On the Deployment of Multiple Radio Stripes for Large-Scale Near-Field RF Wireless Power Transfer

Amirhossein Azarbahram, Onel L. A. López, Petar Popovski, and Matti Latva-Aho · 2025

Read On the Deployment of Multiple Radio Stripes for Large-Scale Near-Field RF Wireless Power Transfer by Amirhossein Azarbahram, Onel L. A. López, Petar Popovski, and Matti Latva-Aho (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-21640.txt.

Introduction

Amirhossein Azarbahram, Onel López, Petar Popovski, and Matti Latva-Aho plan ceiling-mounted radio stripes that beam power to devices indoors, in this 2025 paper. Radio stripes are chains of small antennas strung along a strip. The goal is wireless power transfer in the near field, aimed at hotspots where devices cluster and energy demand concentrates.

The authors split the planning problem in two: first cluster the stripes among hotspots by position and near-field behavior, then place the antenna elements. They offer four placement methods, two from general optimization tools and two that force simple shapes, straight lines or regular polygons, for easy installation. In simulations the clustering settled reliably, especially with a Chebyshev starting guess, and the optimized layouts beat baselines across frequencies and stripe lengths. Polygon layouts performed best overall, while line layouts won when the antenna beam pointed strongly forward.

Catalog record

CREATORAmirhossein Azarbahram, Onel L. A. López, Petar Popovski, and Matti Latva-Aho
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE70 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-21640

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On the Deployment of Multiple Radio Stripes for Large-Scale Near-Field RF Wireless Power Transfer Amirhossein Azarbahram, Onel L. A. López, Petar Popovski, and Matti Latva-Aho Abstract This paper investigates the deployment of radio stripe systems for indoor radio-frequency (RF) wireless power transfer (WPT) in line-of-sight near-field scenarios. The focus is on environments where energy demand is concentrated in specific areas, referred to as ’hotspots’, spatial zones with higher user density or consistent energy requirements. We formulate a joint clustering and radio stripe deployment problem that aims to maximize the minimum received power across all hotspots. To address the complexity, we decouple the problem into two stages: i) clustering for assigning radio stripes to hotspots based on their spatial positions and near-field propagation characteristics, and ii) antenna element placement optimization. In particular, we propose four radio stripe deployment algorithms. Two are based on general successive convex approximation (SCA) and signomial programming (SGP) methods. The other two are shape-constrained solutions where antenna elements are arranged along either straight lines or regular polygons, enabling simpler deployment. Numerical results show that the proposed clustering method converges effectively, with Chebyshev initialization significantly outperforming random initialization. The optimized deployments consistently outperform baseline benchmarks across a wide range of frequencies and radio stripe lengths, while the polygon-shaped deployment achieves better performance compared to other approaches. Meanwhile, the line-shaped deployment demonstrates an advantage under high boresight gain settings, benefiting from increased spatial diversity and broader angular coverage. I Introduction Radio frequency (RF) wireless power transfer (WPT) is emerging as a key enabler of battery-free operation and reduced maintenance in future wireless networks. Unlike other WPT technologies, RF-WPT can simultaneously charge multiple devices through controlled radiation and integrate seamlessly with existing wireless infrastructure [ 1 , 2 ] . Interestingly, RF-WPT, referred to as WPT throughout this work, does not require a dedicated energy source; instead, RF power can be transmitted over the same infrastructure used for wireless communications. However, the main drawback of WPT is its low end-to-end efficiency, primarily due to severe wireless channel losses. Since these losses increase rapidly with distance, long-range WPT remains highly challenging. This has motivated advanced techniques such as energy beamforming and distributed antenna architectures to improve power delivery over extended ranges [ 3 ] . Beamforming can mitigate channel losses by focusing energy on the devices [ 3 ] . However, conventional multi-antenna systems with co-located elements still suffer from significant path loss, since the elements experience nearly identical propagation paths. Consequently, blockages or large user distances affect all antennas similarly, and only very large apertures could overcome this, often impractical in practice. To address non-line-of-sight limitations, reflective reconfigurable intelligent surfaces (RIS) with passive elements can be deployed [ 4 ] . However, the performance of RIS can be limited by the attenuation between the transmitter and the reflecting elements. As a more active alternative, distributed antenna systems (DAS) can be deployed across the area to reduce blind spots and shorten charging distances, thereby improving WPT efficiency [ 5 ] . Another key advantage of employing DAS is their ability to provide a large aperture diameter, which is often constrained in conventional co-located antenna arrays. As a result, DAS are more capable of supporting near-field transmission, where the wavefronts arriving at a receiver exhibit a spherical nature. Operating in the near-field enables focusing RF power toward specific spatial locations, rather than forming the beams in certain directions, which can lead to more precise and efficient energy delivery in WPT systems [ 6 ] . Recently, hybrid solutions have been proposed that combine distributed active antennas with passive reflecting surfaces to further improve the coverage [ 7 ] . Another possible solution for distributing the elements is utilizing unmanned aerial vehicle (UAV)-assisted systems. UAVs can provide both direct and short-distance energy transmission paths; thus, a UAV-assisted system with a proper trajectory design may significantly reduce the average channel loss in the system [ 8 ] . However, the energy required for UAV movement and hovering can considerably reduce the end-to-end power transfer efficiency, especially over longer durations or in dynamic environments. Moreover, fairness remains a key challenge in such systems, as relocating a UAV (or focusing energy) toward one user can significantly degrade power transfer to others, possibly leading to coverage gaps [ 9 ] . Therefore, it is essential to optimize the placement of transmit antennas based on the spatial characteristics of the deployment area and user distribution. Interestingly, radio stripe systems offer a cost-effective DAS solution in large areas. In this architecture, antenna elements and their associated processing units are embedded along a cable, enabling streamlined deployment with minimal infrastructure requirements. A sufficiently long radio stripe can accommodate a large number of antenna elements dispersed throughout the environment, thereby reducing the average distance to users and mitigating blockage issues [ 10 ] . I-A Prior Works Several studies in the literature address the deployment of DAS for WPT to enhance system efficiency and coverage. For example, the authors in [ 11 ] propose an analytical framework to determine the optimal radius of a circular layout where power beacons (PBs) are uniformly distributed, to maximize WPT efficiency. In [ 3 ] , the impact of the number of PBs on the minimum received energy is analyzed, and K-means clustering is employed to optimize PB placement. Furthermore, [ 12 ] explores multiple deployment strategies to position PBs such that the average energy harvested at the worst-case location is maximized. In [ 13 ] , a non-uniform deployment strategy for PBs is proposed, where placement density is adapted based on user locations and energy demand. This approach demonstrates that adaptive, spatially aware distributions lead to higher WPT efficiency than uniform designs. The work in [ 14 ] presents a comprehensive design and prototype of a distributed antenna WPT system, demonstrating experimentally how spatial diversity and antenna selection can be leveraged in practical deployments to improve the coverage. The study in [ 15 ] investigates the optimal placement of two transmit antennas in near-field WPT and demonstrates that even simple antenna configurations can significantly affect power delivery depending on the user’s spatial distribution. Moreover, the results emphasize the critical role of antenna deployment in near-field scenarios, showing that while co-located antennas are preferable in the far-field, distributed antenna placements are more effective in the near-field. Furthermore, [ 16 ] studies antenna deployment and power allocation in indoor environments, showing that strategic placement within the radiating near-field region significantly enhances efficiency under practical constraints. Finally, [ 17 ] experimentally demonstrates that utilizing physically large apertures, such as radio stripes, can significantly enhance the efficiency and safety of WPT. While some prior works [ 11 , 14 , 16 ] have explored DAS for WPT, and others [ 18 ] proposed beamforming techniques for radio stripe-based energy delivery, no work has yet addressed the deployment optimization of radio stripes under near-field WPT conditions. Future WPT applications are expected to take place predominantly in indoor environments, where power demand is concentrated around predefined hotspots. In such scenarios, radio stripes offer a scalable and cost-effective means to distribute transmit antennas, and the efficiency of power delivery highly depends on how the antenna elements are deployed. Unlike far-field scenarios,

Read the complete text