Overcoming Quantum Resistivity Scaling in Nanoscale Interconnects Using Delafossite PdCoO 2

Seoung-Hun Kang, Youngjun Lee, Sangmoon Yoon, Jong Mok Ok, Mina Yoon, Ho Nyung Lee, Young-Kyun Kwon · 2025

Read Overcoming Quantum Resistivity Scaling in Nanoscale Interconnects Using Delafossite PdCoO 2 by Seoung-Hun Kang, Youngjun Lee, Sangmoon Yoon, Jong Mok Ok, Mina Yoon, Ho Nyung Lee, Young-Kyun Kwon (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-13573.txt.

Introduction

Seoung-Hun Kang and six co-authors tested a layered crystal in two thousand twenty-five as a future wire material for tiny chips. Below seven nanometres, copper wires suffer a sharp rise in resistance from quantum confinement. Their candidate, PdCoO2, carries current mostly in flat planes, with much longer free paths in-plane than across planes.

Under the same boundary rules, including a realistic liner for copper, the crystal's resistance rose far more slowly as films thinned, staying near bulk values down to a few nanometres. Two slope changes in its scaling trace back to its split free paths. Measured data matched the curves, backing the crystal for next-generation interconnects.

Catalog record

CREATORSeoung-Hun Kang, Youngjun Lee, Sangmoon Yoon, Jong Mok Ok, Mina Yoon, Ho Nyung Lee, Young-Kyun Kwon
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-13573

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Overcoming Quantum Resistivity Scaling in Nanoscale Interconnects Using Delafossite PdCoO 2 Seoung-Hun Kang, Youngjun Lee, Sangmoon Yoon, Jong Mok Ok, Mina Yoon, Ho Nyung Lee, Young-Kyun Kwon Abstract Continued scaling into the sub-7 nm regime exacerbates quantum-limited resistivity in Cu interconnects. We evaluated layered PdCoO 2 and explicitly benchmarked it against Cu to identify mechanisms that maintain conductivity under confinement. Using a momentum-resolved relaxation-time formalism derived from the conductivity tensor, we link k- and energy-resolved velocities, lifetimes, and mean-free-paths (MFPs) to thickness-dependent resistivity for films and wires. PdCoO 2 exhibits quasi-2D transport with high in-plane velocities and strongly anisotropic MFPs ( ∼ 15 ​ nm \sim 15\,\mathrm{nm} in-plane, ∼ 3 ​ nm \sim 3\,\mathrm{nm} out-of-plane near E F ), whereas Cu shows an isotropic ∼ 22 ​ nm \sim 22\,\mathrm{nm} MFP. Under identical boundary conditions—including a realistic 2 nm liner/diffusion barrier for Cu—PdCoO 2 displays suppressed boundary scattering and a much slower resistivity increase from bulk down to sub-30 nm, preserving near-bulk conductivity and remaining viable at 2 nm. Thickness trends reveal dual slope changes in PdCoO 2 ( ∼ 35 ​ nm \sim 35\,\mathrm{nm} and ∼ 7 ​ nm \sim 7\,\mathrm{nm} ) set by anisotropic MFPs, contrasting with Cu’s single characteristic scale ( ∼ 40 ​ nm \sim 40\,\mathrm{nm} ). The calculated bulk values and scaling curves track available measurements for both materials. These results establish PdCoO 2 as a scalable interconnect that outperforms Cu under quantum confinement and provide a quantitative framework to screen layered conductors for next-generation nanoelectronic interconnects. I Introduction The relentless miniaturization of semiconductor devices toward dimensions below 5 nm has significantly improved computing performance and integration density, driving remarkable advances in electronic technologies Radamson et al. 2024 . However, as device dimensions approach atomic scales, quantum-mechanical phenomena increasingly dominate electron transport, introducing critical new challenges Radamson et al. 2024 ; Badawy and Bakkers 2024 . In particular, traditional interconnect materials such as copper, which exhibit outstanding electrical conductivity at bulk scales, experience a pronounced increase in resistivity at these ultra-thin dimensions due to intensified electron-boundary scattering, grain-boundary effects, and drastically reduced electron mean free paths Pan and Naeemi 2014 ; Graham et al. 2010 ; Gall 2020 . This increase in resistivity severely undermines the signal integrity, power efficiency, and overall performance of nanoscale circuits, presenting a significant barrier to further technological advancement Moon et al. 2023 . Moreover, copper interconnect technology necessitates additional structural complexity, including diffusion barriers and adhesion liners to prevent metal migration into adjacent dielectric layers. The insertion of these barrier and liner materials significantly reduces the effective conductive cross-sectional area of the interconnect, exacerbating resistivity problems and complicating the integration process Steinhögl et al. 2004 . Consequently, the search for alternative materials with inherently superior electrical properties at the nanoscale, as well as reduced integration complexity, has become essential to sustain future semiconductor scaling trends. In this context, delafossite oxide materials, particularly PdCoO 2 , have recently emerged as exceptionally promising candidates to replace traditional metallic interconnects Kim et al. 2024 ; Harada et al. 2025 . Delafossite oxides possess a unique layered crystal structure characterized by alternate metallic and oxide planes, facilitating remarkable electronic transport properties Shannon et al. 1971 ; Mackenzie 2017 . PdCoO 2 , in particular, has garnered considerable attention due to its extraordinary electrical conductivity, rivaling or even exceeding that of conventional metals such as copper and silver. Furthermore, PdCoO 2 exhibits a strongly anisotropic, quasi-two-dimensional (2D) Fermi surface structure, which promotes efficient, directionally confined electron transport parallel to its atomic layers Eyert et al. 2008 ; Mackenzie 2017 . Unlike graphene, another prominent 2D conductor, which suffers from relatively low carrier densities that limit its practical applicability in interconnect technology Wu et al. 2017 , PdCoO 2 uniquely combines a high carrier density with exceptional electron mobility. This advantageous combination not only sustains a superior electrical conduction at reduced dimensions but also significantly mitigates the detrimental impact of quantum confinement effects. Furthermore, PdCoO 2 intrinsically incorporates stable oxide layers, eliminating the need for separate diffusion barriers or liners. As a result, its adoption can maximize the effective conductive area, reduce interconnect complexity, and maintain a lower overall resistivity within integrated circuits, greatly simplifying device fabrication processes. Recent advances in thin-film deposition methods, such as molecular beam epitaxy (MBE), pulsed laser deposition (PLD), and chemical vapor deposition (CVD) have successfully realized high-quality PdCoO 2 thin films, maintaining their bulk-like conductivity and mechanical stability down to ultrathin dimensions Brahlek et al. 2019 ; Harada et al. 2018 . A similar class of delafossites, such as PdCrO 2 and CuCrO 2 have been also sucessfully demonstrated by PLD Ok et al. 2020a ; Ok et al. 2020b . Despite these achievements, critical open questions remain about precisely how thickness reduction affects the quantum-scale resistivity of PdCoO 2 , particularly regarding the interplay between electron-phonon scattering and reduced electron momentum relaxation pathways at ultrathin dimensions. In this study, we systematically investigate the thickness-dependent electrical resistivity of PdCoO 2 using comprehensive first-principles computational methods. Specifically, we rigorously quantify electron-phonon coupling and momentum relaxation times across different electronic bands and momentum states at nanoscale thicknesses, enabling detailed insight into quantum mechanical scattering mechanisms. Our results reveal that PdCoO 2 retains outstanding electrical conductivity even at thicknesses below 5 nm, significantly exceeding copper and other conventional metallic interconnect materials. This robustness arises from the layered quasi-2D transport in PdCoO 2 —high in-plane Fermi velocities and anisotropic mean free paths that suppress boundary scattering along the conducting planes—together with the absence of liner/barrier penalties required for Cu, yielding slower resistivity scaling and bulk-like conductivity down to the few-nanometer regime. This demonstrates the potential of PdCoO 2 to overcome the existing nanoscale resistivity bottleneck, thus positioning it as an enabling breakthrough material for continued CMOS scaling and the development of next-generation nanoscale electronic devices. II Computational details First-principles calculations were performed based on density functional theory (DFT) Kohn and Sham 1965 ; Hohenberg and Kohn 1964 , as implemented in Quantum ESPRESSO Giannozzi et al. 2009 . The plane-wave basis set utilized a kinetic-energy cutoff of 80 Ry, with norm-conserving pseudopotentials and the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation Perdew et al. 1996 for the exchange-correlation functional. Self-consistent ground-state calculations were conducted on a rhombohedral lattice (lattice constant: 6.1535 Å), employing a uniform 12\times 12\times 12 k -point mesh corresponding to a reciprocal-space sampling density of 0.214 Å -1 . Phonon calculations were performed using density functional perturbation theory (DFPT) Baroni et al. 2001 with a 4\times 4\times 4 q -point grid. Electron-phonon (e-ph) interaction matrix elements were subsequently interpolated using maximally localized Wannier functions implemented in the EPW package Pizzi et al. 2020 ; Poncé et al. 2016 , employing finely converged grids of 60\times 60\times 60 for k -points and 10,000 points for q -space sampling (see SI-Fig.S1) Mustafa et al. 2016 . Electrical resistivity was evaluated by solving the Boltzmann transport equation using the BoltzTraP code Madsen and Singh 2006 . Finally, to quantify thickness-dependent resistivity effects in thin films and wires, we utilized our previously developed momentum-resolved relaxation-time approach Lee et al. 2025 . III Results and discussion Figure 1: Crystal structure and electronic properties of PdCoO 2 .

Read the complete text