Experimental End-to-End Optimization of Directly Modulated Laser-based IM/DD Transmission

Sergio Hernandez, Christophe Peucheret, Francesco Da Ros, Darko Zibar · 2025

Read Experimental End-to-End Optimization of Directly Modulated Laser-based IM/DD Transmission by Sergio Hernandez, Christophe Peucheret, Francesco Da Ros, Darko Zibar (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-19910.txt.

Introduction

Lasers modulated directly by the signal are cheap and simple for short data links, but their messy physics makes tuning hard. Sergio Hernandez and co-authors let the hardware teach its own model. They train a stand-in model on real measurements from the lab setup, then optimize the whole chain against it.

The tuning covers pulse shaping, equalizer filters, laser bias current, and radio power all at once. On the bench, the tuned system beat four rival schemes across speeds and distances. It did so with lower radio power, fewer filter taps, and less signal bandwidth. The 2025 paper shows end-to-end learning squeezing more from humble lasers.

Catalog record

CREATORSergio Hernandez, Christophe Peucheret, Francesco Da Ros, Darko Zibar
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE41 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-19910

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Experimental End-to-End Optimization of Directly Modulated Laser-based IM/DD Transmission Sergio Hernandez, Christophe Peucheret, Francesco Da Ros, Darko Zibar Abstract Directly modulated lasers (DMLs) are an attractive technology for short-reach intensity modulation and direct detection communication systems. However, their complex nonlinear dynamics make the modeling and optimization of DML-based systems challenging. In this paper, we study the end-to-end optimization of DML-based systems based on a data-driven surrogate model trained on experimental data. The end-to-end optimization includes the pulse shaping and equalizer filters, the bias current and the modulation radio-frequency (RF) power applied to the laser. The performance of the end-to-end optimization scheme is tested on the experimental setup and compared to 4 different benchmark schemes based on linear and nonlinear receiver-side equalization. The results show that the proposed end-to-end scheme is able to deliver better performance throughout the studied symbol rates and transmission distances while employing lower modulation RF power, fewer filter taps and utilizing a smaller signal bandwidth. I Introduction The explosive growth of internet services and data traffic, driven by the surge in cloud computing and artificial intelligence (AI) applications, is placing considerable pressure on the global communications infrastructure [ 1 ] . Specifically, short-reach intra-data center interconnects must continue to increase data throughput while maintaining low costs. Intensity modulation and direct detection (IM/DD) is the dominating technology for such interconnects [ 2 , 3 , 4 ] . Directly modulated lasers (DMLs) are an attractive technology for short-reach IM/DD optical links, offering low energy consumption, compact size, and affordability [ 5 , 6 , 7 , 8 , 9 , 10 ] . This makes them well-suited for communication systems demanding high data rates at minimal cost. DMLs are simpler and potentially more efficient than alternative transmitter technologies [ 9 ] . However, the limited modulation bandwidth of DMLs can restrict their achievable symbol rates [ 11 , 12 , 13 ] . The interaction between modulation-induced frequency chirp and chromatic dispersion (CD) is also among the main limiting factors in the implementation of DML-based IM/DD systems [ 2 ] . As throughput requirements increase beyond 100 Gbps per lane [ 2 ] , these limitations become more challenging. Operating DMLs at symbol rates beyond 50 GBd, necessary for high data throughput, can introduce impairments such as nonlinear waveform distortion and more severe frequency chirping [ 14 , 15 , 16 ] . These impairments can reduce the effective signal-to-noise ratio (SNR) of the signal at the receiving end, limiting transmission distance and achievable data rates. Traditionally, digital signal processing (DSP) techniques for mitigating impairments in DML-based systems have focused on receiver-side equalization (EQ) or a combination of digital pre-distortion (DPD) at the transmitter and EQ at the receiver [ 17 , 18 , 2 , 13 , 19 , 5 ] . These approaches optimize only one end of the system at a time and thus they may lead to suboptimal solutions compared to joint optimization techniques [ 20 ] . End-to-end (E2E) learning [ 21 , 22 , 23 , 24 ] offers a promising approach to jointly optimizing the transmitter and receiver, potentially leading to optimal DSP configurations in terms of signal quality and power consumption. E2E learning in communication systems involves representing the transmitter and receiver as a single autoencoder (AE) artificial neural network (ANN) built around the transmission channel [ 25 , 26 ] . This approach allows for the simultaneous optimization of the DSP at the transmitter (constellation shaping, pulse shaping, DPD) and receiver (EQ, symbol detection) while keeping the parameters of the channel model fixed. Applying E2E learning to DML-based systems is hindered by the physical model of the laser [ 27 , 25 , 28 ] . The DML large-signal dynamics are governed by nonlinear laser rate equations [ 29 ] , which describe the interplay between carrier density and photon density in the cavity. These equations lack a closed-form large-signal solution, requiring the use of iterative numerical solvers to simulate the DML’s output. This simulation step is not directly differentiable, which prevents the backpropagation of gradients from the receiver to the transmitter and stalls the training process [ 30 , 10 ] . Data-driven surrogate models based on machine learning offer a solution to the differentiability challenge posed by DMLs [ 24 ] . These models learn a differentiable representation of the DML dynamics based on input/output sequences. Data-driven models create a viable, differentiable pathway for backpropagation where analytical models fall short, unlocking the potential of end-to-end, gradient-based optimization for DML-based systems. Data-driven models can also be faster substitutes for computationally expensive ordinary differential equation (ODE) solvers [ 31 ] and derivative-free gradient approximators in parameter optimization [ 32 ] . Based on the gradients provided by the differentiable surrogate model, E2E learning allows the joint optimization of an arbitrarily large space of parameters that affect the performance of the system. In this paper, we demonstrate the surrogate-based E2E optimization of transmitter (TX) and receiver (RX) DSP and laser driving configurations over different lengths of standard single mode fiber (SSMF). The proposed data-driven surrogate model is trained to capture the chirp-CD interaction along the different fiber lengths, allowing the E2E optimization to mitigate its impact on performance. This is done by training a separate model for each transmission distance and baudrate. Our approach allows the E2E system to optimize the DSP (constellation shaping, pulse shaping, EQ and symbol detection) and laser-driving configurations (bias and modulation RF power) for every scenario. Thus, we extend our previous work in [ 33 ] , showing the surrogate-based E2E optimization of TX and RX DSP and laser-driving configurations in a back-to-back (B2B) scenario. The proposed E2E system is benchmarked experimentally against two more traditional RX-side equalization based on root-raised cosine (RRC) pulse-shaped signals. The two RRC-shaped benchmark equalization strategies are based on (1) a linear (finite impulse response, FIR) and (2) a nonlinear (2 nd order Volterra series, VNLE) equalizer to test the E2E system performance against both linear and nonlinear receiver-side equalization. We demonstrate, for the first time to our knowledge, the joint optimization of DSP and laser driving configurations in an experimental transmission setting. The E2E system achieves better error performance and eye opening than RX equalization across the studied fiber lengths. This improvement is realized while utilizing less bandwidth and employing lower modulation RF power and fewer filter taps than the RX-side equalization benchmarks. The rest of the paper is structured as follows. section II describes the characteristics of the utilized DML. section III explains the methodology to build the surrogate model of the laser. section IV describes how the system parameters are optimized once the surrogate model is trained. section V shows the experimental results of the E2E and benchmark setups in terms of symbol error rate (SER), eye diagrams and RX-side signal spectra. The results are summarized in section VI . Fig. 1: a) Measured light-current (L-I) curve and b) small-signal modulation response H(f) of the utilized NEL NLK1551SSC DML. II DML characteristics The characteristics of the laser play an important role in the error performance of DML-based IM/DD links, primarily due to the laser’s strong nonlinear dynamics, limited bandwidth, and significant frequency chirping. The utilized NEL NLK1551SSC

Read the complete text