B(E2) anomaly and triaxial deformation in the interacting boson model

Yu Zhang, Wei Teng · 2025

Read B(E2) anomaly and triaxial deformation in the interacting boson model by Yu Zhang, Wei Teng (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-15434.txt.

Introduction

Yu Zhang and Wei Teng examine an odd dip in radiation strength from spinning atomic nuclei, in a 2025 physics study. The dip, called the B(E2) anomaly, shows one step of a nucleus's spin-down glow weaker than the step below it. The team test whether a three-axis squashed shape can explain the dip inside the interacting boson model, a standard shell picture of nuclei. They work through several triaxial schemes with no symmetry shortcuts.

In each scheme, strong mixing between bands could produce the dip. The effect is thus not tied to one shape story. Fits to data for platinum, osmium, and tungsten isotopes matched the low values seen in labs. The authors offer band mixing in triaxial nuclei as a simple account of the anomaly. Their checks span the known cases in this mass range.

Catalog record

CREATORYu Zhang, Wei Teng
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-15434

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

B(E2) anomaly and triaxial deformation in the interacting boson model Yu Zhang, Wei Teng Abstract The influences of triaxial dynamics on the anomalous E ​ 2 E2 transitional behaviors in the interacting boson model (IBM) have been comprehensively examined without symmetry restrictions. Specifically, different triaxial schemes in the IBM have been analyzed using a general procedure for deriving triaxial rotor modes based on two distinct approaches. The results indicate that the B ⁡ ( E ​ 2 ) B(E2) anomaly feature, characterized by B 4 / 2 = B ( E 2 ; 4 1 + → 2 1 + ) / B ( E 2 ; 2 1 + → 0 1 + ) < 1.0 B_{4/2}=B(E2;4_{1}^{+}\rightarrow 2_{1}^{+})/B(E2;2_{1}^{+}\rightarrow 0_{1}^{+})<1.0 , can occur in all triaxial schemes due to strong band-mixing effects. This finding is further tested in describing the available data for 172 Pt, 168,170 Os and 166 W using the model constructed upon the extended consistent- Q Q formula, providing a simple theoretical explanation of the depressed B 4 / 2 B_{4/2} values observed in the experiments. pacs 21.60.Fw, 21.60Ev, 21.10Re I. Introduction The emergence of collective features is one of the most important and striking characteristics of complex nuclear many-body systems. The associated collective modes can be well illustrated within a Bohr-Mottelson picture of the dynamics using geometric language Bohrbook , which have been extended to encompass spherical vibrator, axially-deformed rotor, triaxially-deformed rotor and \gamma -unstable rotor. Generally, these collective modes can be demonstrated equivalently well within the framework of the interacting boson model (IBM) using group or algebraic language Iachellobook , including U(5) (spherical vibrator), SU(3) (axially-deformed rotor) and O(6) ( \gamma -unstable rotor). In experiments, different collective modes may be readily discerned through observing low-lying spectroscopic observables related to yrast states, such as the typical ratios, R_{4/2}\equiv E(4_{1}^{+})/E(2_{1}^{+}) and B_{4/2}\equiv B(E2;4_{1}^{+}\rightarrow 2_{1}^{+})/B(E2;2_{1}^{+}\rightarrow 0_{1}^{+}) . These are characterized by R_{4/2}\equiv E(4_{1}^{+})/E(2_{1}^{+})\approx 2.0 for spherical vibrator, R_{4/2}\approx 3.33 for axially-deformed rotor and R_{4/2}\approx 2.5 for \gamma -unstable rotor. Although the different modes are not easy to distinguish from each other by using the B(E2) ratio, they all show a common feature of B_{4/2}\equiv B(E2;4_{1}^{+}\rightarrow 2_{1}^{+})/B(E2;2_{1}^{+}\rightarrow 0_{1}^{+})>1.0 , along with R_{4/2}\geq 2 . For a long time this has been regarded as a robust rule governing nuclear collective modes due to its consistency with various theoretical calculations and extensive experimental data on collective nuclei. However, this rule has been broken by observing the results from the recent measurements on some neutron-deficient nuclei Grahn2016 ; Saygi2017 ; Cederwall2018 ; Goasduff2019 ; Zhang2021 near N_{\mathrm{n}}=90 and the proton dripline, which suggest an anomalous collective motion characterized by R_{4/2}>2.0 and B_{4/2}\ll 1.0 . The unusually B_{4/2}<1.0 feature was actually found even earlier to exist in other collective nuclei but to a less extent Cakirli2004 . Clearly, such an anomalous phenomenon, called B(E2) anomaly, cannot be understood from the familiar conventional collective modes nor be produced by large-scale shell model or beyond mean-field approaches, therefore leaving a big challenge to their theoretical explanations Grahn2016 . Recent progress on this issue has been made Zhang2022 within the IBM framework by employing the SU(3) image of the triaxial rotor Zhang2014 ; Smirnov2000 ; Leschber1987 ; Castanos1988 , by which the B(E2) anomaly characterized by B_{4/2}<1.0 is attributed as a result of the finite- N triaxial rotor modes Zhang2014 . This method, which introduces high-order SU(3) symmetry-conserving terms, may extend the traditional descriptions of axially-deformed (prolate or oblate) rotor, based on two-body SU(3) interactions, to triaxially-deformed rotor cases Zhang2014 ; Smirnov2000 . However, another work Wang2023 pointed out that the Hamiltonian established in the O(6) limit, analogous to that adopted in the SU(3) image Zhang2022 , fails to produce B(E2) anomaly. This raises an question: can the B(E2) anomaly feature manifests in an IBM scenario different from the SU(3) scheme or a specific type of Hamiltonian Zhang2022 . In other words, to what extent is the B(E2) anomaly feature dictated by triaxial deformation a model-independent result. On the other side, microscopic mean-field calculations suggest that axially asymmetric deformations can occur in nuclear systems Xiang2018 , and it has even been pointed out that some degree of triaxiality is present in nearly all regions of the nuclear chart according to the recent analysis based on the shell model approaches Bonatsos2017I ; Bonatsos2017II ; Tsunoda2021 ; Otsuka2023 ; Rouoof2024 . In contrast, a mean-field \gamma deformation has no way to be generated by the frequently adopted IBM Hamiltonian up to two-body terms VC1981 . So, establishing triaxial rotor modes within the IBM framework associated with a certain of intrinsic deformation remains an interesting objective. The previous approach used to explain the B(E2) anomaly Zhang2022 was just constructed from the IBM realization of triaxial rotor modes Zhang2014 ; Smirnov2000 , which was achieved based on the SU(3) image of the rotor model Leschber1987 and guided by the relationship between the \gamma deformation and SU(3) irreducible representations (IRREPs) Castanos1988 . Nevertheless, there is more than one way to produce triaxial deformation in the IBM, such as introducing the cubic interaction (d^{\dagger}\times d^{\dagger}\times d^{\dagger})^{(3)}\cdot(\tilde{d}\times\tilde{d}\times\tilde{d})^{(3)} VC1981 ; Heyde1984 or adopting the extended consistent- Q formula Fortunato2011 . These approaches were ever widely discussed to identify the influence of triaxiality in the IBM descriptions of nuclear properties VC1981 ; Heyde1984 ; Fortunato2011 ; Sorgunlu2008 ; Casten1985 ; Ramos2000I ; Ramos2000II ; Wang2023 and will be revisited here to uncover the correlation between B(E2) anomaly and triaxial deformation. The main purpose of this work is to provide a new procedure of constructing triaxial modes in the IBM, by which different triaxial schemes allowing B_{4/2}<1.0 will be examined to clarify the role of triaxiality in generating B(E2) anomaly. II. Triaxial rotor Hamiltonian in the IBM Hamiltonian and physical operators in the IBM Iachellobook are constructed from two kinds of boson operators, namely the s boson with J^{\pi}=0^{+} and the d boson with J^{\pi}=2^{+} . Among them, the angular momentum operator and quadrupole moment operator are defined by \displaystyle\hat{L}_{u}=\sqrt{10}(d^{\dagger}\times\tilde{d})_{u}^{(1)}\,, (1) \displaystyle\hat{Q}_{u}=(d^{\dagger}\times\tilde{s}+s^{\dagger}\times\tilde{d})_{u}^{(2)}+\chi(d^{\dagger}\times\tilde{d})_{u}^{(2)}\, (2) with the parameter \chi\in[-\frac{\sqrt{7}}{2},~\frac{\sqrt{7}}{2}] . To build triaxial modes in the IBM, the Hamiltonian is proposed to include two parts, \displaystyle\hat{H}_{\mathrm{Tri}}=\hat{H}_{\mathrm{S}}+\hat{H}_{\mathrm{D}}\,, (3) which is achieved by analogy with the form adopted by the SU(3) scheme Zhang2022 . The static part \hat{H}_{\mathrm{S}} is designed to yield a triaxial potential at the mean-field level, while the dynamic part \hat{H}_{\mathrm{D}} serves to generate the associated band-mixing effects. Specifically, \hat{H}_{\mathrm{D}} can be formulated from a scalar polynomial in \hat{L} and \hat{Q} and given by \displaystyle\hat{H}_{\mathrm{D}}=a\hat{L}^{2}+b(\hat{L}\times\hat{Q}\times\hat{L})^{(0)}+c(\hat{L}\times\hat{Q})^{(1)}\cdot(\hat{L}\times\hat{Q})^{(1)}\,, (4) where a,~b,~c denote the parameters related to the specified triaxial deformation as discussed below. It is noteworthy that the terms involved in ( 4 ) have been extensively addressed in the IBM description of rotational dynamics Zhang2014 ; Smirnov2000 ; Berghe1985 ; Vanthournout1988 ; Vanthournout1990 ; Teng2024 . For instance, it has been demonstrated that the degeneracies in members of the \beta and \gamma bands in the SU(3) limit of the IBM could be lifted by incorporating these terms into the Hamiltonian Vanthournout1990 . (A). Relation to the rotor model To illustrate the role of \hat{H}_{\mathrm{D}} defined in ( 4 ), we will demonstrate how the Hamiltonian form can be related to a triaxial rotor. The Hamiltonian of the quantum rotor

Read the complete text