TSPC-PFD: TSPC-Based Low-Power High-Resolution CMOS Phase Frequency Detector
Dhandeep Challagundla 1 , Venkata Krishna Vamsi Sundarapu 1 , Ignatius Bezzam 2 , Riadul Islam 1 · 2025
Read TSPC-PFD: TSPC-Based Low-Power High-Resolution CMOS Phase Frequency Detector by Dhandeep Challagundla 1 , Venkata Krishna Vamsi Sundarapu 1 , Ignatius Bezzam 2 , Riadul Islam 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-16933.txt.
Introduction
Dhandeep Challagundla and co-authors design a low-power chip part for clock circuits in a 2025 paper. Phase frequency detectors compare two signals and steer a loop that keeps clocks in sync. Classic designs suffer dead and blind zones, gaps where small differences go unseen, which add jitter at high speed.
Their design uses a single-phase clock logic style to remove the blind zone entirely. The remaining dead zone shrinks to forty picoseconds. Built in a 28-nanometre process, the part used only a few microwatts at three gigahertz. Its layout area was also tiny. The authors present it as a fit for fast, power-tight systems.
Catalog record
| CREATOR | Dhandeep Challagundla 1 , Venkata Krishna Vamsi Sundarapu 1 , Ignatius Bezzam 2 , Riadul Islam 1 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 16 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-16933
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
TSPC-PFD: TSPC-Based Low-Power High-Resolution CMOS Phase Frequency Detector Thanks: This research was funded in part by National Science Foundation (NSF) award number: 2138253, Rezonent Inc. award number: CORP0061, and UMBC Startup Fund. Dhandeep Challagundla 1 , Venkata Krishna Vamsi Sundarapu 1 , Ignatius Bezzam 2 , Riadul Islam 1 Abstract Phase Frequency Detectors (PFDs) are essential components in Phase-Locked Loop (PLL) and Delay-Locked Loop (DLL) systems, responsible for comparing phase and frequency differences and generating up/down signals to regulate charge pumps and/or, consequently, Voltage-Controlled Oscillators (VCOs). Conventional PFD designs often suffer from significant dead zones and blind zones, which degrade phase detection accuracy and increase jitter in high-speed applications. This paper addresses PFD design challenges and presents a novel low-power True Single-Phase Clock (TSPC)-based PFD. The proposed design eliminates the blind zone entirely while achieving a minimal dead zone of 40 ps. The proposed PFD, implemented using TSMC 28 nm technology, demonstrates a low-power consumption of 4.41 μ W 4.41\mu W at 3 GHz input frequency with a layout area of 10.42 μ m 2 10.42\mu m^{2} . I Introduction Phase-Locked Loops (PLLs) and Delay-Locked Loops (DLLs) are fundamental clock synchronization circuits widely used in high-speed digital and communication systems. As shown in Figure 1 , a DLL (Figure 1 (a)) employs a voltage-controlled delay line to align the output phase with the reference clock, ensuring precise delay matching without frequency synthesis. In contrast, a PLL (Figure 1 (b)) utilizes a Voltage-Controlled Oscillator (VCO) to generate a frequency-locked output that tracks the reference clock, enabling frequency multiplication and jitter minimization [ 1 , 2 ] . A crucial component in both PLL and DLL architectures is the Phase Frequency Detector (PFD). The PFD compares the phase and frequency difference between the reference and feedback signals, generating “Up” and “Down” control signals that regulate the charge pump and loop filter, ultimately adjusting the delay line in DLLs or the VCO in PLLs. The accuracy and speed of the PFD directly impact the loop’s lock time, jitter performance, and overall system stability, making its design optimization critical. Different types of PFDs are designed to meet specific performance requirements. Latch-based PFDs [ 3 ] are preferred for low-power applications but suffer from dead zone limitations. In contrast, tri-state PFDs help mitigate dead zone effects and have a linear phase-detecting range [ 4 , 5 ] . PFD design improvements primarily target reducing the dead zone and minimizing phase noise, while balancing power consumption and operating frequency [ 6 ] . Unlike conventional synchronous systems, where Power, Performance, and Area (PPA) optimization is standard [ 7 , 8 , 9 , 10 , 11 , 12 ] , achieving effective PPA optimization for a PFD remains non-trivial. Various techniques, such as reset-path removal and the use of True Single-Phase Clock (TSPC) [ 13 , 14 , 15 , 16 ] logic, offer promising solutions, but each comes with trade-offs. The selection of an appropriate PFD architecture depends on the specific application requirements, particularly in high-performance PLLs where jitter and phase accuracy are critical considerations. This work proposes a novel TSPC-based PFD circuit designed to enhance power efficiency and reduce dead-zone effects, thereby improving the locking characteristics of both PLL and DLL architectures in advanced low-power applications. The key contributions of this research are: Fig. 1: Generalized block diagram of (a) a delay-locked loop and (b) a phase-locked loop [ 13 ] . • A novel low-power, high-resolution PFD circuit based on TSPC logic. • The dead zone of the proposed PFD is primarily determined by the setup time of the TSPC latch, exhibiting a minimal dead zone of 40 ps. • The proposed design achieves 2.5\times lower power consumption compared to [ 17 ] , and a 72.5% reduction in power relative to [ 18 ] . II Background Traditional PFDs suffer from a large dead zone in their phase detection characteristics at a steady state, leading to increased jitter in the locked state [ 19 ] . This dead zone occurs when the phase difference between the input signals is too small for the PFD to detect, causing erroneous phase detection and potentially locking the PLL to an incorrect phase. Additionally, conventional tristate charge pumps used in PLLs introduce issues such as charge sharing, charge injection, and clock feedthrough when the Up and Down signals switch states, further degrading the performance by introducing phase noise. Another limitation of conventional PFD designs is the blind zone, which occurs when the input signals are close to ±360°. This can lead to instability in phase detection, further complicating the lock-in process of the PLL. Fig. 2: (a) Traditional PFD using D latch design, (b)a pass transistor based fast PFD [ 20 ] (c) existing dead zone free PFD [ 17 ] using 22 transistors. Various design modifications have been explored to minimize the dead zone [ 21 , 17 , 22 , 18 , 23 , 24 , 25 , 26 , 27 ] while maintaining power efficiency [ 28 , 29 ] and high-speed operation [ 30 , 31 , 32 ] . One common approach involves using D flip-flops and an “AND” gate to generate the Up and Down signals [ 13 , 33 ] . While this method is simple, it suffers from high power consumption at increased operating frequencies and requires a large transistor count, leading to higher area utilization. Figure 2 illustrates various PFD architectures. Figure 2 (a) shows the conventional PFD design employing D–latches and a reset logic gate, which suffers from a considerable dead zone due to latch timing limitations. Figure 2 (b) [ 20 ] presents a PFD optimized for low signal-to-noise ratio (SNR) environments, offering improved sensitivity but with limited dead zone mitigation. Figure 2 (c) depicts an advanced dead zone-free PFD architecture, as proposed in [ 17 ] , utilizing 22 transistors and incorporating inverters for faster reset paths to minimize the dead zone. An alternative design aims to eliminate the dead zone entirely [ 22 ] by removing the reset path in the PFD. This results in a more linear phase detection characteristic, enabling precise phase error correction. Such an approach has demonstrated a maximum operating frequency of 4 GHz with high power consumption. Another notable design utilizes a D flip-flop combined with gate diffusion input (GDI) logic technique to optimize power efficiency [ 18 ] . This PFD offers significantly lower power consumption while achieving operating frequencies of up to 3.33 GHz. However, it suffers from a high blind zone of 2\pi/10 around \pm 360\degree , which impacts performance under certain operating conditions. Moreover, previous works have demonstrated their designs at higher technology nodes. In contrast, this work presents a novel TSPC-based PFD circuit implemented in 28nm technology, achieving zero blind zone, minimal dead zone, and low power consumption. The TSPC latch is advantageous as it operates with a single clock phase, eliminating the need for complementary clocks. Its dynamic structure enables faster switching and a lower transistor count, making it well-suited for high-frequency, low-power PFDs. III Proposed Phase Frequency Detector Circuit Fig. 3: The proposed TSPC-based phase frequency detector circuit is designed using 20 transistors with symmetric design to