Moderator Simulation for the Compact Positron Source at NLCTA
Ryland Goldman, Sophie Crisp, Spencer Gessner · 2025
Read Moderator Simulation for the Compact Positron Source at NLCTA by Ryland Goldman, Sophie Crisp, Spencer Gessner (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-15975.txt.
Introduction
Ryland Goldman, Sophie Crisp, and Spencer Gessner simulate a slow positron source in a 2025 paper. Positrons are the antimatter twins of electrons, and slow ones serve delicate material probes. Making them starts with a fast electron beam hitting a target, after which most positrons fly too fast to use.
Their simulated setup fires a 100-unit-energy electron beam at a tungsten target. A strong magnet guide and a radio-frequency cavity then prep the positrons for a single-crystal tungsten moderator, which slows them. The full chain yielded about thirty-nine times more slow positrons than a common thin-foil design. The team also offers a new formula for where slow positrons stop inside thin foils, corrected for edge effects.
Catalog record
| CREATOR | Ryland Goldman, Sophie Crisp, Spencer Gessner |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-15975
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Moderator Simulation for the Compact Positron Source at NLCTA Ryland Goldman, Sophie Crisp, Spencer Gessner Abstract Positron moderation is a key part of the production of slow positrons. This paper examines G4beamline simulations of various moderator designs and the addition of a radiofrequency cavity to increase the efficiency of the moderator. A setup consisting of a 100 MeV electron beam incident on a 7 mm tungsten target, a 5 T adiabatic matching device, a 5-cell L-band RF cavity, and a single-crystal tungsten moderator leads to a 39.3 × \times improvement in the number of positrons moderated over a common thin-foil polycrystalline moderator without the AMD and cavity. We also present a novel calculation method for determining the stopping distribution of low-energy positrons in a thin foil, modifying the Makhovian distribution with an exponential ramp to account for edge effects. I Introduction Slow positrons are positrons with kinetic energy <30 keV. Among other fields, these positrons have applications in positron annihilation spectroscopy, ultrafast positron diffraction, and antimatter research. The Next Linear Collider Test Accelerator (NLCTA) at SLAC is currently in the planning stage for a compact positron source that produces slow positrons from an electron linac. A target (also referred to as a “converter” by some sources) produces an electromagnetic shower when the high-energy electrons interact with high- Z nuclei through Coulomb scattering. The resulting Bremsstrahlung radiation is capable of producing electron-positron pairs. These positrons are collimated by an adiabatic matching device and then decelerated using a radiofrequency cavity. We then capture these positrons by stopping them inside a tungsten moderator, where the negative work function of the material causes some to be reemitted from the surface with 3.0 eV kinetic energy. HUGENSCHMIDT2002283 This project attempts to optimize the positron yield from a target-moderator system. A schematic of the setup is shown in Fig. 1 . Figure 1: Schematic of the full linac setup, including the target (A), adiabatic matching device (B), RF cavity (C), and moderator (D). The particle trajectories are colored red for electrons, blue for positrons, and green for photons (photons emitted past the target are excluded for visibility). II Methods The simulations from this project use G4beamline, a particle tracking program derived from the GEANT4 toolkit. G4beamline ; GEANT4 The Penelope2008 models Salvat2009 are used via the FTFP_BERT_PEN physics package. Most simulations were parallelized to run on a 192-core c6a.metal instance on AWS EC2. The key metrics include the target positron yield \gamma_{t} , which represents the fraction of electrons converted to positrons, the moderator yield \gamma_{m} , which represents the number of positrons moderated as a fraction of incident positrons, and the overall system yield \gamma , which is the ratio of the total number of moderated positrons to input electrons. III Target Initially, the target parameters (thickness and composition) are selected to optimize the positron yield \gamma_{t} , defined as the fraction of positrons emitted from the target relative to the number of electrons in. We simulate a 100 MeV electron beam directly incident on a target of varying thickness. The number of positrons produced in the forward direction is divided by the number of incident electrons as shown in Fig. 2 , which agrees with the data found by previous groups. ORourke The optimal thickness is found to be 6.5 mm for tungsten and 7.0 mm for tantalum, and the yield at optimal thickness to be 0.2330\pm 0.0013 positrons per incident electron for tungsten compared to 0.2318\pm 0.0013 for tantalum. The range of thicknesses which deliver at least 90% of the maximum yield is 4.5-8.5 mm for tungsten and 5.5.0-10.0 mm for tantalum. Figure 2: Positron yield \gamma_{t} as a function of target thickness (shown in both millimeters and radiation lengths) for tungsten and tantalum. The vertical lines represent the optimal thickness and error bars show thicknesses within 90% of the optimal yield. For tungsten, the optimal thickness is between 4.5 and 8.5 mm. For tantalum, it is between 5.5 and 10.0 mm. We use 100 MeV electrons; see ORourke for a comparable plot with different electron energies. As there is no significant performance difference between the materials, we instead consider the material properties. Because of its melting point, the GBAR project at CERN chose to use tungsten to prevent ablation by the electron beam. GBAR ; Liszkay Tungsten is also significantly less expensive than tantalum. Liszkay Therefore, we select a tungsten target with a thickness of 7 mm, which is used for the remainder of this paper. Fig. 3 shows the energy spread of the resulting positrons, which peaks at approximately 3 MeV. This peak is dependent on the thickness of the target and energy of the electron beam. Figure 3: Energy distribution histogram of positrons emitted in the forward direction from 100 MeV electron collisions with a 7.0 mm tungsten target. IV Adiabatic Matching Device The positrons emitted from the target have a wide angular divergence which must be reduced in order for the beam to pass through the RF cavity. We use an adiabatic matching device (AMD), which consists of a solenoidal magnetic field decreasing from 5.0 T to 0.5 T with the formula, \displaystyle B_{z}(\rho=0)=\frac{B_{0}}{1+\alpha z} (1) \displaystyle B_{\rho}(\rho,z)=\frac{B_{0}\alpha\rho}{2\left(1+\alpha z\right)^{2}}, (2) where \alpha=0.018 mm -1 is the tapering parameter. AMD ; AMDslac Figure 4: Angular divergence histogram of positrons before and after passing through the adiabatic matching device. The AMD reduces the spread of nearly all particles to under 300 mrad. The reduced angular divergence allows particles to pass through the RF cavity without hitting the walls. Figure 5: Cross-section of positron beam a) emitted by the target, and b) after leaving the AMD, colored by angular divergence. The AMD was modeled as a 25 mm cylinder; particles outside of this radius were killed. As shown in Fig. 4 , the AMD reduces the beam’s angular divergence so particles can enter the small aperture of the RF cavity. Fig. 5 additionally shows the beam’s transverse displacement. Particles with r>25 mm are removed from the simulation as they are assumed to come in contact with the edge of the AMD. Of the high-energy positrons emitted from the target, 69.9% survive the AMD and pass into the RF cavity. V Decelerating RF Cavity To decelerate the beam, we use a five-cell L -band (1.3 GHz) radiofrequency cavity previously developed for the ILC linac PhysRevSTAB.12.042001 . The cavity has been tested up to a gradient of 13.7 MV/m, but we simulate it at a design gradient of 15 MV/m. The search method used to locate the optimal timing offsets for each cell was a Monte Carlo simulated annealing algorithm. Several random initial conditions are chosen throughout parameter space. Similar to a gradient descent, neighboring points are evaluated for the cost function (for example, maximizing particles under 200 keV), but less optimal solutions are accepted probabilistically to escape any local minima. The step size and acceptance probability (temperature) are decreased over time to mimic the annealing of materials. This method is preferable to a gradient descent as it requires less compute time. Figure 6: The simulated annealing algorithm used to tune the RF cavity. Here, the goal was to optimize the number of positrons under 200 keV, which are the most likely to stop