Hole doping as an efficient route to increase the Curie temperature in monolayer CrI 3
Marko Orozović, Božidar N. Šoškić, Silvia Picozzi, Željko Šljivančanin, Srdjan Stavrić · 2025
Read Hole doping as an efficient route to increase the Curie temperature in monolayer CrI 3 by Marko Orozović, Božidar N. Šoškić, Silvia Picozzi, Željko Šljivančanin, Srdjan Stavrić (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-11397.txt.
Introduction
Marko Orozović and co-authors show, in twenty twenty-five, that adding holes can raise the magnetic ordering temperature of an atom-thin magnet. Two-dimensional magnets offer atomic-scale control of magnetism. The team studied monolayer chromium triiodide, a prototype layered ferromagnet, with a multi-scale theory: density functional calculations, spin models, and orbital analysis. Charge doping, done by gating or charge transfer, tunes the exchange forces between spins and the spin-orbit effects that set direction. Hole doping proved remarkably efficient at strengthening both.
In the undoped sheet, symmetric exchange governs ordering. When hole-doped, directional terms grow to rival it. At high hole levels, the Curie temperature, where magnetism fades, can pass two hundred kelvin. The work shows how anisotropy engineering can stabilize warm magnetic order.
Catalog record
| CREATOR | Marko Orozović, Božidar N. Šoškić, Silvia Picozzi, Željko Šljivančanin, Srdjan Stavrić |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-11397
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Hole doping as an efficient route to increase the Curie temperature in monolayer CrI 3 Marko Orozović, Božidar N. Šoškić, Silvia Picozzi, Željko Šljivančanin, Srdjan Stavrić Abstract Two-dimensional van der Waals (vdW) magnets offer unprecedented opportunities to control magnetism at the atomic scale. Through charge carrier doping—realized by electrostatic gating, intercalation/adsorption, or interfacial charge transfer—one can efficiently tune exchange interactions and spin-orbit-induced effects in these systems. In this work, through a multi-scale theoretical framework combining density functional theory, spin Hamiltonian modeling, and Wannier-function analysis, we choose monolayer CrI 3 to unravel how carrier doping affects the isotropic as well as anisotropic exchange interactions in this prototypical vdW ferromagnet. The remarkable efficiency of hole doping in enhancing ferromagnetic exchange and magnetic anisotropy found in our study was explained through orbital-resolved analysis. Crucially, we demonstrated that unlike the undoped system—where isotropic exchange interactions govern magnetic long-range order—the hole-doped CrI 3 exhibits anisotropic terms comparable in magnitude to isotropic ones. Finally, we show that a high concentration of holes in a CrI 3 monolayer can increase its Curie temperature above 200 K. This work advances our understanding of doping-controlled magnetism in semiconducting 2D materials, demonstrating how anisotropy engineering can stabilize high-temperature magnetic order. I Introduction The discovery of ferromagnetic order in the ultrathin limit of layered van der Waals (vdW) materials CrI 3 Huang2017Jun and CrGeTe 3 Gong2017Jun ignited a decade of intense research on two-dimensional (2D) magnets. Building on these initial discoveries, recent studies estimate that more than 800 vdW materials may exhibit long-range magnetic order down to the monolayer limit Gjerding2021Jul . Among these, more than two dozen have been experimentally synthesized so far Park2025May . Besides ferromagnetism (FM) and antiferromagnetism (AFM), vdW materials can host altermagnetism Milivojevic2024May ; Sodequist2024May as well as various noncollinear magnetic textures like skyrmions Amoroso2020Nov ; Zhang2022Mar , merons Lu2020Oct ; Augustin2021Jan or both Casas2023Apr . Furthermore, multiferroic vdW materials that have coupled magnetic and ferroelectric properties enable electrical control of their magnetic properties, such as that recently achieved with p -wave magnetic ordering in type-II vdW multiferroic NiI 2 Song2022Feb ; Song2025Jun . Therefore, having at our disposal ultrathin vdW materials that can host various kinds of magnetic phases and textures, as well as those with cross-coupled magnetic and ferroelectric properties, the time seems ripe for all-2D spintronics devices Zhong2025Feb ; Gong2025May . The realization of practical 2D spintronic devices requires 2D crystals that exhibit stable magnetic order at temperatures exceeding room temperature. In fact, several 2D magnets already satisfy this requirement. For example, room-temperature ferromagnetism is confirmed by the observation of magnetic hysteresis at 330\,{\rm K} in {\rm VSe_{2}} Bonilla2018Apr and at 300\,{\rm K} in {\rm MnSe_{2}} O'Hara2018May monolayers. In a Cr 3 Te 4 monolayer, x-ray magnetic circular dichroism measurements revealed a critical temperature (T_{\rm c}) of 344\,{\rm K} with an out-of-plane magnetic easy axis Chua2021Oct . The T_{\rm c} of a Fe 3 GaTe 2 2D crystal was estimated at \sim 350–380\,{\rm K} , which was at a time a record-high T_{\rm c} for intrinsic 2D vdW ferromagnetic crystals. However, the room-temperature T_{\rm c} values are exclusively reported for itinerant 2D ferromagnets, whereas semiconducting 2D ferromagnets exhibit significantly lower T_{\rm c} . For instance, the widely studied CrI 3 and CrGeTe 3 have T_{c} values of 45 and 42 K, respectively. To enhance the T_{c} in 2D magnetic semiconductors and especially in CrI 3 , various strategies have been proposed in recent years. In the work of Zhang et al. Zhang2021Mar it is argued that defect engineering—creating Cr and I atomic vacancies in CrI 3 —should result with a 2D system possessing higher T_{\rm c} , although no concrete T_{\rm c} value has been reported. Chen et al. have predicted that CrI 3 /MoTe 2 heterostructure should exhibit T_{\rm c}\sim 60\,{\rm K} , with further increase up to 85\,{\rm K} that can be reached by decreasing interlayer distance Chen2019Jul . Surface functionalization has also been proposed as an efficient means to increase T_{\rm c} in 2D magnets. For instance, adsorption of halogen atoms (F, Cl, Br) on CrI 3 is predicted to increase T_{\rm c} up to \sim 220\,{\rm K} Li2021Mar ; the Li adsorption can lead to T_{\rm c}\sim 150\,{\rm K} at 12.5\% Li coverage Xu2020Oct ; the substitutional doping of I with Se impurities can increase the T_{\rm c} up to \sim 250\,{\rm K} ; the adsorption of transition metals Sc and V can lead to a nearly threefold increase in T_{\rm c} Yang2021May . Among the suggested strategies to increase the T_{\rm c} in CrI 3 charge carrier doping has emerged as a particularly promising one. Wang et al. Wang2016Jun predicted that hole doping raises T_{\rm c} by introducing itinerant carriers that strengthen the FM exchange between localized Cr magnetic moments. While their calculations also suggested a modest T_{\rm c} enhancement under electron doping, the effect was predicted to be significantly weaker than in the hole-doping counterpart. Experimental validation of these predictions was provided by Jiang et al. Jiang2018Jul , who demonstrated that electrostatic gating of a single CrI 3 layer enhances T_{\rm c} by 20% at a concentration of \sim 0.11 holes per unit cell. In contrast, electron doping was found to suppress T_{\rm c} —a result that contradicts initial theoretical expectations. First-principles calculations by Singh et al. Singh2021Jun resolved this discrepancy by showing that electron doping induces tensile strain in CrI 3 , counteracting the electronic enhancement of ferromagnetic exchange and leading to an overall suppression of exchange interactions at higher doping concentrations. Moreover, the calculations by Singh et al. reproduce the significant enhancement of T_{c} in hole-doped CrI 3 and pinpoint key contributing factors. However, a full microscopic explanation is still lacking—particularly regarding the stark electron-hole doping asymmetry. In this theoretical study, we present a comprehensive investigation of electron- and hole-doping effects on the electronic and magnetic properties of monolayer CrI 3 , with particular emphasis on their impact on T_{\rm c} . Through orbital-resolved analysis of exchange interactions, we identify the specific interaction channels affected by carrier doping. Given the critical role of magnetic anisotropy in stabilizing long-range order in 2D magnets Mermin1966Nov , we systematically evaluate the doping-induced changes in single-ion anisotropy (SIA) and in both the isotropic and anisotropic exchange-terms beyond nearest neighbors, which increase substantially when itinerant carriers are introduced in a semiconducting CrI 3 monolayer. Additionally, we compute the doping-induced changes in magnetic anisotropy energy (MAE), which encompasses all anisotropic contributions, and demonstrate why, in the case of hole doping, the SIA counteracts the overall increase in MAE. Our calculations explain the superior efficiency of hole doping over electron doping for enhancing the ferromagnetic exchange and magnetic anisotropy in the CrI 3 monolayer and consequently increasing T_{\rm c} , which is of both fundamental and technological significance. II Computational Methodology II.1 Model spin Hamiltonian To study the magnetic properties of {\rm CrI_{3}} monolayer, we use a generalized model of the bilinear spin Hamiltonian, \mathcal{H}=-\sum^{{}_{1,2,3}}_{i<j}{\bf S}_{i}\mathcal{J}_{ij}{\bf S}_{j}-\sum_{i}{\bf S}_{i}\mathcal{A}_{ii}{\bf S}_{i}. (1) The spins {\bf S}_{i}=(S_{i,x},S_{i,y},S_{i,z}) are classical pseudovectors with magnitude S=3/2 distributed over honeycomb lattice sites i . We adopt the convention where positive (negative) values of the exchange parameter J correspond to FM (AFM) coupling. The ” 1,2,3 ” symbol above the