POKEMON: print optimization for kilo-fiber experiments using micro-optics and nanostructures

Megan Delamer, Suvrath Mahadevan, Chad Bender, Ceiwynn Longworth, Roger Angel, Joel Berkson, On To Sonja Choi, Kathleen Gehoski, Andy Monson, Christian Schwab · 2025

Read POKEMON: print optimization for kilo-fiber experiments using micro-optics and nanostructures by Megan Delamer, Suvrath Mahadevan, Chad Bender, Ceiwynn Longworth, Roger Angel, Joel Berkson, On To Sonja Choi, Kathleen Gehoski, Andy Monson, Christian Schwab (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2509-00181.txt.

Introduction

Megan Delamer and nine co-authors present POKEMON in 2025, print methods to align microlenses with thousands of fibers for a new telescope array. Modern astrophysics needs huge light-collecting area, but giant mirrors cost billions. The Large Fiber Array Spectroscopic Telescope instead arrays many smaller mirrors, each feeding its own fiber to shared spectrometers.

Joining each fiber bundle to the spectrometer slit must be precise to keep the light gain. Two-photon polymerization printing now makes optical-quality microlenses and nanostructures that can align each fiber. The paper reports optimization of that print step for kilo-fiber experiments. Cheap, precise coupling could make array telescopes rival far costlier giants.

Catalog record

CREATORMegan Delamer, Suvrath Mahadevan, Chad Bender, Ceiwynn Longworth, Roger Angel, Joel Berkson, On To Sonja Choi, Kathleen Gehoski, Andy Monson, Christian Schwab
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2509-00181

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

POKEMON: print optimization for kilo-fiber experiments using micro-optics and nanostructures Megan Delamer, Suvrath Mahadevan, Chad Bender, Ceiwynn Longworth, Roger Angel, Joel Berkson, On To Sonja Choi, Kathleen Gehoski, Andy Monson, Christian Schwab Abstract The most pressing problems in modern astrophysics have often required the largest telescopes. With the cost scaling of mirror diameters, the field as a whole is faced with a challenge- how to replicate or improve on the collecting area and sensitivity of the current generation of ELTs, which already boast 30 m class apertures and are multi-billion dollar facilities. One such approach is being pursued by the Large Fiber Array Spectroscopic Telescope (LFAST) - a scalable array telescope. Each element of the array will consist of multiple mirrors each feeding to an individual fiber; with those fiber feeds feeding optical and infrared spectrometers. Coupling fiber bundle to spectrometer slit input must be optimized to take full advantage of the photon collecting ability of the telescope array, requiring precise alignment of microlenses to each fiber. Advances in two photon polymerization processes (2PP) now allow for optical quality microlenses with wavefront aberrations as small as λ / 20 \lambda/20 [ 1 ] to be created, opening up the design parameter of bespoke optical design and custom fabricated lenses. We present our approach to tackling these coupling problems with rapid prototyping and detailed quantification of the tolerances of the lenses. Our approach leverages our access to the Nanoscribe GT2 system at Penn State, enabling tests of new optically transparent resins like IPX-Clear to explore multiple design approaches. Our goal is to share our results and enable wider use of these techniques for astronomical applications. a]Pennsylvania State University b]Center for Exoplanets and Habitable Worlds c]University of Arizona d]Macquarie University keywords nanofabrication, microlens arrays, two photon polymerization † † authorinfo: Further author information: (Send correspondence to M.D.) M.D.: E-mail: [email protected] 1 INTRODUCTION Several subfields of astrophysics are “photon-starved”, where the discovery space is limited by the number of photons that can be collected from a particular source. While advancements in detector technology significantly improved amplitude of signals throughout the 20th century, the biggest gains now are realized as the primary mirror grows in diameter. The newest generation of ground-based observatories are often referred to as the Extremely Large Telescopes (ELTs) and are projected to come online in the upcoming decades. While every one of these facilities will be extremely sensitive due to their 30 meter class mirrors and be capable of exploring the fundamental physical laws that drive our universe, the cost of such facilities will also be astronomical. Telescope costs scale non-linearly with the diameter of the primary mirror (D); first order approximations give cost as proportional to D n , where n ranges from 2.0-2.8 depending on design choices and decade of construction [ 2 , 3 ] . Some exceptions to this relationship were able to reduce costs while sacrificing operational flexibility; fixing the altitude of the telescope (e.g. the Hobby-Eberly Telescope [ 4 , 5 ] ) reduces the amount of structure needed to support the mirrors, though it also reduces the number of visible targets at any given time. An alternative to the traditional single aperture construction is the combination of many smaller apertures feeding light into a single instrument, often using optical fibers to connect the individual apertures as first proposed by Angel et al. [ 6 ] . The Miniature Exoplanet Radial Velocity Array (MINERVA) [ 7 ] and MINERVA-Australis [ 8 ] both utilize a number of smaller aperture telescopes that can either work independently or in concert depending on the science case. The approaches used to combine light from the individual apertures limit the number that can be utilized in these designs for various reasons and none of them have the collecting area of an ELT mirror. The major advantage in multi-aperture designs is the lowered cost of support structures; although glass is expensive and a multi-aperture set-up does not decrease that expense, the cost of both domes and the physical mounts for fully steerable telescopes is approximately proportional to D 3 [ 3 ] . Upcoming projects such as Multi Array of Combined Telescopes (MARCOT) [ 9 ] and PolyOculus [ 10 ] are taking advantage of this proportionality to provide a low cost alternative to traditional monolithic mirrors, but still at smaller effective aperture sizes than the ELTs. LFAST is new telescope concept designed to scale to a collecting area equivalent to that of the ELTs, but able to be constructed at a very low cost [ 11 ] . The array is designed using 0.76 m primary mirror apertures mounted in groups of 20, which provides the equivalent collecting area of a traditional 3.5 m aperture for each system. The full telescope array will consist of 132 20-unit systems for a total collecting area of 1,200 m 2 [ 11 , 12 ] . To save further on overall cost, the systems will not be housed in domes, instead they will be provided with automated removable covers and stored pointing 15 o below the horizon to avoid dust settling on the mirror surfaces [ 13 ] . Each individual aperture will feed to its own optical fiber with an 18 micron diameter core to have an on sky footprint of 1.4 arcsec [ 14 ] . The light from these fibers will be combined into one rectangular fiber and fed into one or more spectrometers. A major technical challenge is combining the light with minimal losses, such that the system is able to take full advantage of the photon collecting ability of each individual mirror. LFAST fibers will be combined using a two dimensional microlens array, with each microlens placed precisely over the center of the optical fibers to minimize photon loss [ 11 ] . While standard fabrication techniques for creating optical elements are capable of producing spherical lenses down to 0.3 mm in diameter, complex systems such as the microlens array needed to combine the light from 2640 individual telescopes are more challenging. Instead, we are creating the microlenses using 2PP, a 3D printing method that utilizes a femtosecond laser and a high numerical aperture focusing objective to transition a pool of liquid resin into a solid polymerized state [ 15 , 16 ] . The advantage of using two photons in quick succession to bridge an energy gap rather than using a single photon of higher energy is the single photon method will induce polymerization all along the path of the laser, while the cross section for the two photon method produces a very small region (the voxel) where sufficient energy is available to polymerize resin [ 17 ] . Recently available resins with high transmission across the optical and near IR wavelength range, such as IPX-Clear 1 1 1 https://www.nanoscribe.com/en/products/ipx-photoresins/photoresin-ipx-clear-for-highly-transparent-microoptics/ , are ideal for the planned wavelength coverage of LFAST (390 nm - 1700 nm) [ 11 , 12 ] . In this work, we present the ongoing work to produce a 2x10 microlens array for the initial LFAST prototype currently under construction at the University of Arizona. We will describe our fabrication process, the current status of the prototype, and future work. 2 DESIGN AND

Read the complete text