Singularity of the axisymmetric stagnation-point-like solution within a cylinder of the 3D Euler incompressible fluid equations

Yinshen Xu 1, Miguel D. Bustamante 1 · 2025

Read Singularity of the axisymmetric stagnation-point-like solution within a cylinder of the 3D Euler incompressible fluid equations by Yinshen Xu 1, Miguel D. Bustamante 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-14550.txt.

Introduction

Yinshen Xu and Miguel Bustamante wrote a fluid dynamics paper in 2025. They study an ideal fluid that cannot be squeezed, held inside a cylinder. The flow is round-symmetric and curls around a fixed point, much like water near a drain. The question is whether the spin can blow up in finite time.

The authors solve the model in exact form along the paths of fluid parts. Their key finding turns on the shape of the spin-growth rate at its lowest point. A flatter low point delays any blow-up, and flat enough stops it for good. They give exact cut-off values for the shape, which differ for blow-ups at the center and on a ring. The work shows how the start shape of a flow can decide its fate.

Catalog record

CREATORYinshen Xu 1, Miguel D. Bustamante 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE94 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-14550

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Singularity of the axisymmetric stagnation-point-like solution within a cylinder of the 3D Euler incompressible fluid equations Yinshen Xu 1, Miguel D. Bustamante 1 Abstract In this paper we investigate analytically the formation of finite-time singularities in the three-dimensional incompressible Euler equations under the specific ansatz of Gibbon, Fokas, and Doering’s vorticity-stretching model ( Gibbon et al. 1999 ) , within a bounded cylindrical domain and under axisymmetric conditions. We derive explicit Lagrangian solutions for the vorticity, its stretching rate, fluid pathlines and velocity components, by utilizing constants of motion associated with the system’s field-dependent infinitesimal continuous symmetries. The central finding is that the existence and nature of a finite-time singularity are determined exclusively by the local geometric structure of the initial vortex stretching rate in the vicinity of its global minimum point. The analysis reveals that whether a singularity forms in a finite time depends on how “flat” the initial vortex stretching rate profile is near the minimum point. Specifically, we demonstrate that the flatter the initial stretching rate is near its minimum, the later the potential singularity occurs, with a sufficiently flat profile completely suppressing a finite-time blowup. For stretching-rate profiles that approach the minimum with a power-law behavior, critical thresholds for the power-law exponent are identified, which separate regular solutions from those that develop a finite-time singularity. These thresholds differ depending on whether the singularity occurs at the cylinder’s centre or on a ring away from the centre, with minima at the centre requiring higher “flatness” to avoid a finite-time singularity of the solution. This work provides a rigorous analytical framework that elucidates how the local geometric structure of the initial conditions governs the potential for singularity formation in 3D fluid flows, offering fundamental insights into the interplay between symmetry, initial data, and the development of extreme events in idealised turbulence. † † affiliation: 1 School of Mathematics and Statistics, University College Dublin, Belfield, Dublin 4, Ireland 1 Introduction In fluid mechanics, the conservation of momentum for an inviscid, adiabatic fluid is elegantly expressed by Euler’s equation—a cornerstone of the field whose significance cannot be overstated. Since its formulation in 1761 by Leonhard Euler, this equation has had a profound and lasting impact on mathematics, physics, and engineering ( Euler 1761 ) . We define a 3D incompressible Euler fluid by its velocity and pressure fields. Let \bm{u}:\Omega\times[0,T)\rightarrow\mathbb{R}^{3} be a vector field and p:\Omega\times[0,T)\rightarrow\mathbb{R} be a scalar field, where \Omega\subseteq\mathbb{R}^{3} denotes the spatial domain and [0,T)\subseteq[0,\infty) represents the time domain, with T>0 . Because we will consider classical solutions and explicit formulas where the singularity time is computable in terms of the initial condition, we will assume these fields to be of class C^{k} piecewise in terms of spatial derivatives, where k is appropriately chosen. If \frac{\partial\bm{u}}{\partial t}+(\bm{u}\cdot\nabla)\bm{u}=-\nabla p\,,\qquad\nabla\cdot\bm{u}=0\,,\qquad\text{for \quad all}\qquad\bm{x}\in\Omega\,,\quad t\in[0,T)\,, (1) where \nabla is the gradient operator, then \bm{u} and p represent the velocity and pressure fields of a 3D incompressible Euler fluid, and equation ( 1 ) is referred to as the 3D Euler equation for an incompressible fluid (the incompressibility condition is \nabla\cdot\bm{u}=0 ). Another field playing an important role in this research is the vorticity \bm{\omega}:=\nabla\times\bm{u} , which satisfies a dynamical equation that is obtained by taking the curl of the Euler equation ( 1 ): \frac{\partial\bm{\omega}}{\partial t}+\left(\bm{u}\cdot\nabla\right)\bm{\omega}-\left(\bm{\omega}\cdot\nabla\right)\bm{u}=0\,,\qquad\nabla\cdot\bm{\omega}=0\,,\qquad\text{for \quad all}\qquad\bm{x}\in\Omega\,,\quad t\in[0,T)\,, (2) which is the so-called Helmholtz vorticity equation. From its definition as a curl, it is obvious that \nabla\cdot\bm{\omega}=0 . One of the most intriguing topics in mathematical fluid dynamics is whether a finite-time singularity emerges in the solution of the 3D Euler fluid equations ( 1 ). Many numerical experiments have revealed the existence of a finite-time singularity, see for example Gibbon 2008 ; Luo & Hou 2014 ; Choi et al. 2017 ; Larios et al. 2018 ; Hou 2023 . A milestone of the investigation of the regularity of the solution to the 3D Euler equations is the so-called BKM theorem ( Beale et al. 1984 ) which points out that the convergence of the time integral of the supremum norm (over the spatial domain) of vorticity is a necessary and sufficient condition for 3D Euler fluids to maintain regularity. Subsequently, Constantin et al. 1996 proved that the finite norm of the velocity field along with vorticity direction vectors of class C^{1} constitute a necessary condition to keep 3D Euler flows regular within a finite time. Over the years, considerable research has been conducted on the study of regularity properties and local well-posedness of the 3D Euler fluid equation, which has been greatly summarised by Drivas & Elgindi 2023 . Generally speaking, using a more universal model will broaden the applicability of the results, but it also implies that the description of the behavior of a specific Euler solution will be more abstract. By sacrificing some universality, such as introducing some symmetry class or other restrictive class, some special solutions may be expressed in a more explicit way, making it easier for us to understand the various behaviors of the solutions, including the properties of potentially singular behaviors. See the studies with axisymmetry ( Elgindi & Jeong 2020 ) , self-similarity ( Martínez-Argüello & Rica 2024 ) , and octahedral symmetry ( Elgindi & Jeong 2021 ) , for instance. When we further impose a simplifying ansatz, the properties of the Euler flows may even be manifested by explicit equations and solutions. One such ansatz is the stagnation-point-type flow proposed by Gibbon, Fokas and Doering ( Gibbon et al. 1999 ) , featuring the vortex stretching rate \gamma(x,y,t) (see also Stuart 1988 and Lundgren 1982 ): \bm{u}(x,y,z,t)=\left(u_{x}(x,y,t),u_{y}(x,y,t),z\gamma(x,y,t)\right), (3) where \displaystyle(x,y,z,t)\in\Omega_{2}\times\mathbb{R}\times[0,T)\,,\quad\Omega_{2}\subset\mathbb{R}^{2}. (4) In the following, we will name this “Gibbon et al. ’s vorticity-stretching model”, or simply “Gibbon’s model”. Evidently, system ( 3 ) contains infinite energy, suggesting that if a finite-time singularity occurs then it will do so not at a point but on a one-dimensional manifold of the spatial domain. Physically speaking, this singularity with infinite energy demonstrates a change in some topological structure or the breakdown of the stagnation-type ansatz in ( 3 ). In what follows we list previous studies that, to the best of our knowledge, are relevant to Gibbon’s stagnation-type model. As early as 1989, Childress, Ierley, Spiegel and Young exhibited blowup in their numerical analysis of two-dimensional stagnation flow Childress et al. 1989 . As for the three-dimensional case, equation ( 3 ), the first numerical experiment was implemented by Ohkitani & Gibbon 2000 , discovering the finite-time blowup for specific initial conditions and finding the approximate inverse proportional relation \displaystyle\max_{(x,y)\in\Omega_{2}\subseteq\mathbb{R}^{2}}|\gamma(x,y,t)|\propto(T_{*}-t)^{-c} with c\approx 1 , where T_{*} denotes the singularity time and \Omega_{2}=\mathbb{T}^{2} , the 2 -torus. Shortly afterwards, an analytic Lagrangian solution for the stretching rate \gamma(x,y,t) was given by Constantin 2000 in the same case \Omega_{2}=\mathbb{T}^{2} . In the limiting case \Omega_{2}=\mathbb{R}^{2} of an infinite domain, Gibbon, Moore and Stuart obtained, in the case of zero plane vorticity \omega , explicit axisymmetric solutions for \gamma and pathlines that indeed have finite-time singularity ( Gibbon et al. 2003 ) . All these solutions find their generalization in the work of Bustamante 2022 which introduces a rich Lie-algebra structure of infinitesimal contemporaneous symmetries, based on which a general Lagrangian solution of stretching rate

Read the complete text