Mechanical Reinforcement of Graphene via Wrinkling
Hadi Arjmandi-Tash, Roshan Prasad, Hanqing Liu, Gerard Verbiest, Dominic Vella, F. Alijani · 2025
Read Mechanical Reinforcement of Graphene via Wrinkling by Hadi Arjmandi-Tash, Roshan Prasad, Hanqing Liu, Gerard Verbiest, Dominic Vella, F. Alijani (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-16340.txt.
Introduction
Arjmandi-Tash and four co-authors stiffen graphene cantilevers by wrinkling the sheet, in a paper from twenty twenty-five. Atomic cantilevers offer ultimate sensitivity, but monolayer graphene bends too easily for stability. Wrinkles sculpted into suspended membranes change that balance. Nanoindentation and resonance tests confirm large stiffness gains.
Both in-plane and out-of-plane stiffness rise by orders of magnitude. Bending rigidity now dominates behavior that tension once ruled. Shaped cantilevers reach bending rigidities in the million electron-volt range. Mass stays at femtogram scale despite the reinforcement. Vibrational response shifts strongly with the added rigidity. The method opens new paths for nanomechanical sensing devices.
Catalog record
| CREATOR | Hadi Arjmandi-Tash, Roshan Prasad, Hanqing Liu, Gerard Verbiest, Dominic Vella, F. Alijani |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-16340
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mechanical Reinforcement of Graphene via Wrinkling Hadi Arjmandi-Tash, Roshan Prasad, Hanqing Liu, Gerard Verbiest, Dominic Vella, F. Alijani Abstract Mechanical cantilevers are central to nanotechnology, with ultimate sensitivity achieved at the atomic limit, where low bending rigidity makes stability the fundamental challenge. Here, we introduce a wrinkle-induced stiffening approach that enhances the bending rigidity of monolayer graphene by several orders of magnitude, enabling the fabrication of mechanically robust graphene cantilevers. When suspended over microcavities, these wrinkled membranes exhibit significant increases in both in-plane and out-of-plane stiffness, as confirmed by nanoindentation and resonance measurements, which also reveal that enhanced bending rigidity strongly influences their vibrational response. This behavior marks a transition from tension-dominated mechanics to a regime where bending effects become prominent, even in a single atomic layer. By sculpting these structures, we realize graphene cantilevers with measured bending rigidities between 10 6 10^{6} – 10 7 10^{7} eV, while maintaining femtogram-scale mass. These findings open new directions in nanomechanical sensing and cantilever-based technologies. keywords American Chemical Society, L a T e X † † email: [email protected] † † affiliation: Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands † † affiliation: Nannovative, Alexander Fleminglaan 1, 2613 AX Delft, The Netherlands † † affiliation: Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands † † affiliation: Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands † † affiliation: Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands † † affiliation: Mathematical Institute, University of Oxford, Woodstock Road, Oxford OX2 6GG, United Kingdom † † email: [email protected] † † affiliation: Department of Precision and Microsystems Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands 1 Introduction Although graphene is widely recognized as a two-dimensional (2D) material, its lattice is never perfectly flat, practically. Instead, graphene structure exhibits a spectrum of out-of-plane deformations of distinct characteristics Deng and Berry 2016 . Thermal fluctuations with subnanometric amplitudes are intrinsic deformations that spontaneously arise within the graphene lattice at finite temperatures Fasolino et al. 2007 ; Los et al. 2016 . These dynamic fluctuations are fundamental to the energetic stabilization of graphene, serving as a natural mechanism that maintains its structural integrity. Moreover, they give rise to a number of exotic properties, including negative coefficient of thermal expansion Arjmandi-Tash et al. 2017 and size-dependent elastic moduli Sajadi et al. 2018 . Beyond inherent fluctuations, graphene may exhibit non-intrinsic deformations such as wrinkles, induced by external forces Nicholl et al. 2015 ; Ares et al. 2021 . Wrinkles are observable in a wide range of amplitudes, from a few to hundreds of nanometers. Smaller–amplitude wrinkles within this spectrum are responsive to external loading. Especially when stretched, such wrinkles would gradually be suppressed (“ironed-out”), a phenomenon that is accountable for the softening effect that is often observed in the stress–strain response of graphene membranes Verbiest et al. 2016 ; Sarafraz et al. 2021 ; Nicholl et al. 2015 ; Nicholl et al. 2017 . In compressive loadings, on the other hand, small–amplitude wrinkles tend to evolve to generate deformations of higher amplitudes Zang et al. 2013 ; Zhang and Arroyo 2014 . Large–amplitude wrinkles, however, may feature self–contact regions Davidovitch and Démery 2021 with strong van der Waals attractions between the contact surfaces. Such wrinkles are difficult to fully flatten, even after removing the external compression Zang et al. 2013 . Practically, these large–amplitude, stable deformations can emerge from a variety of mechanisms, including compression–induced buckling on pre–stretched elastic substrates Zang et al. 2013 , thermomechanical stresses encountered during graphene growth Ahmad et al. 2011 , or mechanical perturbations introduced during handling and transfer processes. From the technical point of view, the inclusion of wrinkles in graphene structure is expected to improve the mechanical stability of the material. Such irreversible, large–amplitude wrinkles can enhance the out–of–plane rigidity of planar sheets, Blees et al. 2015 ; Zhou et al. 2025 enabling the formation of stable corrugated structures. In fact, free-standing monolayer graphene structures, hitherto, have been realized only in the form of the circular (perimetral clamped), rectangular (four-side clamped) Van Der Zande et al. 2010 ; Castellanos-gomez et al. 2015 or doubly-clamped Arjmandi-Tash et al. 2017 membranes. Monolayer graphene cantilevers — strips fixed at one end and free at the other — potentially represent the ultimate limit of mechanical softness and minimal mass, making them highly attractive for nanomechanical sensing applications. However, their extreme mechanical fragility renders them inherently unstable, and have thus far eluded experimental realization, except when supported in a liquid environment Blees et al. 2015 . In this work, we overcome this challenge and realize monolayer graphene cantilevers by harnessing wrinkle–induced mechanical reinforcement. We deliberately introduce a network of large–amplitude wrinkles into graphene to boost its bending rigidity and prevent collapse. Our fabrication approach involves a surfactant–mediated lateral contraction of centimeter–scale monolayer graphene at an air–liquid interface. This process generates an interconnected wrinkling pattern across the graphene sheet. The wrinkled graphene is then transferred onto a microstructured substrate containing an array of microcavities, yielding suspended graphene membranes that are clamped on all four sides. These four–edge–clamped membranes serve as a convenient platform to study the influence of wrinkles on mechanical properties. Using nanoindentation, we observe that the presence of wrinkles significantly enhances the membrane’s 2D elastic modulus compared to flat graphene. Interestingly, we also observe an increase in the linear stiffness despite the anticipated softening from lateral contraction. This suggests that the induced out-of-plane deformations have enhanced the importance of bending stiffness compared to the membrane tension in wrinkled samples. To confirm this interpretation, we perform resonant measurements on wrinkled graphene drums. The observed vibrational response reveals a clear departure from tension-dominated dynamics, demonstrating that bending rigidity plays an important role in shaping the resonance characteristics of these membranes. Motivated by these observations, we convert the all-edge clamped membranes into one–end–anchored cantilevers while preserving the wrinkle–induced stiffening. Remarkably, despite being only one atom thick, these wrinkled graphene cantilevers exhibit effective bending rigidities on the order of 10^{6}-10^{7} eV — many orders of magnitude higher than the nominal value of \kappa\approx 1.2 eV, known for pristine graphene Sajadi et al. 2018 — and even above the thermally renormalized bending stiffness of micron scale graphene. Our cantilevers exhibit ultralow spring constant in the range of \sim 10^{-2} N/m. At the same time, the polymer–free fabrication process, allows the graphene to retain its exceptionally low mass (estimated as \sim 10^{-13}-10^{-14} g), characteristics that place them in an unprecedented regime of mechanical devices. Our findings demonstrate a viable route towards stabilizing atomically thin cantilevers by engineered corrugations. The wrinkle–assisted strategy, proposed here yields ultra–thin, ultra–light, yet robust cantilevers, opening the door to graphene–based mechanical sensors and resonators with unprecedented sensitivity and performance. 2 Fabrication of Wrinkled Graphene Fabrication of the samples follows a protocol that we developed earlier Lima et al. 2018 ; Arjmandi-Tash et al. 2018 . Briefly, a centimeter-scale graphene sample, chemically grown on a copper foil, was subjected to a lateral force mediated by an enclosing surfactant layer on a liquid