Energy non-equipartition in vibrofluidized particles
Alok Tiwari, Manaswita Bose, V. Kumaran · 2025
Read Energy non-equipartition in vibrofluidized particles by Alok Tiwari, Manaswita Bose, V. Kumaran (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-00474.txt.
Introduction
Alok Tiwari, with two co-authors, Manaswita Bose and V Kumaran, studies a shaken box of round grains, a system called vibrofluidized because shaking makes grains move like a fluid. They ask whether energy spreads evenly between sliding and spinning motion.
Using computer runs in LAMMPS, a simulation code, Tiwari and his co-authors vary friction and the stiffness of sideways springs between grains. For one stiffness choice, the ratio of sliding to spinning energy falls, then stops changing as friction grows. For higher stiffness values, that even split fails for very rough grains. The results show that contact details, often simplified away, control how shaken grains share energy.
Catalog record
| CREATOR | Alok Tiwari, Manaswita Bose, V. Kumaran |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 20 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2509-00474
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Energy non-equipartition in vibrofluidized particles Alok Tiwari, Manaswita Bose, V. Kumaran Abstract The aim of the present work is to investigate the influence of the realistic model parameters on the equipartition of energy in a vibrofluidized system. To achieve this, a three-dimensional vertically vibrated granular system consisting of spherical particles is simulated using the discrete element method (DEM) using the open-source software LAMMPS. Interparticle and wall-particle interactions are determined using the linear-spring dashpot model. Simulations are performed for nearly perfectly smooth to nearly perfectly rough particles. Two different values for the ratio of the tangential to normal spring stiffness coefficient κ \kappa ( 2 / 7 2/7 and 3 / 4 3/4 ) are chosen. Non-equipartition of energy between the translational and rotational modes is observed for all realistic values in the parametric range. I Introduction The equipartition theorem states that the kinetic energy is equally distributed among all degrees of freedom in a fluid ( Reif 1965 ) ; however, the equipartition of energy deviates in gases in round vessels ( Naplekov and Yanovsky 2023 ) , bio-molecules ( Eastwood et al. 2010 ) , laser-cooled atoms ( Afek et al. 2020 ) , non-spheroidal molecules ( Erpenbesk and Cohen 1988 ) , granular mixtures ( Paolotti et al. 2003 ; Wildman and Parker 2002 ; Puzyrev et al. 2024 ) , homogeneously cooling systems ( Trittel et al. 2024 ) , and granular gases with rough particles ( McNamara and Luding 1998 ) . A seemingly simple system of a vibro-fluidized smooth particles deviates from equipartition of energy ( Kumaran 1998a ) and anisotropy in the fluctuating kinetic energy T_{x,y,z}=\frac{1}{2}\langle(u_{x,y,z}-\langle u\rangle_{x,y,z})^{2}\rangle is observed. The anisotropy in T_{x,y,z} in a vertically vibrated granular system is due to the fact that the fluctuating kinetic energy is transferred from the bottom plate to the particles in the vertical direction. The energy is then distributed in the other two directions due to subsequent inter-particle interactions. The isotropic mean squared fluctuating kinetic energy of the particles (T_{o}) , which is obtained equating the rate of energy input to the system due to bottom-wall particle collision and rate of dissipation due to inelastic inter-particle collisions at the leading order in a moment expansion method ( Kumaran 1998b ) , scales as \frac{U^{2}}{N\,d^{2}\left(1-e_{n}^{2}\right)} , where U_{o} is the wall velocity, N is the number density, d the particle diameter and e_{n} the normal coefficient of restitution. The difference in the T_{x},T_{y} and T_{z} is maximum near the bottom wall and monotonically decreases along the bed height and the T_{x,y,z} asymptotically approaches T_{o} for N\,d^{2}\left(1-e_{n}^{2}\right)<<1 ( Kumaran 1998b ; Sunthar and Kumaran 1999 ) . The behaviour is different if the dissipation due to air drag is considered. In an assembly of realistic granular particles, the partitioning of energy between the translational and rotational modes depends on the surface roughness ( Rao and Nott 2008 and references therein). In the limit of the nearly smooth particles, the rotational and translational kinetic energies are independently balanced, and the kinetic energy is not equi-partitioned between the rotational and the translational degrees of freedom. In the other limit of nearly perfectly rough particles, the partition of kinetic energy depends on the particle inelasticity and the surface roughness quantified in terms of the normal ( e_{n} ) and the rotational ( \beta ) coefficient of restitution ( Rao and Nott 2008 ) . McNamara and Luding ( McNamara and Luding 1998 ) defined a ratio R=\frac{\Delta E^{o}}{\Delta\overline{E}+\Delta E^{o}} to quantify the partition of energy between the translation and rotational model. Through event-driven simulations, they showed that R weakly depends on the coefficient of restitution for \beta\approx 0 . In the energy conserving limits, i.e., \beta\sim-1\,\,\mathrm{or}\,\,+1 , R is independent of e_{n} . Grasselli et al Grasselli et al. 2015 studied the anisotropy in a 2-D vibro-fluidized granular bed in micro-gravity. They determined the rotational coefficient of restitution, the ratio of the rotational to the translational kinetic energy ( R_{T} ), and observed that the anisotropy in the mean squared fluctuating kinetic energy depends on the area fraction. Castillo et. al Castillo et al. 2020 discussed the departure from equipartition in the context of a granular system in a magnetically levitated bed. Though non-equipartition of kinetic energy in granular systems is largely observed, Nichol and Daniels ( Nichol and Daniels 2012 ) reported nearly equipartition of energy between the translational and the rotational modes for a dense bi-disperse mixture subject to periodic excitement on an air table. Potiguar ( Potiguar 2021 ) performed numerical simulations for the experimental set-up discussed in ( Nichol and Daniels 2012 ) . They used a linear spring dashpot model ( Cundall and Strack 1979 ) to determine the contact force between the colliding disk-shaped particles, with the spring stiffness constant, k_{n}=5\times 10^{4}\frac{mg}{d} , and \gamma , the dissipation coefficient, as two parameters. The tangential force is determined from the sliding friction coefficient ( \mu ). Simulations were performed for a wide range of \gamma , resulting in 0.2<e_{n}<0.9 and for \mu=0.5 . They observed that the ratio of the translation to the rotational kinetic energy depends on the number density, coefficient of restitution, frequency, and magnitude of the energy injected. It is evident from the literature that the non-equipartition of energy in a granular system depends on a variety of aspects, including the particle properties, the dissipation mechanism, and the number density. The objective of the present work is to systematically investigate the effect of the friction coefficient and the ratio of the tangential to the normal stiffness coefficients on the partition of fluctuating kinetic energy between the translational and rotational modes of vibro-fluidized particles using the Discrete Element Method (DEM) and analyse the results in the framework proposed in ( McNamara and Luding 1998 ; Rao and Nott 2008 ) . To that end, simulations are performed using the open-source software LAMMPS with large values of spring stiffness constant, k_{n}>10^{7}\frac{mg}{d} ( Reddy and Kumaran 2010 ; Tiwari et al. 2025 ) to ensure binary collisions. II Methodology II.1 Background theory In the simplest hard-sphere model the collisions are characterized by two parameters: the normal ( e_{n}=-\frac{v_{n}^{\prime}}{v_{n}} ) and the rotational coefficients of restitution (\beta=-\frac{\vec{v}_{s}^{\prime}\cdot\hat{k}_{s}}{\vec{v}_{s}\cdot{k}_{s}}) , where, v_{n} is the component of the relative velocity of particles along the line joining the centres of particles, and \vec{v}_{s}=\vec{v}_{ij}-\vec{v}_{n}+\frac{d}{2}\left(\hat{r}_{ij}\times\vec{\omega}_{ij}\right) is the slip velocity of the point of contact. The primed quantities represent the post-collision properties. i and j are particle indices, \hat{r}_{ij} is the unit vector drawn from particle centre of i to the centre of j , the subscript n refers to the normal direction, \vec{v}_{ij} is the relative velocity of the particle i with respect to j , and \vec{\omega}_{ij} is the relative angular velocity, \hat{k}_{s} is the unit vector in the slip direction. The changes in the translational, rotational, and total kinetic energy, during a collision, are expressed by Equations II.1 – II.1 : \displaystyle\Delta\left(\frac{1}{2}v^{\prime 2}\right)=-\frac{1}{4}(1-e_{n}^{2})(\hat{r}_{ij}\cdot\vec{v}_{ij})^{2} \displaystyle-\eta_{2}\left(\hat{r}_{ij}\times\vec{G}\right)\cdot\left(\hat{r}_{ij}\times\vec{G}\right) \displaystyle+\eta_{2}^{2}\left|\hat{r}_{ij}\times\vec{G}\right|^{2}-\eta_{2}\left(\vec{\omega}_{ij}\cdot\left(\hat{r}_{ij}\times\vec{G}\right)\right) (1) \displaystyle\Delta\left(\hat{I}\omega^{\prime 2}\right)=\eta_{2}\left(\vec{\omega}_{ij}\cdot\left(\hat{r}_{ij}\times\vec{G}\right)\right) \displaystyle+\frac{\eta_{2}^{2}}{\hat{I}}\left(\hat{r}_{ij}\times\vec{G}\right)\cdot\left(\hat{r}_{ij}\times\vec{G}\right) (2) \displaystyle\Delta E=\Delta\left(\frac{1}{2}v^{\prime 2}\right)+\Delta\left(\hat{I}\omega^{\prime 2}\right)=-\frac{1}{4}(1-e_{n}^{2})(\hat{r}_{ij}\cdot\vec{v}_{ij})^{2}- \displaystyle\frac{\hat{I}}{1+\hat{I}}\frac{1-\beta^{2}}{4}\left(\hat{r}_{ij}\times\vec{G}\right)\ \cdot\left(\hat{r}_{ij}\times\vec{G}\right) (3) where \Delta\left(\frac{1}{2}v^{\prime 2}\right) = \frac{1}{2}(v_{i}^{2}-v_{i}^{\prime 2})+\frac{1}{2}(v_{j}^{2}-v_{j}^{\prime 2}) , \eta_{2}=\frac{1}{2}(1+\beta)\hat{I}/(1+\hat{I}) , \vec{G}=\vec{v}_{ij}+\vec{r}_{ij}\times(\vec{\omega}_{i}+\vec{\omega}_{j}) , \hat{I}=4I/md^{2} , and I is the moment of inertia. Mass( m ) and diameter ( d ) of the particles are used