Mathematical modelling of face coverings for virus protection
M. D. Shirley, I. M. Griffiths, J. Houghton, L. Hope, P. Hope, C. J. W. Breward · 2025
Read Mathematical modelling of face coverings for virus protection by M. D. Shirley, I. M. Griffiths, J. Houghton, L. Hope, P. Hope, C. J. W. Breward (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-20801.txt.
Introduction
Face cover flow is modeled by the authors in a 2025 arXiv paper, with Matthew D. Shirley as first author. Standard masks block breath, so virus-filled air leaks out the sides in a strong plume. A new shield uses a far more open cloth with an active coat, meant to let breath pass and trap virus. The team builds a math model of air and spray flow through a porous mask.
Slow-flow sums cut the model to one flux law across the mask face. Side leak and through flow trade off by cloth openness. Neck gaiters leaked less than masks in the runs. A best openness sits where real-world guard peaks.
Catalog record
| CREATOR | M. D. Shirley, I. M. Griffiths, J. Houghton, L. Hope, P. Hope, C. J. W. Breward |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 81 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-20801
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mathematical modelling of face coverings for virus protection M. D. Shirley, I. M. Griffiths, J. Houghton, L. Hope, P. Hope, C. J. W. Breward Abstract Traditional face masks used extensively, for example, during the COVID-19 pandemic, are relatively impermeable, forcing aerosol-containing breath to flow into the surrounding atmosphere by “leaking" out from the lateral edges of the mask. This protects close-proximity persons but results in a high viral load being delivered into the air. An alternative face covering, the Virustatic Shield ® {}^{\textrm{\textregistered}} , developed by Virustatic, involves a much more permeable material coated in an active agent, with the goal of increasing the transmission through the mask and thus reducing the viral load released. In this paper, we build and solve a model that describes the air flow and aerosol transport through a porous face mask. Our model for air flow is based on a low-Reynolds-number approximation to the Navier–Stokes equations, and reduces to a two-dimensional scalar partial differential equation for the local flux through the mask. We use the model to explore the interplay between leakage from the mask sides and flow directly through. We compare and contrast the leakage for traditional face masks and for neck gaiters, and find that neck gaiters have a lower leakage. We utilise a simple model for aerosol transport that balances advection with capture by the mask, and find that there is an ideal permeability, which optimises real-world protection offered by the mask. I Introduction During the COVID-19 pandemic, the use of face coverings greatly expanded Greenhalgh et al. 2024 and evidence shows that they reduced the spread of COVID-19 and other respiratory diseases Feng et al. 2020 ; Li et al. 2021 ; S. M. Tracht and Hyman 2010 . Face coverings may be broadly divided into three categories Schmitt and Wang 2022 . The highest protection is offered by respiratory protection devices (respirators), designed to provide a perfect seal between the covering and the face. Such devices are intended to protect the wearer from infection in high-risk environments such as COVID wards in hospitals, and require fit tests by each worker to ensure a particular design fits their face. Respirators are governed by regulations specifying a minimum filtration efficiency and a maximum allowed total inward leakage of air Schmitt and Wang 2022 ; Greenhalgh et al. 2024 . Surgical (or medical) face masks offer the next highest level of protection and are also subject to regulated standards. These masks were originally intended for source control of large droplets, and so no specification of the amount of either inward or outward leakage is given Schmitt and Wang 2022 ; Greenhalgh et al. 2024 . Finally, community face coverings (cloth masks, neck gaiters) grew in popularity in the wider population during the pandemic Greenhalgh et al. 2024 ; Schmitt and Wang 2022 ; Lindsley et al. 2021 . Regulations for community face coverings were introduced in 2020 due to the pandemic and are again primarily focused on source control, and to a lesser extent on the wearer’s protection Schmitt and Wang 2022 . However, evidence exists demonstrating that these masks leak a significant proportion of the exhaled air and particles Viola et al. 2021 ; O’Kelly et al. 2021 . There has been considerable interest in understanding and characterising the key factors in the design and use of face coverings to optimise the protection they offer to the wearer and others. To quantify the performance of face masks, studies have focused on four key metrics, two of which relate to the material and two to the real-world performance Mittal et al. 2023 . The properties of the mask material are measured by the permeability (often reported as the pressure drop), which quantifies the ability of air to flow through the mask material, and the filtration efficiency given by the proportion of particles entering the mask material that are captured. The real-world performance of face masks is quantified by the leakage ratio , \eta , the proportion of air exhaled that does not pass through the mask material, and the face-fitted filtration efficiency , \mathrm{FFE} , which is the proportion of exhaled particles captured by the face covering. Note that these definitions can be naturally altered to describe the amount of inward protection offered to the wearer, but we will focus on exhalation in this paper. The growth in popularity of community face coverings led to a great deal of innovation, for example, by Virustatic developing the Virustatic Shield {}^{\textrm{\textregistered}} . Virustatic’s aim was to design a face covering, based on a neck gaiter, which was more permeable than a traditional cloth mask, and made of a face conforming elastic material, with the aim of reducing the leakage. This ensures a greater proportion of exhaled air is filtered through the face covering, which is treated with an active coating to maintain a high filtration efficiency Medina-Magües et al. 2021 . However, as the regulations intended for surgical masks focus only on material properties, and do not account for leakage, there is no way for their design to progress up the regulatory pathway, despite aiming to offer better real-world protection than a traditional face mask. There have been a number of experimental studies on the effect of face coverings worn by human volunteers, including Viola et al. 2021 ; Bourrianne et al. 2021 who measured the effect of face masks on the distance jets of air travel from the wearer during talking, breathing, and coughing. The measurements presented in Bourrianne et al. 2021 indicate that the velocity of air just as it leaks out the top of the mask is 0.1\text{\,}\mathrm{m}\,\mathrm{s}^{-1} during normal respiration. In Duncan et al. 2021 , direct measurements of the filtration efficiency and inward face-fitted filtration efficiency of coverings are presented for reusable fabric masks and disposable surgical and N95 masks. They find a variation in the filtration efficiency between the different materials, and that ensuring an effective seal to minimise leakage has a much greater effect on protecting the wearer than the material choice. Other papers Si et al. 2024 ; Pan et al. 2021 ; Lindsley et al. 2021 ; Kolewe et al. 2020 ; Chiera et al. 2022 have focused on using headforms to improve reproducibility. Schlieren imaging is used in Si et al. 2024 to visualise the jets from headforms wearing face coverings to identify where leakage occurs and see the main leakage jets out of the top and sides of the mask. The filtration efficiency and inward and outward face-fitted filtration efficiencies of eleven different face coverings worn on a mannequin were measured in Pan et al. 2021 . They found the difference between the material and face-fitted value was greatest for loose-fitting coverings. In Lindsley et al. 2021 , the outwards face-fitted efficiency during a simulated coughing cycle was measured for a variety of face masks, a neck gaiter, and a face shield worn by a mannequin. They found no significant statistical difference between a cloth mask, a surgical mask, and a neck gaiter, but all performed significantly better than the face shield. In Kolewe et al. 2020 , a headform was also used to measure the aerosol concentration for a surgical mask, an