Scaling Fabric-Based Piezoresistive Sensor Arrays for Whole-Body Tactile Sensing

Curtis C. Johnson, Daniel Webb, David Hill, Marc D. Killpack · 2025

Read Scaling Fabric-Based Piezoresistive Sensor Arrays for Whole-Body Tactile Sensing by Curtis C. Johnson, Daniel Webb, David Hill, Marc D. Killpack (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-20959.txt.

Introduction

Curtis Johnson and three co-authors scale cloth touch sensors to cover a robot's whole body, in this 2025 paper. Whole-body touch would let robots handle objects gently, but wiring thousands of sensing points quickly becomes a tangle, and crosstalk corrupts readings. Their system pairs fabric pressure sensors with custom readout electronics.

Hardware fixes keep crosstalk under 3.3 percent. A daisy-chained serial bus links the patches, avoiding both flaky wireless and bulky hub wiring. The result streams over eight thousand sensing points across a square meter at more than fifty frames per second, fast enough for live control. In a grasping test, a robot without touch feedback slowly crushed a cardboard box. With feedback, the same motion became a gentle, stable hold. The authors offer the platform, openly documented, for research on whole-body manipulation and human-robot contact.

Catalog record

CREATORCurtis C. Johnson, Daniel Webb, David Hill, Marc D. Killpack
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-20959

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Scaling Fabric-Based Piezoresistive Sensor Arrays for Whole-Body Tactile Sensing Curtis C. Johnson, Daniel Webb, David Hill, Marc D. Killpack Abstract Scaling tactile sensing for robust whole-body manipulation is a significant challenge, often limited by wiring complexity, data throughput, and system reliability. This paper presents a complete architecture designed to overcome these barriers. Our approach pairs open-source, fabric-based sensors with custom readout electronics that reduce signal crosstalk to less than 3.3% through hardware-based mitigation. Critically, we introduce a novel, daisy-chained SPI bus topology that avoids the practical limitations of common wireless protocols and the prohibitive wiring complexity of USB hub-based systems. This architecture streams synchronized data from over 8,000 taxels across 1 m 2 of sensing area at update rates exceeding 50 FPS, confirming its suitability for real-time control. We validate the system’s efficacy in a whole-body grasping task where, without feedback, the robot’s open-loop trajectory results in an uncontrolled application of force that slowly crushes a deformable cardboard box. With real-time tactile feedback, the robot transforms this motion into a gentle, stable grasp, successfully manipulating the object without causing structural damage. This work provides a robust and well-characterized platform to enable future research in advanced whole-body control and physical human-robot interaction. I Introduction Research in robotic manipulation is driven by a desire to enhance the capabilities of robots operating in inherently unstructured environments and manipulating objects of infinite variability. While vision is a powerful modality for robotic manipulation [ 1 ] , its utility degrades when objects are occluded or when tasks require more dexterous, force-sensitive interactions. Adding more cameras can mitigate occlusion but does not scale well for complex, open-world scenarios [ 2 ] . In contrast, tactile sensing provides critical information about contact forces, local geometry, textures, and slip that is difficult or impossible to obtain with vision alone, much like haptic feedback improves human manipulation [ 3 , 4 ] . Fig. 1: Two people pressing on various parts of the robot’s sensorized surfaces (in black). This hardware implementation consists of two separate tactile sensing systems with three sensors (3072 taxels), one for each half of the robotic torso (6144 taxels total). All power and communication wiring for the entire system runs down each arm in a single cable channel. Historically, robotic tactile sensing has been concentrated at the end-effector, analogous to the human fingertip. This focus has produced a rich variety of transduction methods emphasizing localized, high resolution measurements. Prominent among these are visuo-tactile sensors, such as the GelSight family [ 5 ] , which use cameras to detect deformation in a compliant membrane [ 6 , 7 , 8 , 9 ] . Other successful approaches include capacitive [ 10 , 11 , 12 ] , magnetic [ 13 ] , and multi-modal sensors that perceive temperature or slip in addition to pressure [ 14 , 15 ] . However, humans and animals may often use their entire arm and body to facilitate manipulation of large, heavy, or bulky objects [ 16 ] . Extending sensing from the fingertip to the entire robotic body—a necessity to enable whole-arm or whole-body manipulation—introduces significant scaling challenges that render many end-effector-focuses designs impractical [ 17 , 18 ] . The difficulties are multifaceted and span the physical, electrical, and system levels. Physically, large-scale sensor arrays lead to prohibitive wiring complexity, bulk, and weight from cables, PCBs, and connectors. Electrically, they impose high data throughput requirements, increased power consumption, and greater susceptibility to electromagnetic interference (EMI) over long cables. From a systems engineering perspective, ensuring synchronized, low-latency data acquisition across hundreds or thousands of distributed taxels is critical for real-time control, but difficult to achieve while managing cost and manufacturability [ 19 ] . TABLE I: Qualitative comparison of communication topologies for closed-loop tactile control with three sensors. Ratings reflect practical performance when using three sensors concurrently and are based on empirical measurements and reported behavior in literature. Topology Throughput Low Latency & Jitter Scalability Minimal Wiring EMI Robustness I 2 C Bus [ 20 , 21 ] ✗ ✗ ✗ ✓ ✓ Peer-to-Peer [ 22 , 23 ] ✗ ✗ ✗ ✗ ✓ Star (Bluetooth) [ 20 , 24 ] ✗ ✗ ✓✓ ✓✓ ✗ Star (Wi-Fi) [ 24 ] ✓ ✗ ✓✓ ✓✓ ✗ Star (USB 2.0 Hub) [ 25 ] ✓✓ ✓ ✓ ✗ ✓ SPI + USB 2.0 (Ours) ✓ ✓ ✓✓ ✓ ✓ Fabric based piezoresistive sensors offer a compelling path forwards for large-area sensing due to their inherent low cost, durability, ease of manufacturing, light weight, and good sensitivity [ 26 , 25 ] . These sensors have been demonstrated in arrays with hundreds [ 25 ] to thousands of taxels [ 27 ] . Yet they are not without their own challenges, most notably electrical crosstalk between sensing elements in an array [ 28 , 29 ] and material property variations inherent to fabrics and polymers [ 30 ] . To address these, our readout electronics, presented on a compact, credit-card-sized PCB, implement the zero potential grounding method to substantially reduce crosstalk [ 31 ] and incorporate an adjustable sensitivity to accommodate material property inconsistencies [ 24 ] . Crucially, a scalable sensor technology must be paired with a scalable system architecture. Whole-body systems must provide reliable, synchronized measurements to support closed-loop control during unpredictable, distributed contact events [ 22 , 32 , 33 ] . We target a minimum frame rate of 50 FPS to ensure sufficient temporal resolution for closed-loop tactile control. Achieving this frame rate requires a data throughput of at least 1 Mbps per sensor. This target is informed by neurophysiological findings that human perception of tactile frequency saturates near 50 Hz, suggesting this is a sufficient rate for conveying rich temporal feedback for manipulation tasks [ 34 ] . A critical challenge in scaling up tactile systems is the choice of communication topology, which must balance bandwidth and latency with the practical constraints of physical integration. As summarized in Table I , many common architectures are ill-suited for large-scale robotic applications. Peer-to-peer topologies, for instance, become prohibitive in terms of cost and weight; a system with several thousand taxel PCBs each weighing 3 grams could add several kilograms to a robot [ 22 ] , severely limiting its manipulation capabilities (e.g., the commercially-available Franka Emika Panda robot has a maximum payload of 3 kg). Star topologies also present significant issues: wireless systems like Wi-Fi or Bluetooth are susceptible to interference and lack deterministic performance without specialized, non-standard hardware [ 35 ] . Wired USB hubs provide excellent performance but become unwieldy with extensive cabling that creates multiple points of failure. While a shared hardware bus offers a more robust foundation, the commonly used I 2 C protocol is severely constrained by a low data rate (up to 400 kbps) and susceptibility to EMI over long cable runs. In contrast, our shared SPI bus architecture provides a superior solution, offering a data rate over 100 times faster (42 Mbps) and with greater noise immunity, enabling a robust and scalable communication backbone for real-time control. This paper presents a complete, scalable solution for whole-body tactile sensing that addresses challenges at both the sensor and system level. Our main contributions

Read the complete text