Bandit-Based Charging with Beamforming for Mobile Wireless-Powered IoT Systems
Chenchen Fu, Zining Zhou, Xiaoxing Qiu, Sujunjie Sun, Weiwei Wu, Song Han · 2025
Read Bandit-Based Charging with Beamforming for Mobile Wireless-Powered IoT Systems by Chenchen Fu, Zining Zhou, Xiaoxing Qiu, Sujunjie Sun, Weiwei Wu, Song Han (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-11971.txt.
Introduction
Chenchen Fu and five co-authors design a smarter way to charge sensor networks by air in a 2025 paper. Wireless power transfer keeps tiny Internet-of-Things devices alive without plugs, and mobile chargers can roam to serve them. But channels shift as the charger moves, and its own battery sets a hard deadline for each round of charging.
Their framework plans each round jointly: where the charger should stop, how long it should linger, and how its beam should be shaped to reach the devices. Dividing the area into cells keeps the planning fast, with guaranteed closeness to the best plan. Two online learning algorithms, built on the bandit idea of learning from each try, then adapt the plan as conditions change. The authors aim the work at real-time charging that respects tight energy budgets.
Catalog record
| CREATOR | Chenchen Fu, Zining Zhou, Xiaoxing Qiu, Sujunjie Sun, Weiwei Wu, Song Han |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 67 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-11971
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Bandit-Based Charging with Beamforming for Mobile Wireless-Powered IoT Systems Thanks: S. Han is with the School of Computing, University of Connecticut, United States (E-mail: [email protected]). Chenchen Fu, Zining Zhou, Xiaoxing Qiu, Sujunjie Sun, Weiwei Wu, Song Han Abstract Wireless power transfer (WPT) is increasingly used to sustain Internet-of-Things (IoT) systems by wirelessly charging embedded devices. Mobile chargers further enhance scalability in wireless-powered IoT (WP-IoT) networks, but pose new challenges due to dynamic channel conditions and limited energy budgets. Most existing works overlook such dynamics or ignore real-time constraints on charging schedules. This paper presents a bandit-based charging framework for WP-IoT systems using mobile chargers with practical beamforming capabilities and real-time charging constraints. We explicitly consider time-varying channel state information (CSI) and impose a strict charging deadline in each round, which reflects the hard real-time constraint from the charger’s limited battery capacity. We formulate a temporal-spatial charging policy that jointly determines the charging locations, durations, and beamforming configurations. Area discretization enables polynomial-time enumeration with constant approximation bounds. We then propose two online bandit algorithms for both stationary and non-stationary unknown channel state scenarios with bounded regrets. Our extensive experimental results validate that the proposed algorithms can rapidly approach the theoretical upper bound while effectively tracking the dynamic channel states for adaptive adjustment. I Introduction IoT systems powered by energy harvesting techniques have drawn growing attention from both academia and industry in recent years. Such systems, particularly those built on embedded platforms, are designed to operate autonomously with minimal human intervention. However, IoT systems face unique constraints, including limited processing power, strict energy budgets, real-time communication requirements, and physical size limitations. These challenges make efficient power management and optimized communication strategies essential for the sustainability and scalability of IoT applications. Compared to harvesting energy from ambient sources [ 1 ] , such as solar, wind, and vibration, which are typically unpredictable and highly variable, a more controllable and stable approach is Radio Frequency (RF)-based Wireless Power Transfer (WPT) [ 2 ] . WPT enables the IoT devices to wirelessly harvest energy from dedicated RF sources, mitigating or even eliminating the need for frequent battery replacements. However, a fundamental limitation of WPT is that RF signal strength decays rapidly with distance, leading to inefficient energy transfer, which is particularly problematic for low-power IoT devices operating in distributed environments [ 3 ] . To address this problem, beamforming techniques play a critical role in enhancing the energy transfer efficiency by concentrating the RF energy on specific direction(s), thus minimizing the energy loss and extending the distance of the energy transfer [ 2 ] . A series of work in the literature focused on beamforming technique design and waveform optimization [ 4 ] for WP-IoT systems with static charger(s). Practical charging algorithms based on beamforming techniques were designed and implemented in [ 3 , 5 ] . However, due to the limited range of wireless power transfer, static chargers have to be deployed in proximity to the target devices. In large-scale IoT systems, it is however economically infeasible to deploy a large number of static chargers in the field to cover all the devices. An effective way to address this problem is to deploy mobile chargers to travel through the field and approach individual devices to provide wireless energy transfer. In recent years, researchers focused on trajectory planning and charging algorithm designs to charge the devices using mobile chargers [ 6 ] . However, in most of these studies, their charging models did not consider the beamforming technique (or over-simplified it), neglected the unstable and dynamic channel conditions, and failed to account for real-time constraints imposed by limited energy budgets , and thus cannot be directly deployed in real-world scenarios. Their common limitations include but are not limited to: 1) not considering the multi-antenna technology to enhance the energy transfer efficiency [ 7 , 8 , 9 , 10 ] ; 2) assuming that the charging power of different beams can be directly additive [ 7 ] ; 3) simplifying the charging region from the irregular droplet shape (see Fig. 1 and Fig. 3 ) to the regular circular shape [ 7 , 8 ] ; and 4) not taking into account the dynamic channel condition (see Section II-A for details), which plays a significant role in most wireless charging problems with either static or mobile chargers [ 7 , 9 , 8 , 11 , 10 , 6 ] . In this work, we study the fundamental problem of effective wireless charging with mobile charger(s) in WP-IoT systems, by utilizing practical beamforming techniques under dynamic channel condition. The objective is to maximize the charging utility for all target devices to avoid starvation and energy overflow problems (see Def. 2 ), while satisfying the real-time charging requirement introduced by the limited battery of the mobile charger(s). As wireless charging suffers severe swings of channel states and low charging efficiency, the mobile charger(s) should stop at carefully determined locations to charge the devices in proximity. At each location, a proper beamforming code word (See Def. 1 ) should be selected to maximize the total charging utility. To achieve this objective, we need to tackle the following key challenges. 1. [Charging objective] As both starvation and energy overflow problems need to be avoided for all devices, the charging objective should be well designed to achieve submodularity 1 1 1 A set function is submodular if it has diminishing returns: adding an item to a smaller set gives more gain than to a larger one. In our case, charging a low-energy sensor brings more utility than charging a well-powered one. ( charging starving devices is more crucial than charging devices with adequate energy ). The objective should also be generally applicable to a variety of real-world systems with unique requirements. Moreover, the limited battery capacity of mobile charger(s) leads to tight time constraints for each charging round. To serve multiple energy-demanding sensor nodes under such constraints, it is crucial to develop effective charging objectives and scheduling strategies that can maximize overall efficiency. 2. [Where to charge] Determining the candidates of charging locations involves segmenting the area into grids. By modelling the power distribution in practical charging beams (See Fig. 3 ), we observe that the power intensity varies significantly even within a single grid. This variation is not uniform or linear as assumed in previous work, but needs to be well analyzed to obtain the approximation ratio introduced by area discretization , which in turn affects the overall efficiency and accuracy of the charging strategy. 3. [How to charge] The target charging problem involves submodular objective function. An oracle to adeptly handle this submodular charging problem, and the bandit schemes with tight regret bound are not analyzed in the literature and remains an open problem . Novel bandit schemes and the regret bounds should be well designed and analyzed based on the new oracle, ensuring that the approach is not only theoretically grounded but also pragmatically viable. To the best of our knowledge, this work is the first attempt to explore the wireless charging problem in WP-IoT systems with mobile charger(s) based on practical beamforming model. The contributions are summarized below. • We analyze the key features of