Bending nanoribbon to induce large anisotropic magnetoconductance
Ponder Liu, Hao-Cheng Hung, You-Ting Huang, Jia-Cheng Li, Carmine Ortix, Ching-Hao Chang · 2025
Read Bending nanoribbon to induce large anisotropic magnetoconductance by Ponder Liu, Hao-Cheng Hung, You-Ting Huang, Jia-Cheng Li, Carmine Ortix, Ching-Hao Chang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-15385.txt.
Introduction
Liu and co-authors test what happens when a flat ribbon of material is bent inside a magnetic field in their 2025 theory paper. Bending changes how the field acts inside the ribbon. Some field directions give an even effect, while others give an uneven one. That split lets distinct magnetic states form in the bulk, at the faces, or at the edges.
The team shows that these states can make current flow depend strongly on field direction. The effect can reach 100 percent and grow higher with sharper bends or wider angles. It stays steady across a broad energy range, at weak fields, and at room heat. Tests cover both plain electron sheets and graphene.
Catalog record
| CREATOR | Ponder Liu, Hao-Cheng Hung, You-Ting Huang, Jia-Cheng Li, Carmine Ortix, Ching-Hao Chang |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 17 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-15385
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Bending nanoribbon to induce large anisotropic magnetoconductance Ponder Liu, Hao-Cheng Hung, You-Ting Huang, Jia-Cheng Li, Carmine Ortix, Ching-Hao Chang Abstract When a nanoribbon is bent under a homogeneous external magnetic field, the effective magnetic field inside becomes either homogeneous or inhomogeneous, depending on the direction of the field. This enables the selective creation of bulk, interface, and edge magnetic states in the bent structure, for a magnetic field with a strength. We establish theoretically that these tuneable states lead to a strong geometry-induced anisotropic magnetoconductance (GAMC) in perpendicularly bent nanoribbon, which can reach up to 100%. Moreover, the GAMC can be further enhanced to 200%, 300%, or even higher by either further bending or tuning the bending angle. The potential of this phenomenon for practical applications is demonstrated by its stable anisotropy, which remains consistent across a wide range of Fermi energies, can be observed even at weak magnetic fields and room temperature, and occurs in various systems such as two-dimensional electron gas (2DEG) and graphene. Introduction — Since the successful isolation of graphene in 2004 Novoselov et al. 2004 , research into two-dimensional (2D) materials has gained significant momentum. Unlike conventional bulk materials, where properties are dominated by bulk states, 2D materials are primarily governed by surface or interface states that are artificially controllable. This distinction leads to unique electrical, optical, mechanical, and thermodynamic properties, making them a rich field of study. Additionally, the emergence of special geometric structures, such as curves, helices, and spirals, in 2D materials opens up new possibilities for tailoring their properties Xie et al. 2009 ; Ma et al. 2020 ; Wang et al. 2024 ; Shen et al. 2019 . For instance, the unconventional superconductivity can be created by twisting bilayer graphene Cao et al. 2018 . Magneto-transport-like phenomena, such as nonlinear Hall effects, can exhibit in a corrugated graphene system with time reversal symmetry Sodemann and Fu 2015 ; Ma et al. 2019 ; Du et al. 2021 ; Ho et al. 2021 . Building on advances in geometry-induced phenomena, the anisotropic magnetoconductance (AMC) effect presents an intriguing avenue for exploration in 2D materials. The variation of electric current with the magnetization direction is typically linked to intrinsic properties such as spin-orbit coupling and the scattering behavior of charge carriers Smit 1951 ; Velev et al. 2005 . This phenomenon has been experimentally observed in materials like Fe, Co, Ni, and their alloys, with practical applications in devices such as magnetic field sensors McGuire and Potter 1975 ; O’Handley 2000 . This raises the question of whether the AMC effect, traditionally dependent on intrinsic material properties, could be tuned through geometric manipulation in 2D materials Chang et al. 2014 ; Chang and Ortix 2017 ; Gentile et al. 2022 . Figure 1: (color online). (a), Front view of the bent 2DEG nanoribbon with bending angle \phi=\pi/2 subjected to a 4 T transverse magnetic field. The semi-classical motion of charge carriers in the applied magnetic field with angle \theta=\pi/2 and \theta=0 are shown in panel (b) and (c), respectively. (d), The conductance difference between two systems increases as a function of Fermi energy. (e), The ballistic anisotropic magnetoconductance (GAMC) ratio as a function of Fermi energy. Panels (d) and (e) are estimated at temperature T = 0.1 K. In this study, we theoretically demonstrate that geometry-induced anisotropic magnetoconductance (GAMC) can reach 100% or even 300% in the electronic transport of well-developed bent nanomembranes McGuire and Potter 1975 ; O’Handley 2000 , as is shown in Fig.1. Unlike the AMC observed in specific traditional magnetic materials, the GAMC we propose is entirely driven by the bent geometry, which induces a transition between magnetic states when the direction of the magnetic field is switched (see Figs.1(b) and (c)). Therefore, this effect is widely applicable to conducting 2D nanomembranes, such as 2DEG and graphene, which host different types of charge carriers. Moreover, the GAMC value in bent graphene remains fixed over a wide range of Fermi energies, persists at room temperature, and can be realized in weak magnetic fields ( < 1T), offering potential for expanding AMC applications into novel sensing or control functionalities Ritzinger and Vyborny 2023 . Two-dimensional electron gas — We begin by considering a two-dimensional electron gas (2DEG) system Sommer 1964 ; v. Klitzing et al. 1980 formed in a GaAs/AlGaAs heterostructure. The carriers therein have effective mass m^{\star}=0.067\,m_{e} Beenakker and van Houten 1991 , and exhibit mean free path up to 10\mu m at low temperature Weiss et al. 1989 . The system can be fabricated into bent nanostructures through selective underetching of pseudomorphically strained bilayers. In our model, the bending corners are modeled by quarter-circles occupying 1\% of the total length L . For the 2DEG nanoribbon with bending angle \phi and is subjected to an homogeneous magnetic field with strength B_{0} (see Fig.1 (a)), the effective magnetic field on the nanoribbon is \displaystyle B_{\rm eff,L}=-B_{0}\cos(\theta+\phi), \displaystyle B_{\rm eff,R}=B_{0}\cos(\theta-\phi) (1) where L and R indicates the left and right halves of the nanoribbon, respectively, \theta is the angle of applied magnetic field, and \phi is the bending angle of nanoribbon. For \theta=\pi/2 and \phi=\pi/2 in Eq.(1), the effective magnetic field throughout the ribbon becomes uniform with a magnitude of B_{0}/\sqrt{2} . The carriers form localized cyclotron orbits in the central region of the ribbon and skipping orbits at two edges when the field is strong enough to reduce the diameter of cyclotron orbit shorter than the ribbon width (see Fig.1 (b)). However, when \theta is changed to zero, the effective magnetic field becomes a magnetic-field dipole. This leads to carriers in the left half experience an effective field of -B_{0}/\sqrt{2} , while in the right half experience an effective field of B_{0}/\sqrt{2} . As a result, the formation of magnetic-field dipole results in two kinds of distinct magnetic states coexisting – carriers in the central region form snake states, which transport along the longitudinal direction, and form skipping states at edges that propagate in a direction opposite to the snake states (see Fig.1 (c)). It can be expected that the variation in species of magnetic states (see Fig.1 (b) and Fig.1 (c)) may drive the anisotropic magnetotransport effect. To investigate this, we model a nanoribbon system with a width 314\text{nm} and the magnetic field magnitude is fixed at B_{0}=4\text{T} . This setup ensures that the magnetic length l_{B}=\sqrt{\hbar/eB} is much smaller than the system width. Under these conditions, the Zeeman splitting and other spin-related effects are negligible, allowing us to focus solely on orbital contributions (see Supplemental Material). To quantify this magnetotransport effect, we define the GAMC magnitude as Velev et al. 2005 \displaystyle{\rm GAMC}(\theta)=\frac{G(\theta)-G(\pi/2)}{G(\pi/2)} (2) The variations of distinct magnetic states in different B-field direction, which, in turn, lead to corresponding difference in the longitudinal conductance of the system and further result in significant GAMC magnitude up to 100%, as shown in Figs.1(d) and (e). Figure 2: (color online). Magnetic spectrum of the nanoribbons with width L=32\pi^{2}nm with different bending shape subjected to a 4 T magnetic field with relative angles \theta=\pi/2 and 0 . (a) and (b) are with bending angle \phi=\pi/2 . (c) and (d) are bent twice with \phi=\pi/2 . (e) and (f) are bent once