Feasibility of proton bunch compression in an operational high-power accelerator

A. Hoover, V. Morozov, A. Narayan, M. Piller Oak Ridge National Laboratory, Oak Ridge, TN, USA · 2025

Read Feasibility of proton bunch compression in an operational high-power accelerator by A. Hoover, V. Morozov, A. Narayan, M. Piller Oak Ridge National Laboratory, Oak Ridge, TN, USA (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-11223.txt.

Introduction

Austin Hoover and co-authors test whether a working proton accelerator can squeeze its bunches far shorter in a 2025 paper. A future muon collider needs its proton driver to compress bunches to an extreme degree, something no running facility has tried. The Spallation Neutron Source holds record-intense proton bunches, making it the natural test bed.

The team compares the neutron source's running settings with the collider's design needs. They survey the radio-frequency system that would perform the squeeze and the diagnostics available in the storage ring. Early simulations and beam experiments gauge whether the scheme can be studied there at all. The paper lays the groundwork for a hands-on feasibility program.

Catalog record

CREATORA. Hoover, V. Morozov, A. Narayan, M. Piller Oak Ridge National Laboratory, Oak Ridge, TN, USA
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE13 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-11223

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Feasibility of proton bunch compression in an operational high-power accelerator Thanks: This manuscript has been authored by UT-Battelle, LLC, under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains, and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan) A. Hoover, V. Morozov, A. Narayan, M. Piller Oak Ridge National Laboratory, Oak Ridge, TN, USA Abstract A muon collider (MC) would require a high-power proton driver to generate intense muon beams at the start of the accelerator chain. Like other high-power facilities, the driver would accumulate intense proton bunches via charge-exchange injection from a linac into a ring. However, unlike other facilities, the MC would require an extreme longitudinal compression of the bunch. We aim to experimentally study the proposed compression scheme at the Spallation Neutron Source (SNS), which boasts a world-leading proton bunch intensity. In this paper, we describe the operating parameters of the SNS compared to the MC design, the capabilities of the current RF system, and the available beam diagnostics in the SNS accumulator ring. We also present initial simulations and experiments to judge the feasibility of the proposed research. 1 Introduction A muon collider (MC) would require a high-power proton driver (PD) to generate intense muon beams at the start of the accelerator chain [ 1 ] . Like other high-power facilities, the PD would accumulate intense proton bunches via charge-exchange injection from an H- ion linac into a ring. However, unlike other facilities, the MC would require an extreme longitudinal compression of the bunch to a few nanoseconds in length. Although the proposed compression scheme is straightforward, the envisioned beam power (2-4 MW), energy (5-10 GeV), repetition rate (10 Hz), and compressed bunch length (2 ns) would lead to an unprecedented charge density that could excite various resonances and instabilities, possibly leading to beam loss. The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) is a close analogue of the PD and could be used to experimentally test the bunch formation process at high space charge intensities [ 2 ] . This paper begins to investigate the feasibility of such experiments. In the following sections, we describe the SNS accelerator layout, operational parameters, and available beam diagnostics. We then discuss a set of initial simulations and experiments performed at the SNS in the past year. Finally, we mention several collective effects that could influence the beam dynamics during compression. 2 SNS facility and diagnostics A diagram of the SNS accelerator is shown in Fig. 1 . Figure 1 : Overview of the SNS accelerator. The SNS generates neutrons by colliding intense proton pulses with a liquid mercury target. Each so-called macropulse on the target is the superposition of over 1000 minipulses injected from a 400-meter linear accelerator (linac) into a 250-meter accumulator ring (AR) at 1.3 GeV energy. The accumulated beam is extracted and transported from the ring to the target in a 150-meter Ring-Target Beam Transport (RTBT). The SNS operates at a world-leading 1.8 MW beam power at 60 Hz repetition rate, with plans ramp the power from 1.8 to 2.8 MW over the next few years [ 3 ] . Figure 2 shows the space charge perveance Q\propto\lambda/\beta^{2}\gamma^{3} (where \lambda is the longitudinal charge density and \beta , \gamma are the relativistic factors) as a function of the beam energy at 2.8 MW beam power. The dashed line on the far right shows the nominal bunch length in the ring, while the line on the left shows an estimated minimum bunch length after compression. At the nominal beam energy of 1.3 GeV, strong compression would begin to probe the MC space charge regime. The SNS can also lower the beam energy to 0.8 GeV by shutting off cavities at the end of the linac. At this lower energy, moderate to strong compression could probe the full range of possible space charge intensities in the MC. Figure 2 : Space charge perveance vs. bunch length in the SNS at 2.8 MW beam power. The grey region is an estimated range for the MC proton driver at peak bunch compression. A suite of diagnostics is available to measure the beam in the SNS accumulator ring (AR). In addition to beam position monitors (BPMs) and beam loss monitors (BLMs), an electron scanner [ 4 ] provides instant turn-by-turn beam profiles along the x and y axes. The AR also hosts a beam instability monitor (BIM) [ 5 ] to measure fast-rising beam instabilities and a beam current monitor (BCM) to measure the longitudinal charge distribution on each turn. After the ring, four wire scanners (WS) provide slow but stable measurements of the one-dimensional transverse charge distribution along the horizontal, vertical, and diagonal axes at different locations in the RTBT. These wire scanners constrain both the two- and four-dimensional phase space distribution [ 6 ] , which can be estimated with tomographic methods. These diagnostics could provide a detailed, time-dependent view of the bunch during compression. 3 Bunch compression methods The PD will utilize a quarter rotation in longitudinal phase space to compress the accumulated proton bunch. For a small-amplitude particle in a harmonic radiofrequency (RF) cavity, the synchrotron tune \nu_{z} is given by Ref. [ 7 ] \nu_{z}=\sqrt{\frac{hqV|\eta_{0}|}{2\pi\beta^{2}E}}, (1) where q is the particle charge, E is the kinetic energy, \beta is the velocity relative to the speed of light, V is the RF voltage, h is the RF harmonic number, and \eta_{0} is the first-order slip factor linearly relating fractional changes in the revolution frequency f to changes in longitudinal momentum p . High-power cavities and specially designed transverse optics will be used to maximize the synchrotron tune and compress the bunch in as few as tens of turns [ 1 ] . The compression factor is determined by the initial distribution, which ideally has minimal energy spread and is confined to the linear portion of the RF bucket. The accumulator ring will be designed to optimize these initial beam parameters. Let us now examine whether the proposed bunch compression scheme could be tested in the SNS. The SNS employs dual-harmonic ( h\in\{1,2\} ) RF focusing in the ring. Two out of four available cavities are used during production, each providing voltages of 6-7 kV. If both h=1 cavities were set to their maximum voltage of 10 kV, a quarter synchrotron oscillation would be possible in approximately 400-600 turns, depending on the beam energy. It may be possible to increase the rotation speed by running all four cavities at the same h=1 harmonic. Thus, compression is possible, but it will be much slower than in the MC. The maximum compression factor in the SNS will depend on the initial (accumulated) beam distribution. A small initial energy spread can be maintained during accumulation using barrier (square well) RF waveforms [ 8 ] . There may be room to install a barrier cavity

Read the complete text