compression up to 9.9\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} and decompression down to 2.1\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} . Three characteristic features are highlighted: the E_{2\mathrm{g}}^{(1)} mode, the G band ( E_{2\mathrm{g}}^{(2)} ), and the 2D band, observed in the ranges of 20– 130\text{\,}{\mathrm{cm}}^{-1} , 1550– 1660\text{\,}{\mathrm{cm}}^{-1} , and 2690– 2900\text{\,}{\mathrm{cm}}^{-1} , respectively. Sharp peaks with widths narrower than 5\text{\,}{\mathrm{cm}}^{-1} are identified as spectral artifacts. The E_{2\mathrm{g}}^{(1)} mode at \sim 70\text{\,}{\mathrm{cm}}^{-1} is relatively weak because it corresponds to shear motion between adjacent graphite planes and is challenging to detect due to its low frequency. Nevertheless, the high sensitivity of the Raman system allows this mode to be observed. The G band, centered near 1600\text{\,}{\mathrm{cm}}^{-1} , corresponds to the in-plane stretching vibration of sp 2 carbon atoms within the hexagonal lattice. It is a defining feature of graphene-related materials and is highly sensitive to doping, strain, and temperature Wu et al. 2018 . The peak at \sim 2800\text{\,}{\mathrm{cm}}^{-1} corresponds to the 2D band, a second-order two-phonon overtone of the D band, although its signal is partially obscured by the diamond anvil Raman background (not shown). The 2D band is particularly sensitive to graphene layer number, and its shape and position can be used to assess the thickness of few-layer graphene Wu et al. 2018 . With increasing pressure, all three Raman features shift to higher wavenumbers (blue shift), reflecting strengthened interatomic interactions under compression. Figure 2: Selected regions of the Raman spectra of the water-rich area in a graphite–water mixture up to 9.9\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} (compression) and down to 2.1\text{\,}\mathrm{G}\mathrm{P}\mathrm{a} (decompression), highlighting two characteristic regions: the librational band (50– 500\text{\,}{\mathrm{cm}}^{-1} ) and the O–H stretching modes (2900– 3660\text{\,}{\mathrm{cm}}^{-1} ), including the in-phase symmetric stretch ( A_{1\mathrm{g}} ), the in-phase asymmetric stretch ( E_{\mathrm{g}} ), and the out-of-phase stretch ( B_{1\mathrm{g}} ). Sharp features with widths less than 5\text{\,}{\mathrm{cm}}^{-1} are considered spectral artifacts. Figure 2 shows the Raman spectra of the water-rich region of the graphite–water mixture under the same pressure conditions. Two characteristic spectral regions are observed: the librational band (50– 500\text{\,}{\mathrm{cm}}^{-1} ) and the O–H stretching region (2900– 3660\text{\,}{\mathrm{cm}}^{-1} ). A librational band, arising from