Arbitrary Precision Printed Ternary Neural Networks with Holistic Evolutionary Approximation

Vojtech Mrazek, Konstantinos Balaskas, Paula Carolina Lozano Duarte, Zdenek Vasicek · 2025

Read Arbitrary Precision Printed Ternary Neural Networks with Holistic Evolutionary Approximation by Vojtech Mrazek, Konstantinos Balaskas, Paula Carolina Lozano Duarte, Zdenek Vasicek (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-19660.txt.

Introduction

Printed electronics trade silicon's precision for flexibility and pennies-per-device cost, but their coarse features make neural networks hard to fit. Vojtech Mrazek and co-authors built an automated framework that designs printed ternary networks at any input precision. It co-optimizes the whole chain, from the analog-to-digital converter, a notorious area and power hog, through to the classifier itself.

The search uses multi-objective optimization and approximation at every level at once, rather than shrinking parts one at a time. On average their circuits beat earlier approximate printed networks seventeenfold in area and fifty-ninefold in power, with under five percent accuracy lost. The headline claim is a threshold crossed: for the first time, such a network can run off a printed battery, converter costs included.

Catalog record

CREATORVojtech Mrazek, Konstantinos Balaskas, Paula Carolina Lozano Duarte, Zdenek Vasicek
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE65 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-19660

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Arbitrary Precision Printed Ternary Neural Networks with Holistic Evolutionary Approximation Thanks: Manuscript received March 6, 2025, revised July 17, 2025 , accepted August 20, 2025. ( Corresponding author: V. Mrazek, e-mail: [email protected] ). Thanks: This work was supported by the Czech Science Foundation project 25-15490S, by the European Research Council (ERC, Grant No. 101052764), and by the H.F.R.I call “Basic research Financing (Horizontal support of all Sciences)” under the National Recovery and Resilience Plan “Greece 2.0” (H.F.R.I. Project Number: 17048). Thanks: V. Mrazek and Z. Vasicek are with the Faculty of Information Technology, Brno University of Technology, 612 00 Brno, Czech Republic Thanks: P. C. Lozano Duarte and M. B. Tahoori are with the Department of Computer Science, Karlsruhe Institute of Technology, Karlsruhe 76131, Germany Thanks: K. Balaskas and G. Zervakis are with the Computer Engineering & Informatics Dept., University of Patras, Patras 26504, Greece. Vojtech Mrazek, Konstantinos Balaskas, Paula Carolina Lozano Duarte, Zdenek Vasicek Abstract Printed electronics offer a promising alternative for applications beyond silicon-based systems, requiring properties like flexibility, stretchability, conformality, and ultra-low fabrication costs. Despite the large feature sizes in printed electronics, printed neural networks have attracted attention for meeting target application requirements, though realizing complex circuits remains challenging. This work bridges the gap between classification accuracy and area efficiency in printed neural networks, covering the entire processing-near-sensor system design and co-optimization from the analog-to-digital interface–a major area and power bottleneck–to the digital classifier. We propose an automated framework for designing printed Ternary Neural Networks with arbitrary input precision, utilizing multi-objective optimization and holistic approximation. Our circuits outperform existing approximate printed neural networks by 17x in area and 59x in power on average, being the first to enable printed-battery-powered operation with under 5% accuracy loss while accounting for analog-to-digital interfacing costs. I Introduction Over the past several decades, the Very-Large-Scale Integration (VLSI) circuit industry has managed to fuel Moore’s law, and feature scaling is expected to persist for the next ten years and beyond [ 1 ] . The common theme among these technological innovations is the never-ending pursuit of improving the power-performance-area (PPA) of transistors, and silicon-based systems overall. However, numerous application domains fall outside the PPA target, including forensics [ 2 ] , disposables and smart packaging [ 3 , 4 ] , accessible healthcare products and wearables [ 5 , 6 , 7 , 8 ] , and the ten trillion-dollar fast-moving consumer goods market [ 9 ] . Such applications require ultra-low-cost fabrication, along with stretchability, porosity, flexibility, and conformality —demands that rigid silicon systems cannot meet, positioning printed electronics at the forefront for integrating smart services in these domains that have yet to witness significant computing infiltration. Printed electronics use mask-less, additive methods like jet, screen, or gravure printing, achieving ultra-low cost (even sub-cent) and fast-turnaround fabrication [ 10 , 11 ] (see Section II-A for more information). Coupled with low capital equipment costs, printed electronics enable rapid and inexpensive manufacturing. On the other hand, the low-resolution printing results in large feature sizes, low integration density, and high device latencies [ 12 , 13 ] . These limitations pose challenges for implementing printed Machine Learning (ML) classifiers (i.e., complex datapaths with increased gate count) , but are essential for numerous applications in the aforementioned domains [ 14 ] . These applications frequently involve classifying analog sensor data to derive meaningful insights. Extensive research has been dedicated to printed neural networks [ 14 , 15 , 16 , 17 , 18 , 19 , 20 ] . To address the inherent limitations of printed electronics—particularly in terms of area and power—two main design paradigms gain interest in printed ML: bespoke [ 21 ] and approximate [ 22 ] . Bespoke design involves fully customized circuits tailored to each ML model and dataset. This is enabled by the ultra-low fabrication and non-recurring engineering (NRE) costs of printed electronics, achieved by hardwiring model parameters into the circuit. Such a level of customization is unattainable in silicon-based systems. Efficiency can be further enhanced by leveraging the error resilience of ML applications and employing approximate computing [ 23 ] . Printed electronics and ML synergistically act as enablers for approximate computing, and vice versa. Printed electronics are subject to strict physical constraints, such as tight area limits and restricted power availability, and can integrate only a very limited number of devices. The problem is exacerbated when ML circuits are considered, which inherently have significant hardware overheads. Approximation techniques that aggressively reduce the gate count are favored to enable practical implementations and deliver ultra-area-efficient solutions. On the other hand, extensive research in approximate computing emerged about fifteen years ago, but it saw limited adoption in real-world applications. This is largely due to the poor generalization of approximate circuits and the high fabrication costs of silicon systems, which discourage designers from creating systems prone to often significant or unforeseen errors or incurring the additional costs of verifying approximate designs. In contrast, as aforementioned, printed electronics offer negligible fabrication costs, fast on-field manufacturing, and a typically short circuit lifespan—often just up to a few days. These advantages empower designers to experiment with and adopt unconventional computing paradigms, such as approximate computing. This is because, unlike traditional silicon systems where errors can lead to costly failures and re-fabrication, the low-risk context of printed circuits makes approximation-induced inaccuracies far more acceptable. Additionally, bespoke design in printed electronics enables ML circuit-specific approximations, addressing the generalization challenge of approximate circuits and maximizing hardware savings. Finally, the relatively low complexity of target printed ML applications makes the corresponding circuits even more resilient to errors [ 24 ] , enabling more aggressive approximations and enhancing the applicability and benefits of approximate computing. In this work, we focus on designing digital approximate printed neural networks using Electrolyte-Gated FET (EGFET) technology [ 9 ] , which offers good mobility characteristics and enables operation at low supply voltages [ 25 ] , making it ideal for printed battery-powered applications. Recognizing the prohibitive cost of printed multipliers [ 16 , 17 ] , the state of the art has shifted to multiplier-less networks, such as power-of-2 quantized Multilayer Perceptrons (MLPs) [ 18 , 19 ] or Ternary Neural Networks (TNNs) [ 20 ] . This allows bespoke circuit implementations to use only adders/subtractors and re-wiring for shift operations. However, [ 16 , 17 , 18 , 19 ] require higher precision inputs to maintain acceptable accuracy, overlooking the often dominant overheads of necessary analog-to-digital converters (ADCs) to process sensor data [ 26 , 27 ] . Using 1 -bit inputs and simpler analog-to-binary converters (ABCs), in [ 20 ] , we avoided interfacing costs. Existing approximate printed neural networks offer non-favorable accuracy-area trade-offs. The MLPs in [ 16 , 17 ] offer low accuracy loss (e.g., 1 - 2 %) but yield mainly modest hardware savings, with poor scalability for larger losses, while the multiplier-less 1 -bit TNNs [ 20 ] and power-of-2 MLPs [ 18 , 19 ] often suffer from high accuracy loss (e.g., >5 %). This paper extends our prior work in [ 20 ] and addresses the limitations mentioned above by co-optimizing the analog frontend (i.e., ADC) and digital classifier logic, proposing an automated framework for

Read the complete text