Modeling of Light Production in Inorganic Scintillators
B. Kreider, I. Cox, R. Grzywacz, J. M. Allmond, A. Augustyn, N. Braukman, P. Brionnet, A. Esmaylzadeh, J. Fischer, N. Fukuda, G. Garcia De Lorenzo, S. Go, S. Hanai, D. Hoskins, N. Imai, T. T. King, N. Kitamura, K. Kolos, A. Korgul, C. Mazzocchi, S. Nishimura, K. Nishio, V. Phong, T. Ruland, K. P. Ry · 2025
Read Modeling of Light Production in Inorganic Scintillators by B. Kreider, I. Cox, R. Grzywacz, J. M. Allmond, A. Augustyn, N. Braukman, P. Brionnet, A. Esmaylzadeh, J. Fischer, N. Fukuda, G. Garcia De Lorenzo, S. Go, S. Hanai, D. Hoskins, N. Imai, T. T. King, N. Kitamura, K. Kolos, A. Korgul, C. Mazzocchi, S. Nishimura, K. Nishio, V. Phong, T. Ruland, K. P. Ry (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-15513.txt.
Introduction
Kreider and a large team model light production in inorganic scintillators in two thousand twenty-five. Such crystals flash when radiation hits them and serve as detectors. They have lately tracked decays of exotic nuclei in place of silicon. Right use needs a firm grasp of how the light forms.
Their frame grows from classic Birks and Meyer-Murray work. It covers heavy ion beams across a broad energy range. For heavy fast ions, delta electrons make most of the light. Tests on a common crystal match data on output and quenching. The model will guide future exotic nuclei work.
Catalog record
| CREATOR | B. Kreider, I. Cox, R. Grzywacz, J. M. Allmond, A. Augustyn, N. Braukman, P. Brionnet, A. Esmaylzadeh, J. Fischer, N. Fukuda, G. Garcia De Lorenzo, S. Go, S. Hanai, D. Hoskins, N. Imai, T. T. King, N. Kitamura, K. Kolos, A. Korgul, C. Mazzocchi, S. Nishimura, K. Nishio, V. Phong, T. Ruland, K. P. Ry |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-15513
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Modeling of Light Production in Inorganic Scintillators B. Kreider, I. Cox, R. Grzywacz, J. M. Allmond, A. Augustyn, N. Braukman, P. Brionnet, A. Esmaylzadeh, J. Fischer, N. Fukuda, G. Garcia De Lorenzo, S. Go, S. Hanai, D. Hoskins, N. Imai, T. T. King, N. Kitamura, K. Kolos, A. Korgul, C. Mazzocchi, S. Nishimura, K. Nishio, V. Phong, T. Ruland, K. P. Rykaczewski, A. Skruch, Z. Y. Xu, R. Yokoyama Abstract In recent experiments, inorganic scintillators have been used to study the decays of exotic nuclei, providing an alternative to silicon detectors and enabling measurements that were previously impossible. However, proper use of these materials requires us to understand and quantify the scintillation process. In this work, we propose a framework based on that of Birks [Proc. Phys. Soc. A 64, 874] and Meyer and Murray [Phys. Rev. 128, 98] to model the light output of inorganic scintillators in response to beams of energetic heavy ions over a broad range of energies. Our model suggests that, for sufficiently heavy ions at high energies, the majority of the light output is associated with the creation of delta electrons, which are induced by the passage of the beam through the material. These delta electrons dramatically impact the response of detection systems when subject to ions with velocities typical of beams in modern fragmentation facilities. We test the accuracy of our model with data from Lutetium Yttrium Orthosilicate (LYSO:Ce), a common inorganic scintillator. We compare calculated light production and quenching factors with experimental data for heavy ions of varying mass and energy as well as make a quantitative estimate of the effects of δ \delta rays on overall light output. The model presented herein will serve as a basic framework for further studies of scintillator response to heavy ions. Our results are crucial in planning future experiments where relativistic exotic nuclei are interacting with scintillator detectors. 1 Introduction Fragmentation facilities, such as the Radioactive Ion Beam Factory (RIBF) at RIKEN and the Facility for Rare Isotope Beams (FRIB), continue to increase the range of rare isotopes available for experimental studies. The need to expand the scope of radioactive decay studies, which requires a nano-second or sub-nanosecond response time scale, necessitated the use of scintillator arrays capable of ion-decay correlations [ 1 , 2 ] , similar to those provided by conventional double-sided silicon strip detectors (DSSD), which until recently dominated the experiments [ 3 , 4 ] . Inorganic-scintillator-based detector arrays were chosen for such applications due to their excellent timing, large stopping power, and position sensitivity when coupled to position-sensitive light sensors [ 5 , 2 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 ] . Detectors used at fragmentation facilities must be able to measure both low-energy decay and high-energy implantation events when the ion and decay occur in the same location. This energy deposition range spans from less than a hundred keV for decays to several GeV of total kinetic energy (TKE) for ion implantations. Without proper detector design, decay events may be too small to be detected, and implantation events may saturate the detector, resulting in lost information. For DSSD, the typical solution is to implement a dual-range electronic chain and let the high-gain (decay branch) saturate for implantation events. This method is not that straightforward for scintillators because of the limited dynamic range of the photomultipliers. Thus, it is crucial to accurately quantify the amount of light that will be generated in both decay and implantation events at the experiment design stage. Practical implementation of these scintillation-based implant detectors is made feasible by an effect known as light quenching, whereby implanted ions produce less light than gammas or electrons at the same energy. Light quenching is due to increased ionization density in the ion’s track, resulting in saturation of the scintillator’s light output. The so-called quenching factor, qf , quantifies this effect through the ratio of actual ion TKE, E , to the light measured by the calibrated detector, L : qf=\frac{E}{L} (1) When assuming a linear response to \gamma -rays and electrons, scintillators can be calibrated using standard radioactive sources. In using such a calibration, we take the perfectly linear, unquenched response L=E as a reference for comparing the quenching experienced by different ions. Light output measurements calibrated in this manner are sometimes denoted with units of MeVee or “MeV electron equivalent." Estimating the light quenching from a scintillator detector is a crucial part of the experimental design process. While several models of the scintillation mechanism exist [ 18 , 19 , 20 ] , they are formulated in terms of differential quantities that are experimentally cumbersome to extract, making it difficult to determine responses for new scintillators across an extensive energy range or for many different nuclei. A model capable of predicting the light output as a function of the ion’s TKE, known ion properties such as mass, and theoretically calculable quantities is needed. Another issue is that the evaluation of almost all of the existing models has been limited to somewhat low- Z ions and/or low energy per nucleon E/A [ 19 , 21 , 20 , 22 , 23 , 24 , 25 ] , while it is the goal of radioactive ion beam facilities to push to high- Z nuclei with high energies per nucleon. Therefore, we propose an approximate phenomenological approach to modeling light output and estimating quenching factors of heavy nuclei in Lutetium Yttrium Orthosilicate (LYSO:Ce, Lu 1.9 Y 0.1 SiO 5 ), a commonly-used inorganic scintillator. This method, based on the models of Birks [ 18 , 25 ] and Meyer and Murray [ 21 ] , is intended to serve as a basic framework for further studies of scintillator light production in the future. 2 Theoretical Background The most well-known model of scintillator response to heavy ion beams was introduced by Birks [ 18 ] , who suggested that light quenching was the result of increased ionization density in the track of heavier incident ions. This, in turn, leads to a partial saturation of available luminescence centers inside the scintillator, decreasing the total light output. Birks’ model expresses light output as a function of energy loss or stopping power: \frac{dL}{dx}=\frac{a\frac{dE}{dx}}{1+b\frac{dE}{dx}} (2) Here, \frac{dL}{dx} is specific fluorescence, and \frac{dE}{dx} is stopping power. The coefficients a and b are properties of the material and can be determined empirically by fitting \frac{dL}{dx} as a function of \frac{dE}{dx} . Algebraic manipulation gives another version of the formula which is more convenient for our purposes [ 25 ] : \frac{dL}{dE}=\frac{a}{1+b\frac{dE}{dx}} (3) \frac{dL}{dE} , referred to as scintillation efficiency, is a measure of how effectively the ion’s energy is converted to light; in principle, it should take values between 0 and 1, provided that the detector has been calibrated. According to this elegantly simple model, the coefficients a and b should be unique for each scintillator and should approximately characterize its response to any ion at any energy. Though originally created for organic scintillators, the Birks formula seems to be a good approximation for the quenching effect in inorganic scintillators. One demonstration of this is the work of Koba et