Liquid Crystal-Based RIS Loss-Trade-Off Analysis Wang, Delbari and Jamali’s work was supported in part by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) within the Collaborative Research Center MAKI (SFB 1053, Project-ID 210487104) and in part by the LOEWE initiative (Hesse, G
Bowu Wang, Mohamadreza Delbari, Robin Neuder, Alejandro Jiménez-Sáez, and Vahid Jamali · 2025
Read Liquid Crystal-Based RIS Loss-Trade-Off Analysis Wang, Delbari and Jamali’s work was supported in part by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) within the Collaborative Research Center MAKI (SFB 1053, Project-ID 210487104) and in part by the LOEWE initiative (Hesse, G by Bowu Wang, Mohamadreza Delbari, Robin Neuder, Alejandro Jiménez-Sáez, and Vahid Jamali (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-11489.txt.
Introduction
Smart surfaces that steer radio beams could cut the power future wireless networks need. Five authors study versions built with liquid crystals in a delay-line design, where each element shifts the signal's phase by a tunable amount. A basic tension has gone unexamined for these surfaces: widening the phase range a shifter can reach also raises the signal loss it causes.
The team sets up a network with a base station and one such surface, then works out how to serve several users at a set quality level with the least transmit power. Their simulations trace a clear trade-off: the phase range chosen for the surface moves the balance between total transmit power and the data rate users can reach. The results give designers a map of that trade-off when planning liquid crystal surfaces for millimeter-wave systems.
Catalog record
| CREATOR | Bowu Wang, Mohamadreza Delbari, Robin Neuder, Alejandro Jiménez-Sáez, and Vahid Jamali |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-11489
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Liquid Crystal-Based RIS Loss-Trade-Off Analysis Wang, Delbari and Jamali’s work was supported in part by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) within the Collaborative Research Center MAKI (SFB 1053, Project-ID 210487104) and in part by the LOEWE initiative (Hesse, Germany) within the emergenCITY Centre under Grant LOEWE/1/12/519/03/05.001(0016)/72. Neuder and Jiménez-Sáez’s work was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 287022738 – TRR 196 MARIE within project C09. Bowu Wang, Mohamadreza Delbari, Robin Neuder, Alejandro Jiménez-Sáez, and Vahid Jamali Abstract Liquid crystal (LC) technology has emerged as a promising solution for large reconfigurable intelligent surfaces (RISs) at millimeter wave (mmWave) bands, offering advantages such as low power consumption, scalability, and continuously tunable phase shifts. For LC - RIS based on the delay-line architecture, i.e., with dedicated phase shifters, there exists a trade-off between the maximum achievable phase-shift range and the corresponding insertion loss, which has not been studied for LC - RIS -assisted wireless systems yet. In this paper, we investigate this trade-off where a base station (BS) and an RIS are configured to minimize the transmit power while satisfying a given quality of service (QoS) for a number of users. Simulation results reveal a fundamental trade-off between the total transmit power and the achievable data rate as a function of the LC phase-shift range. I Introduction Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology to enhance wireless communication performance by enabling programmable and energy-efficient manipulation of electromagnetic waves. Liquid crystal (LC) -based implementations of RIS offer significant advantages, such as low power consumption, cost efficiency, and the ability to achieve continuously tunable phase shifts particularly for high frequency bands [ 1 ] . However, there is a trade-off for delay-line architecture LC-based phase shifters between the maximum achievable phase-shift range and the associated insertion loss [ 2 , 3 ] . In particular, shorter phase shifter lengths reduce insertion loss but also constrain the maximum achievable phase shift, which can fall below the full 2\pi range and negatively impact the performance. Several studies in the literature have investigated the energy efficiency of RIS -assisted wireless communications in general. For example, [ 4 ] introduced a framework for optimizing the energy efficiency of RIS -assisted networks, showing that the joint optimization of transmit power and RIS phase shifts is crucial for mitigating hardware-related power consumption. This theoretical foundation was later confirmed in experimental evidence by [ 5 ] , who conducted extensive measurements and developed path loss models that empirically confirmed the impact of real-world reflection losses. More recent analyses, such as that by [ 6 ] , have advanced this line of inquiry by explicitly modeling performance degradation caused by phase-dependent insertion loss. To address these intrinsic losses in passive surfaces, alternative architectures have been proposed; for instance, [ 7 ] investigated active, power-amplifying RIS designs that offset losses at the expense of increased on-device power consumption, thereby revealing another dimension of the same fundamental trade-off. To the best of the authors’ knowledge, this trade-off has not been investigated in LC - RIS -assisted wireless communications yet. In this work, we investigate the loss performance trade-off in LC-RIS-assisted wireless communication systems. We formulate a power minimization algorithm that dynamically adjusts the RIS phase shifts while accounting for the insertion loss and restricted phase-shift range. Simulation results demonstrate that there exists an LC phase shifter length that achieves the scenario-dependent optimal trade-off between the total transmission power and the data rate, thus enabling energy-efficient wireless communications with LC-RIS. Notation: Bold capital and small letters are used to denote matrices and vectors, respectively. (\cdot)^{\mathsf{T}} , (\cdot)^{\mathsf{H}} , \mathrm{rank}(\cdot) , and \mathrm{tr}(\cdot) denote the transpose, Hermitian, rank, and trace of a matrix, respectively. Moreover, \mathrm{diag}(\mathbf{A}) is a vector that contains the main diagonal entries of matrix \mathbf{A} . \|\mathbf{A}\|_{*}=\sum_{i}\sigma_{i} , \|\mathbf{A}\|_{2}=\max_{i}\sigma_{i} , \|\mathbf{A}\|_{F} , and \bm{\lambda}_{\max}(\mathbf{A}) denote the respectively nuclear, spectral, and Frobenius norms of a Hermitian matrix \mathbf{A} , and eigenvector associated with the maximum eigenvalue of matrix \mathbf{A} , where \sigma_{i},\,\,\forall i , are the singular values of \mathbf{A} . Furthermore, [\mathbf{A}]_{m,n} and [\mathbf{a}]_{n} denote the element in the m th row and n th column of matrix \mathbf{A} and the n th entry of vector \mathbf{a} , respectively. Moreover, \mathbb{R} and \mathbb{C} represent the sets of real and complex numbers, respectively, and \mathsf{j} is the imaginary unit. \mathbb{E}\{\cdot\} is expectation and \mathcal{CN}(\bm{\mu},\bm{\Sigma}) denotes a complex Gaussian random vector with mean vector \bm{\mu} and covariance matrix \bm{\Sigma} . \mathrm{rand}(N) denotes a N\times 1 vector where each element is generated independently and uniformly from 0 to 1. Finally, \mathcal{O}(\cdot) represents the big-O notation and |\mathcal{P}| is the cardinality of set \mathcal{P} . II System, Channel, and Data Rate Models In this section, we first present the system model for the mobile user (MU) . We then describe the channel model, followed by the data rate model, which serves as the MU ’s performance metric. II-A System Model We consider a narrow-band downlink system with a base station (BS) employing N_{t} antennas, an RIS with N LC-based unit cells and K single-antenna MUs . The MUs are served in a time-division multiple-access (TDMA) scheme 1 1 1 In this paper, we do not address the time required for LC - RIS configuration [ 8 ] ; instead, our focus is solely on the loss-related trade-off. . The received signal at k th MU in their allocated time slot is given by: y_{k}=\left(\mathbf{h}_{d,k}^{\mathsf{H}}+\mathbf{h}_{r,k}^{\mathsf{H}}\bm{\Gamma}_{k}\mathbf{H}_{t}\right)\mathbf{x}_{k}+n_{k},\forall k=1,\cdots,K, (1) where \mathbf{x}_{k}\in\mathbb{C}^{N_{t}} is the transmit signal vector for the k th MU , y_{k}\in\mathbb{C} is the received signal vector at the k th MU , and n_{k}\in\mathbb{C} represents the additive white Gaussian noise (AWGN) at the k th MU , i.e., n_{k}\sim\mathcal{CN}(0,\sigma_{n}^{2}),\,\forall k , where \sigma_{n}^{2} is the noise power. Assuming linear beamforming, the transmit vector \mathbf{x}_{k} can be written as \mathbf{x}_{k}=\mathbf{q}_{k}s , where \mathbf{q}_{k}\in\mathbb{C}^{N_{t}} is the beamforming vector on the BS for k th MU and s\in\mathbb{C} is the data symbol. Assuming \mathbb{E}\{|s|^{2}\}=1 , the beamformer satisfies the transmit power constraint \|\mathbf{q}_{k}\|^{2}\leq P_{k},\,\forall k with P_{k} denoting the maximum required transmit power for k th MU . Moreover, \mathbf{h}_{d,k}^{\mathsf{H}}\in\mathbb{C}^{N_{t}},\mathbf{H}_{t}\in\mathbb{C}^{N\times N_{t}} , and \mathbf{h}_{r,k}^{\mathsf{H}}\in\mathbb{C}^{N} denote the BS - MU , BS - RIS , and RIS - MU channel matrices, respectively. The RIS reflection matrix is \bm{\Gamma}_{k}=\mathrm{diag}([\bar{\bm{\Gamma}}_{k}]_{n}e^{j[\bm{\omega}_{k}]_{n}})\in\mathbb{C}^{N\times N} , where [\bm{\omega}_{k}]_{n} is n th element phase shifter for k th MU and [\bar{\bm{\Gamma}}_{k}]_{n} denotes the amplitude of n th RIS element for k th MU and accounts for the loss. II-B Channel Model For extremely large RISs , the distances between the RIS and both the BS and the MU may fall within the near-field (NF) regime of the RIS [ 9 ] . Consequently, an NF channel model is adopted. Moreover, RISs are typically installed at elevated heights, ensuring line of sight (LOS) connectivity between the RIS and both the BS and the MUs . The use of high-frequency bands further strengthens the dominance of LOS links over non-LOS (nLOS) links. As a result, the channels are modeled using Rician fading with a high K -factor, representing the strong contribution of LOS components relative to nLOS components. For clarity, we present the model for a general \mathbf{H}\in\mathbb{C}^{N_{\mathrm{rx}}\times N_{\mathrm{tx}}} , where N_{\mathrm{tx}}