Visualization of curvature on curve and surface by tangential angle parametrization
Yutaro Kabata, Shigeki Matsutani, Yuta Ogata · 2025
Read Visualization of curvature on curve and surface by tangential angle parametrization by Yutaro Kabata, Shigeki Matsutani, Yuta Ogata (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-13708.txt.
Introduction
Yutaro Kabata, Shigeki Matsutani, and Yuta Ogata published this geometry paper in 2025. Curvature measures how sharply a curve or surface bends at each point, but raw numbers are hard to picture. The authors propose a unified way to draw curvature for flat curves and for surfaces of revolution, shapes made by spinning a curve around an axis. Their tool is the tangential angle, the direction a moving point faces as it travels along the curve.
For flat curves, they place markers at equal steps of that angle. The markers bunch where bending is strong, and they pick out bends and vertices on their own. On spun surfaces, lines drawn by the same rule trace how the main curvatures vary. Ridges and parabolic curves show up naturally in the drawing. The authors say the method gives clear pictures with no arbitrary tuning, useful for both study and design.
Catalog record
| CREATOR | Yutaro Kabata, Shigeki Matsutani, Yuta Ogata |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-13708
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Visualization of curvature on curve and surface by tangential angle parametrization Yutaro Kabata, Shigeki Matsutani, Yuta Ogata Abstract We propose a unified method to visualize curvature on planar curves and surfaces of revolution using the tangential angle parameter. For plane curves, placing markers at equal increments of the tangential angle reveals local bending features and naturally highlights inflection points and vertices. This approach extends to surfaces of revolution, where curvature lines drawn at equal tangential angle steps reflect principal curvature variations and naturally expose ridge and parabolic curves. Our method provides clear, consistent visualizations without arbitrary parameter tuning, offering geometric insight for both analysis and design applications. 0 0 0 2010 Mathematics Subject classification: 53A04, 53A05, 00A66 0 0 0 Key Words and Phrases. Curve, surface of revolution, visualization of curvature, tangential angle 1 Introduction Curvature is a fundamental geometric concept that quantifies how curves and surfaces bend. Clear and consistent visualization of curvature is essential in both theoretical research and practical applications. In this paper, we demonstrate a simple yet powerful method for visualizing curvature on planar curves and surfaces of revolution by using the curve’s tangential angle \theta . Visualizing curvature can be hard when a shape contains local parts with complicated details in large regions. For example, engineers often need to assess curvature of a small feature without losing sight of its meaning on the overall context. Meeting this demand requires a visual representation that preserves both local detail and global structure. In practice, this means projecting the bending behaviour of curves and surfaces onto a two-dimensional plane in a perceptually faithful way. The computer-graphics (CG) and computer-vision (CV) communities have long addressed this issue [ 4 , 5 , 6 , 7 , 8 , 12 , 13 , 14 ] . On planar curves, sampling at equal arc-length steps may miss sharp bends or waste markers on nearly straight stretches. On surfaces, particularly in computer graphics and manufacturing, curvature lines are commonly used to illustrate surface bending, but their spacing is usually chosen arbitrarily [ 9 , 11 ] . Fixed intervals can lead to uneven coverage—some areas become overcrowded with lines while others are sparsely detailed—because line density depends on both curvature magnitude and the chosen parameter. A parameterization that automatically adjusts line placement to local curvature would remove this arbitrariness, enabling consistent, informative visualizations without manual tuning. Our approach begins with planar curves. We define the tangential angle \theta(s)=\int_{c}^{s}\kappa(u)\,\mathrm{d}u , where \kappa(s) is the curvature, s the arc-length parameter and c a real constant. See Figure 1 . We place markers along the curve at points where \theta increases by a fixed step. This method makes it easy to see how curvature changes along a curve. In the left side of Figure 2 , we cut the elastica at its inflection points (where \kappa=0 ) and place markers so that the tangential angle increases by the same amount each time. The markers get closer together where the curve bends more. The right side of Figure 2 plots \theta(s) against the arc length s : equal steps in \theta correspond to uneven steps in s , highlighting that the tangential angle functions as an independent parameter, separate from arc length. These observations are mathematically verified by Theorem 2.5 . Figure 1: Tangential angle \theta as the angle formed by the tangent vector of the curve and the positive x -axis. Inflection points split the curve into colored segments, and the tangential angle \theta is taken separately on each segment. Figure 2: Left: An elastica curve split at inflection points ( \kappa=0 ) with markers placed at equal increments of the tangential angle \theta(s)=\int_{c}^{s}\kappa(u)\,\mathrm{d}u . Right: Plot of \theta(s) versus arc length s , showing that equal steps in \theta correspond to non-uniform steps in s . Next, we extend this idea to surfaces of revolution. As in Figure 3 , along the profile curve, we draw parallel circles at equal \theta intervals, where \theta is a tangential angle parameter of the profile curve (plane curve). These circles are curvature lines on the surface: dense bands indicate regions of high principal curvature, while sparse bands indicate low curvature (Figure 3 ). This observation fact is mathematically verified by Corollaly 3.2 . Furthermore, our method gives a natural segmentation of a surface by parabolic curves and ridge curve. Unlike conventional visualizations that rely on shading, lighting effects, or reflections, our approach conveys geometric structure purely through curvature lines. This unified framework enhances our geometric insight to understand curves and surfaces from their graphics. It also helps guide intuitive design and manufacturing decisions, enables efficient surface segmentation, and removes the arbitrary parameter choices of traditional curvature-line displays—ensuring clear, consistent visualizations. Figure 3: Surface of revolution with the profiles being an Euler spiral. The left figure shows the half part drawn by only curvature lines: especially, parallel circles drawn at equal \theta intervals along the profile curve. Here, the parabolic curve divides the surface into two regions: the elliptic region colored with orange and the hyperbolic region colored with blue. In Section 2, we define the tangential angle parameter for planar curves and demonstrate its effectiveness in visualizing curvature. We show that using this parameter naturally stratifies the curve by vertices and inflection points, and we provide several examples illustrating how curvature affects the distribution of plotted points. In Section 3, we extend this idea to surfaces of revolution. We demonstrate that the tangential angle parameter induces a meaningful coordinate system that highlights geometric features such as ridge and parabolic curves. This framework not only unifies the visualization of curvature across dimensions but also enables consistent and interpretable curvature-based graphics without relying on arbitrary parameter choices. Acknowledgement . This work is partially supported by JSPS KAKENHI Grant Number JP 20K14312, 24K22308 and 24K06722. 2 Tangential angle of plane curve Let \mathbb{R}^{2} be the Euclidian plane equipped with the standard inner product <\cdot,\cdot> and Euclidian norm |\cdot| . Let \gamma\colon I\to\mathbb{R}^{2} be a smooth ( C^{\infty} ) non-singular curve with an open interval I . The parameter s of \gamma is called the arc-length parameter of \gamma , if |\frac{d\gamma}{ds}|=1 holds. Putting e=\frac{d\gamma}{ds} , then the curvature \kappa of \gamma is defined as the function such that \frac{de}{ds}=\kappa\nu, where \nu\colon I\to S is the Gauss map. It is well-known that \frac{1}{\kappa} is the radius of the circle which approximates the curve locally. Definition 2.1 Take J\subset I as an open interval on which \kappa\not=0 holds, and define \theta\colon J\to\theta(J),\;\;\theta(s)=\int^{s}_{c}\kappa(s)ds, with a constant c\in J . The parameter \theta is called the tangential angle of \gamma . Note that \theta is a diffeomorphism since \theta^{\prime}=\kappa\not=0 on J . Fact 2.2 (cf. Proposition 1.20 in [ 2 ] ) \theta is regarded as an angle between the tangent vector e and some axis in the plane. Remark 2.3 In [ 2 ] , the parameter \theta is called the angle of contingence ; and the plane curve \gamma parametrized by \theta is called a unit-angular velocity curve . Note that the point \gamma(t_{0}) with \kappa(t_{0})=0 is called an inflection , where the tangent line have a contact of the order of more than 2 . Thus we can take the tangential