Frequency Selective Reflection of Wideband Signals with Reconfigurable Intelligent Surfaces PubID: pubid: 0000–0000/00$00.00 © 2021 IEEE

Pedro H. C. de Souza, Luciano Mendes · 2025

Read Frequency Selective Reflection of Wideband Signals with Reconfigurable Intelligent Surfaces PubID: pubid: 0000–0000/00$00.00 © 2021 IEEE by Pedro H. C. de Souza, Luciano Mendes (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-15581.txt.

Introduction

Pedro de Souza and Luciano Mendes tackle a blind spot in a promising wireless technology. Reconfigurable intelligent surfaces can bounce signals around obstacles and strengthen reception, which makes them attractive for next-generation networks. But a surface tuned for one frequency may treat the rest of a wideband signal unevenly, quietly degrading it. The authors propose a way to configure the surface so that its reflection is selective across frequencies instead.

Their method shapes how the surface responds over the signal's full bandwidth rather than at a single point. That should let wideband signals keep their quality while still gaining the coverage benefits the surface offers. The authors frame the work as removing an obstacle to adopting these surfaces in future communication systems, where wide channels are the norm.

Catalog record

CREATORPedro H. C. de Souza, Luciano Mendes
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-15581

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Frequency Selective Reflection of Wideband Signals with Reconfigurable Intelligent Surfaces PubID: pubid: 0000–0000/00$00.00 © 2021 IEEE Pedro H. C. de Souza, Luciano Mendes Abstract Recently, the RIS ( RIS ) technology has ushered in the prospect of control over the wireless propagation environment. By establishing alternative propagation paths for the transmitted signals, and by reflecting them in a controllable manner, the RIS is able to improve the signal reception. However, an aspect often overlooked is the potential bandwidth restrictions on the wideband signal reflected by the RIS . If not carefully considered, this can become an impediment for the adoption of the RIS in the next generation of communications systems. Therefore, in this work we propose a RIS configuration method that provides frequency selective signal reflection for wideband signals. 3GPP 3rd generation partnership project 5G fifth generation of mobile networks 6G sixth generation of mobile networks AO alternating optimization AP access point AWGN additive white Gaussian noise DFT discrete Fourier transform LOS line-of-sight MIMO multiple-input multiple-output MISO multiple-input single-output MLP multilayer perceptron NLOS non-line-of-sight NN neural network OFDM orthogonal frequency division multiplex ReLU rectified linear unit RIS reconfigurable intelligent surface SCA successive convex approximation STM strongest tap maximization UE user equipment I Introduction While the 5G ( 5G ) is being deployed, and well underway globally [ 1 , 2 ] , the shaping of the next generation of mobile communications also begins to acquire more definite traces. Study cases and requirements for the 6G ( 6G ) are now being discussed by the academia and industry alike and several new technologies are under scrutiny. More specifically, the RIS technology is currently on track to be considered as a study-item by important standardization bodies, such as the 3GPP ( 3GPP ) [ 3 ] . In general, the RIS can be described as a planar surface composed by multiple elements or reflectors, each of them built with tunable resonant elements. These passive reflectors provide adjustable impedance values [ 4 ] , which can then be used to rotate (phase-shift) the electromagnetic waves impinging on its surface. As long as the RIS is properly positioned between a transmitter and receiver, it is able to reflect signals through additional propagation paths [ 5 ] . Consequently, the RIS can create favorable propagation conditions for the signal transmission, specially if the direct channel between the transmitter and receiver is in NLOS ( NLOS ). Typically, the RIS reflectors are configured in such a way as to promote the most constructive combination of signals at the receiver [ 6 ] . This ensures that the channel capacity at the receiver is increased, since the signal reflected by the RIS is now being combined coherently with signal received via the direct channel. However, the interference management of the signals reflected by the RIS is one aspect that is overlooked by the aforementioned approach [ 3 ] . On the other hand, works such as [ 7 ] , for example, propose a RIS hardware design that provides a greater degree of control over the reflected signals, allowing a frequency selective RIS configuration to be attained. Nevertheless, in this work, we propose a time-variant RIS configuration that is capable of selecting sub-bands for wideband signal reflection. More specifically, we demonstrate that a frequency selective signal reflection can be achieved within a bandwidth of interest, and without special requirements for the RIS hardware. To the best of authors’ knowledge, such a frequency selective RIS configuration method for wideband signal reflection is, as of yet, unexplored for interference management in RIS -aided communication systems. This work is organized as follows: Section II introduces the signal propagation model supporting the proposed RIS -aided communications system; Section III details the RIS configuration method that achieves a frequency selective signal reflection; in Section IV the main findings are discussed with the assistance of numerical results generated via computational simulations and, finally, Section V concludes the paper. I-A Notation Throughout this paper, the n th entry of the vector \mathbf{x} is represented by x\left[n\right] . The entry on the i th row and j th column of the matrix \mathbf{X} is denoted by X_{i,j} . The number of elements contained in a set \mathcal{X} is denoted by \left\lvert\mathcal{X}\right\rvert . The rounding of scalars to the nearest integer is represented by \lfloor x\rceil , whereas \lfloor x\rfloor rounds to the nearest integer smaller than x\in\mathbb{R} . The sets of vectors (matrices) of dimension X ( X\times Y ) with real and complex entries are respectively represented by \mathbb{R}^{X} ( \mathbb{R}^{X\times Y} ) and \mathbb{C}^{X} ( \mathbb{C}^{X\times Y} ). The transposition and conjugate transposition operations of a vector or matrix are represented as \left(\cdot\right)^{\text{T}} and \left(\cdot\right)^{\text{H}} , respectively. The X -dimensional vector of all ones is denoted by \mathbf{1}_{X} . The \ell_{p} -norm, p\geq 1 , of the vector \mathbf{x}\in\mathbb{C}^{N} is given by \|\mathbf{x}\|_{p} and also \left\langle\mathbf{x}\right\rangle=N^{-1}\sum_{n}x\left[n\right] for \mathbf{x}\in\mathbb{R}^{N} . Finally, x\sim\mathcal{U}\left[a\text{,}b\right] is a random value drawn from the uniform distribution over the interval \left[a,b\right] . II System Model Let a point-to-point communications system between a transmitter, denoted as an AP ( AP ), and a receiver or UE ( UE ), be assisted by a RIS with N reflectors or elements. The precise RIS location is conveniently determined so that the AP and UE have LOS ( LOS ) propagation paths with the RIS . Therefore, the RIS can then enhance the signal reception in a scenario where the direct signal propagation paths between the AP and UE are in NLOS . In other words, by reflecting signals transmitted from the AP back to the UE , the RIS creates new propagation paths with more favorable conditions for signal transmission. For this, each RIS reflector is configured with a continuous phase-shift, \theta_{n}=\left[-\pi,\pi\right]\ \forall n\in N . Figure 1 illustrates the communications system discussed in this work. Observe in Figure 1 that the direct channel is represented by L_{d} ( NLOS ) propagation paths between the AP and UE , whereas the composite channel, composed by the cascade of the channels between the AP and RIS and RIS to the UE , have L_{a} and L_{b} propagation paths, respectively. The relative azimuth angle of arrival, \phi_{a} , and the elevation angle, \varphi_{a} , are also being illustrated in Figure 1 1 1 1 The redundant L_{b} , \phi_{b} and \varphi_{b} symbols are omitted to improve visibility. . These angles are used to compute the array response of the RIS [ 8 ] , which accounts for different phase rotations depending upon the location of a given reflector across the RIS plane. Moreover, note that each reflector has sides of size d_{\text{H}} and d_{\text{V}} meters. Fig. 1: Diagram of the propagation model on a \left(x\text{, }y\text{, }z\right) coordinate system. In the next section, we show that it is possible to configure the RIS in such a way as to obtain frequency selective reflection for wideband signals. III RIS Configuration It is also assumed, for the RIS assisted communications system presented in this work, that a wideband signal is transmitted by the AP using the OFDM ( OFDM ) system. In this scenario, typically the RIS is configured with the aim of maximizing the achievable rate

Read the complete text