Time Domain Design of a Josephson Parametric Amplifier and Comparison with Input–Output Theory

Emre Küçükyılmaz, Mehmet Ünlü, Ali Bozbey · 2025

Read Time Domain Design of a Josephson Parametric Amplifier and Comparison with Input–Output Theory by Emre Küçükyılmaz, Mehmet Ünlü, Ali Bozbey (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-18396.txt.

Introduction

Emre Küçükyılmaz, Mehmet Ünlü, and Ali Bozbey published this study in 2025. It offers a new way to design Josephson parametric amplifiers. These devices boost the faint microwave signals from qubits, and they must add almost no noise. Their gain comes from the nonlinear behavior of Josephson junctions. Standard design leans on quantum input-output theory, which is slow to work with.

The team instead models the amplifier as an ordinary circuit and runs it in open-source circuit simulators. They then compare the answers with the quantum theory's results. The match supports the circuit route. Circuit optimizers can then chase design goals directly, cutting design time a great deal. The authors pitch the method as a practical shortcut for quantum hardware engineers.

Catalog record

CREATOREmre Küçükyılmaz, Mehmet Ünlü, Ali Bozbey
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-18396

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Time Domain Design of a Josephson Parametric Amplifier and Comparison with Input–Output Theory Emre Küçükyılmaz, Mehmet Ünlü, Ali Bozbey Abstract Quantum-limited amplifiers, such as Josephson Traveling Wave Parametric Amplifiers (JTWPAs) and Josephson Parametric Amplifiers (JPAs), are essential components in quantum computers. They amplify low-power microwave signals from qubits at the 10 mK stage before further amplification at the 4 K stage using HEMT amplifiers. In JPAs, parametric amplification is based on the nonlinear properties of Josephson Junctions. While JPAs are typically designed and analyzed using input-output theory based on quantum physics, we propose an alternative approach based on an equivalent circuit model of JPAs, implemented using open-source Josephson circuit simulators. We compare the results with those obtained from input-output theory. This method enables the use of circuit optimizers for various objective functions and significantly reduces design time compared to quantum theory-based approaches. I Introduction In the literature, Josephson parametric amplifiers have been extensively investigated [ 1 , 2 , 3 , 4 , 5 ] . They are used as quantum limited amplifiers or as a non-classical light source and have multiple modes of operation such as degenerate, non-degenerate, or 4 wave mixing and 3 wave mixing modes [ 6 , 7 , 8 ] . Although they are characterized as weakly nonlinear quantum harmonic oscillators rather than strongly nonlinear qubits, they essentially resemble the same architecture [ 9 ] . Input-output theory, a widely used framework in quantum optics, models the dissipative interaction of the cavity with its surrounding environment, which is treated as a set of independent harmonic oscillators [ 10 ] . This approach operates in the Heisenberg picture, enabling the derivation of equations of motion for the intra-cavity field. These can then be related to the input and output fields via boundary conditions. The formalism remains accurate even in the presence of coupled or complex cavity configurations [ 11 , 12 ] . Interestingly, the semi-classical approach used in the analysis naturally lends itself to implementation with circuit simulators [ 13 ] . In this work, we use open source Josephson circuit simulators such as Jsim and JoSIM [ 14 , 15 ] to characterize the device and compare the results with linearized and generalized quantum treatment.We also derive the equation of motion for JPA flux and compute it in Matlab to demonstrate the agreement between two different numerical method-based solvers.In the literature, Josephson circuit simulators are widely recognized within the digital design community [ 16 , 17 , 18 , 19 , 20 , 21 , 22 ] . However, RF behavior can also be analyzed using circuit simulators, as RF circuits can be accurately represented with lumped element models when modeled correctly. Motivated by this, we anticipate that quantum engineers will integrate time-domain Josephson simulators into their design workflow, simplifying and improving their methodology while advancing the development of scalable quantum computers. II JPA Design Based on Input–Output Theory To derive a Hamiltonian of an arbitrary circuit, we follow the steps explained in [ 23 ] . We represent the JPA as a parallel non-linear LC circuit and use the highlighted capacitive spanning tree to derive the Hamiltonian of the circuit given in figure 1 to derive the associated Hamiltonian as in equation ( 1 ). Fig. 1 : Circuit considered for quantization \mathcal{H}=\frac{C}{2}\dot{\Phi}^{2}-E_{J}\cos\left(\frac{2\pi}{\Phi_{0}}(\Phi-\Phi_{\text{ext}})\right) (1) Where, \Phi is the flux, \Phi_{0} is the single flux quantum, \Phi_{ext} is the external flux, E_{J} is the Josephson energy. In the equation, 1^{st} term represents the energy associated with the capacitor, C , and 2^{nd} term represents the energy associated with the nonlinear inductor implemented by a Josepshon junction. And because single junction potential is symmetric, RF driving the circuit is enough to induce the 4 wave mixing process without triggering any 3 wave mixing process which makes it convenient to drop the external flux dependence. In this case, one obtains the Hamiltonian given in equation ( 2 ). \mathcal{H}=\frac{C}{2}\dot{\hat{\Phi}}^{2}-E_{J}\cos\left(\frac{2\pi}{\Phi_{0}}\hat{\Phi}\right) (2) This Hamiltonian can be quantized using Dirac’s method. First, we introduce flux ( \hat{\Phi} ) and charge operators ( \hat{Q} ): \displaystyle\text{(a)} \displaystyle\hat{\Phi}=\Phi_{\text{zpf}}(\hat{a}^{\dagger}+\hat{a})=\sqrt{\frac{\hbar Z_{0}}{2}}(\hat{a}^{\dagger}+\hat{a}), (3) \displaystyle\text{(b)} \displaystyle\hat{Q}=iQ_{\text{zpf}}(\hat{a}^{\dagger}-\hat{a})=i\sqrt{\frac{\hbar}{2Z_{0}}}(\hat{a}^{\dagger}-\hat{a}). Where \hat{\Phi}_{zpf} and \hat{Q}_{zpf} represent the zero-point fluctuations of the flux and change. The ladder operators \hat{a} and \hat{a}^{\dagger} satisfy the usual bosonic commutation relation, [\hat{a},\hat{a}^{\dagger}]=1 and the canonical conjugate variables \hat{\Phi} and \hat{Q} satisfy the commutation relation [\hat{\Phi},\hat{Q}]=i\hbar . If we expand the cosine term in equation ( 2 ) and apply a rotating wave approximation assuming that the rotating terms do not have strong influence on the system, we obtain: \displaystyle\mathcal{H}=\frac{\hat{Q}^{2}}{2C_{\text{}}}+\frac{\hat{\Phi}^{2}}{2L_{J}}-\frac{E^{\prime}_{J}}{4!}\left(\frac{2\pi\hat{\Phi}}{\Phi_{0}}\right)^{4}+O\left(\left(\frac{2\pi\hat{\Phi}}{\Phi_{0}}\right)^{6}\right) (4) Where L_{J} is the Josephson inductance. Substituting \hat{\Phi} and \hat{Q} in equation ( 4 ) we obtain the so-called second quantization form as follows: \displaystyle\mathcal{H}^{\text{RWA}}=\hbar\tilde{\omega}_{0}\hat{a}^{\dagger}\hat{a}+\frac{K}{2}\hat{a}^{\dagger}\hat{a}^{\dagger}\hat{a}\hat{a} (5) Where \tilde{\omega}_{0}=\omega_{0}+K is the shifted frequency arising from zero-point fluctuations (ZPF). From the second quantized Hamiltonian obtained at equation 5 , one can use the Heisenberg equation of motion (HEOM) to derive the quantum Langevin equation ( 6 ), [ 24 ] . \displaystyle\dot{A}=-i\tilde{\omega}_{0}A-iKA^{\dagger}AA-(\gamma_{1}+\gamma_{2})A (6) \displaystyle+\sqrt{2\gamma_{1}}a_{\text{in}}(t)+\sqrt{2\gamma_{2}}b_{\text{in}}(t) Here, the operators A , a_{\text{in}} , and b_{\text{in}} represent the resonator, the input signal, and the input noise modes, respectively. Here, the signal and noise linewidths ( \gamma_{1} and \gamma_{2} respectively) are defined as half width at half maximum. Considering only the pump input and neglecting any signal input for equation ( 6 ), In steady state i.e ( \dot{A} =0) we obtain equation ( 7 ). \displaystyle K^{2}N^{3} \displaystyle+2(\omega_{0}-\omega_{p})KN^{2} (7) \displaystyle+\left[(\omega_{0}-\omega_{p})^{2}+(\gamma_{1}+\gamma_{2})^{2}\right]N=2\gamma_{1}p_{\mathrm{in}}^{2} As this equation accounts solely for the presence of the pump wave, N represents the number of pump photons confined within the cavity. This parameter is crucial, as it is the pump wave that initiates and sustains the parametric amplification process. Symbol p_{in} is pump power. Since this equation is a cubic equation in N, it has multiple real solutions for certain drive powers. Some solutions may be in the bistable regime, which is known as the bifurcation regime, and has been treated in the literature [ 25 , 26 ] . Fig. 2 : Normalized photon number (n) vs. normalized pump detuning ( \delta ) for various drive powers. n = N / (p_{in})^{2}\frac{\gamma_{1}}{(\gamma_{1}+\gamma_{2})^{2}} and \delta = \omega_{0} - \omega_{p} . To plot the p_{in}>p_{crit} case, we used arc-length method [ 27 ] . JPA enters the bistable regime as the pump power increases larger than the critical value of the pump power ( p_{crit} ) as shown in the figure 2 . For JPA to operate correctly, p_{in}<p_{crit} should be satisfied. We can define the incoming field a_{in}(t) [or intracavity field A(t) ] as two separate waves which are composed of pump and signal with the pump coefficient p_{in} [or p ] being constant and real valued and the signal coefficient c_{in}(t) [or c(t) ] being time dependent and complex valued. \displaystyle a_{\text{in}}(t)=\begin{bmatrix}p_{in}e^{-i(\omega_{p}t+\phi_{p})}&c_{\text{in}}(t)e^{-i\omega_{p}t}\end{bmatrix} (8) \displaystyle A(t)=\begin{bmatrix}pe^{-i(\omega_{p}t+\phi_{p})}&c(t)e^{-i\omega_{p}t}\end{bmatrix} (9) After determining the pump photon number in the steady state, one can solve the QLE equation ( 6 ) by substituting equations ( 8 ) and ( 9 ) in the presence of a weak signal tone c_{in} and we arrive at the equation of motion for the signal field in the time domain: \displaystyle-i\omega_{p}c(t)+\frac{dc}{dt}=-i\omega_{0}c(t)-iK\left(c^{\dagger}(t)Ne^{-2i\psi_{B}}+2c(t)N\right) (10) \displaystyle-\sqrt{2\gamma_{1}}c_{in}(t)-(\gamma_{1}+\gamma_{2})c(t) Equation ( 10 ) can be solved using numerical methods, or as an integral

Read the complete text