Measurement of the differential and total cross-sections of γ \gamma -ray emission induced by 14.1 14.1 MeV neutrons for C, Al, Si, Ca, Ti, Cr, and Fe using the tagged neutron method

Prusachenko P.S. a;1), Grozdanov D.N. a,b, Fedorov N.A. a, Kopatch Yu.N. a, Pampushik G.V. a,c, Kharlamov P.I. a,c,d, Skoy V.R. a, Ruskov I.N. a,b, Tretyakova T.Yu. a,c,d, Andreev A.V. a,c, Hramco C. a, Filonchik P.G. a,e, and TANGRA collaboration · 2025

Read Measurement of the differential and total cross-sections of γ \gamma -ray emission induced by 14.1 14.1 MeV neutrons for C, Al, Si, Ca, Ti, Cr, and Fe using the tagged neutron method by Prusachenko P.S. a;1), Grozdanov D.N. a,b, Fedorov N.A. a, Kopatch Yu.N. a, Pampushik G.V. a,c, Kharlamov P.I. a,c,d, Skoy V.R. a, Ruskov I.N. a,b, Tretyakova T.Yu. a,c,d, Andreev A.V. a,c, Hramco C. a, Filonchik P.G. a,e, and TANGRA collaboration (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-19925.txt.

Introduction

Prusachenko and co-authors, with the TANGRA team, measure gamma rays given off when fast neutrons strike seven common elements. The elements run from carbon and aluminum to iron. Knowing how often each ray comes out, and at what angle, feeds nuclear data used in science and industry.

The team used tagged neutrons, whose paths are tracked, and four detectors set at set angles. That setup yielded values at many angles for dozens of gamma lines in total. Careful corrections covered stray neutrons and lost rays, checked with extra runs. Adding up the angle patterns gave total rates for each line, with a total error near nine percent.

Catalog record

CREATORPrusachenko P.S. a;1), Grozdanov D.N. a,b, Fedorov N.A. a, Kopatch Yu.N. a, Pampushik G.V. a,c, Kharlamov P.I. a,c,d, Skoy V.R. a, Ruskov I.N. a,b, Tretyakova T.Yu. a,c,d, Andreev A.V. a,c, Hramco C. a, Filonchik P.G. a,e, and TANGRA collaboration
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE60 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-19925

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Measurement of the differential and total cross-sections of γ \gamma -ray emission induced by 14.1 14.1 MeV neutrons for C, Al, Si, Ca, Ti, Cr, and Fe using the tagged neutron method Thanks: This work was supported by a RSF grant No.23-12-00239 Prusachenko P.S. a;1), Grozdanov D.N. a,b, Fedorov N.A. a, Kopatch Yu.N. a, Pampushik G.V. a,c, Kharlamov P.I. a,c,d, Skoy V.R. a, Ruskov I.N. a,b, Tretyakova T.Yu. a,c,d, Andreev A.V. a,c, Hramco C. a, Filonchik P.G. a,e, and TANGRA collaboration Abstract In this work, differential cross sections of γ \gamma -ray emission produced in nuclear reactions induced by 14.1 14.1 MeV neutrons are measured for the 4.439 4.439 MeV line from carbon, as well as for 10 10 individual γ \gamma -ray lines from aluminum, 6 6 from silicon, 8 8 from calcium, 16 16 from titanium, 6 6 from chromium, and 14 14 from iron. The measurements were conducted using the tagged neutron method with four LaBr 3 (Ce) scintillation detectors positioned at angles of 25 ∘ 25^{\circ} , 45 ∘ 45^{\circ} , 60 ∘ 60^{\circ} , and 70 ∘ 70^{\circ} relative to the generator target – sample center axis. A neutron generator capable of producing 16 16 separate beams of tagged neutrons was employed, which, combined with the detector system, enabled the determination of differential cross-sections for 64 64 distinct angle values in the range of 17 ∘ 17^{\circ} to 89 ∘ 89^{\circ} . To simplify data visualization, the angular distributions were divided into 5 ∘ 5^{\circ} intervals, with weighted mean values of the angle and differential cross-section calculated for each interval. Corrections for multiple neutron scattering and attenuation, γ \gamma -ray attenuation, and total detection efficiency, computed using GEANT4, were accounted for in the cross-section calculations. Additional measurements were performed to validate the correction calculations. The total γ \gamma -ray emission cross-sections were obtained by approximating the angular distributions with even-order Legendre polynomial expansions up to the 6 6 th degree, followed by integration over the full solid angle. The total systematic error for the obtained data was estimated as 9 9 %. 0 0 footnotetext: Received August 10, 2026 keywords tagged neutron method, differential and total \gamma -ray production cross sections, 14.1 MeV neutrons pacs 2 5.40, 28.20, 29.25 0 0 footnotetext: \scriptstyle\copyright 2013 Chinese Physical Society and the Institute of High Energy Physics of the Chinese Academy of Sciences and the Institute of Modern Physics of the Chinese Academy of Sciences and IOP Publishing Ltd 1 Introduction The study of characteristic \gamma -ray emission in nuclear reactions induced by fast neutrons is of significant interest for a range of fundamental and applied problems. In particular, it provides additional information about nuclear structure and the probability of exciting specific nuclear states. Spectroscopy of characteristic \gamma -rays emitted in reactions induced by fast neutrons (most commonly with energies around 14 MeV) is frequently used to investigate the elemental composition of various materials [ 2 ] . However, it is noted that the accuracy of existing experimental and evaluated data on \gamma -ray emission under fast neutron irrays requires substantial improvement to meet modern demands and support emerging fields such as planetary nuclear spectroscopy. The TANGRA (TAgged Neutrons and Gamma-RAys) project at the Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research (JINR) [ 3 , 4 ] , employs the tagged neutron method (TNM) [ 5 ] to address current fundamental and applied challenges [ 6 ] . The tagged neutron method offers a simple and cost-effective alternative to pulsed neutron generators while retaining many of their advantages (e.g., time-of-flight background suppression, compactness, etc.). Due to these benefits, TNM has been applied to various practical problems, including geology [ 7 ] , metallurgy [ 8 ] , and hazardous material detection [ 9 ] . To enhance the accuracy of analysis and expand its applications, the TANGRA project is conducting a large-scale study of angular distributions and cross-sections for characteristic \gamma -ray emission induced by 14.1 MeV neutrons across a wide range of elements [ 10 , 11 , 12 , 13 , 14 , 15 ] . Among the elements of particular interest are carbon, aluminum, silicon, calcium, titanium, chromium, and iron, which are major constituents of many geological materials and some hazardous substances. Currently, a considerable amount of experimental data exists for these elements at neutron energies near 14 MeV, particularly for carbon [ 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 ] , aluminum [ 16 , 25 , 29 , 32 , 39 , 41 , 42 , 43 , 44 , 45 , 46 , 47 , 48 , 49 ] , silicon [ 28 , 44 , 49 , 50 , 51 , 52 , 53 , 54 , 55 , 56 , 57 , 58 ] , calcium [ 20 ] , titanium [ 20 , 32 , 52 , 53 , 54 , 59 , 60 , 61 , 62 , 63 , 64 ] , chromium [ 41 , 52 , 59 , 60 , 65 , 66 , 67 , 68 , 69 , 70 ] , and iron [ 27 , 31 , 48 , 49 , 52 , 54 , 59 , 65 , 68 , 71 , 72 , 73 , 74 , 75 , 76 , 77 , 78 , 79 , 80 , 81 , 82 , 83 , 84 , 85 , 86 ] . Despite the impressive number of studies, one of the major issues is the fragmented and insufficient data on angular distributions of \gamma -rays emitted in neutron-induced reactions. According to Simakov’s compilation [ 87 ] , which provides a detailed review of experimental data available up to 1998 (see Table 3 in [ 87 ] ), most measurements were performed for only 1-2 angular points, making it impossible to accurately assess \gamma -ray emission anisotropy or reliably estimate total cross-sections. Additionally, many studies lack detailed descriptions of experimental setups and data correction methodologies, complicating efforts to resolve discrepancies in reported cross-sections. Some recent studies, such as those conducted at the GAINS setup in GELINA [ 57 , 64 , 81 ] , provide thorough descriptions of experimental procedures and data analysis. However, their limitations include a narrow selection of studied elements and the absence of angular distribution measurements. The objective of this research was to perform more precise and detailed measurements of differential \gamma -ray emission cross-sections for the most intense transitions in carbon, aluminum, silicon, calcium, titanium, chromium, and iron nuclei under irrays by 14.1 MeV neutrons, followed by the determination of total cross-sections. The detector and sample geometry, as well as sample dimensions, were optimized to minimize systematic uncertainties, such as multiple scattering, \gamma -ray attenuation, and incomplete sample coverage by tagged neutron beams. 2 Experiment The tagged neutron method is based on the detection of secondary \alpha -particles accompanying neutron emission in the 3 H (d,n)^{4} He fusion reaction using a

Read the complete text