An automated, self-calibration based pipeline for high-fidelity solar imaging with LOFAR: SIMPL

S. Dey, D. Oberoi, P. Zucca, M. Mancini, D. Patra, D. Kansabanik · 2025

Read An automated, self-calibration based pipeline for high-fidelity solar imaging with LOFAR: SIMPL by S. Dey, D. Oberoi, P. Zucca, M. Mancini, D. Patra, D. Kansabanik (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-10619.txt.

Introduction

Soham Dey and co-authors built an automatic pipeline that turns raw solar radio data into clean images in a 2025 paper. The LOFAR array views the Sun at low radio bands with fine detail. Solar bursts swing wildly in brightness, and the upper air warps the signals, so hand work is slow.

Their pipeline, called SIMPL, cuts interference, calibrates the data, and refines itself in loops with no hand steps. Image sharpness rose by more than tenfold over prior work. The tool now crunches a decade of past solar views into ready files. Studies of quiet Sun, faint signals, and sudden bursts all stand to gain.

Catalog record

CREATORS. Dey, D. Oberoi, P. Zucca, M. Mancini, D. Patra, D. Kansabanik
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE56 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-10619

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

An automated, self-calibration based pipeline for high-fidelity solar imaging with LOFAR: SIMPL S. Dey, D. Oberoi, P. Zucca, M. Mancini, D. Patra, D. Kansabanik Abstract Context. The LOw Frequency ARray (LOFAR) is capable of imaging spectroscopy of the Sun in the 10–240 MHz frequency range, with high spectral, temporal, and spatial resolution. However, the complex and rapidly varying nature of solar radio emission – spanning several orders of magnitude in brightness further exacerbated by the strong ionospheric phase distortions during daytime observations, poses major challenges for calibration, imaging, and automation. Aims. We aim to develop a fully automated, high-fidelity imaging pipeline optimized for LOFAR solar observations, capable of handling the intrinsic variability of solar emission and producing science-ready images with minimal human intervention. Methods. We have built the Solar Imaging Pipeline for LOFAR (SIMPL), which integrates excision of radio-frequency interference (RFI) for the solar-specific scenarios, calibration strategies, and self-calibration. The pipeline is designed to enable scalable and uniform processing of large archival datasets. Results. SIMPL achieves more than an order-of-magnitude improvement in imaging dynamic range compared to previous efforts and reliably produces high-quality spectroscopic snapshot images. It has been tested across a wide range of solar conditions. It is currently being employed to process a decade of LOFAR solar observations, providing science-ready FITS images for the community and enabling both comprehensive and novel studies of solar radio phenomena – ranging from quiet Sun emission and faint non-thermal features to active regions and their associated dynamic events, such as transient bursts. 1 Introduction Imaging the radio Sun with high fidelity is an intrinsically challenging endeavour. The solar corona is a complex, dynamic and magnetized plasma environment that produces radio emissions across a broad range of angular scales and emission mechanisms. These emission mechanisms give rise to brightness temperature ( T_{B} ) that can vary many orders of magnitude over small time and frequency intervals ( Kansabanik 2022 , e.g.,) that span a vast range of angular scales. At meter wavelengths, for instance, thermal bremsstrahlung from the quiescent Sun typically shows T_{B}\sim 10^{6} K ( Mercier & Chambe 2015 ; Oberoi et al. 2017 ; Vocks et al. 2018 , e.g.,) . In stark contrast, coherent emission processes, often triggered by flare-accelerated electron beams, can generate extreme type III bursts with T_{B} soaring beyond 10^{11} K ( Melrose 1989 ; Saint-Hilaire et al. 2013 , e.g.,) . Capturing these emissions covering an immense dynamic range is further complicated by their rapid spectro-temporal evolution on sub-second timescales with fractional bandwidths \delta\nu/\nu_{0}\ll 1 ( Ratcliffe et al. 2014 ; Clarkson et al. 2023 , e.g.,) . Consequently, achieving a comprehensive understanding of coronal dynamics necessitates high-fidelity spectroscopic snapshot imaging capable of “freezing” these rapid changes in both time and frequency. The challenge is exacerbated by the frequent superposition of diverse morphological structures, ranging from intensely bright, compact bursts to faint, diffuse background emissions ( Kansabanik 2022 ; Dey et al. 2025 , e.g.,) . Furthermore, the Sun’s extreme flux density compared to typical calibrator sources introduces significant complexities in achieving robust calibration ( Mondal et al. 2019 ; Kansabanik 2022 ; Kansabanik et al. 2022 , e.g.,) . Historically, these limitations, compounded by the capabilities of earlier instruments, meant that radio imaging studies of the dynamic solar emission were often restricted to the brightest emission sources at a few discrete frequencies ( McLean & Labrum 1985 ; Pick & Vilmer 2008 ; Nindos 2020 , e.g. see numerous examples in) . Investigations of the much fainter quiet Sun, conversely, usually necessitated integration times spanning many hours ( Mercier & Chambe 2009 ; Zhang et al. 2022a , e.g.,) . Even with an advanced instrument like the LOw Frequency ARray (LOFAR; van Haarlem et al. 2013 ), imaging studies often focused on the brightest events or relied on long integrations. The advent of new-generation metric radio interferometers, including LOFAR (operating in the 10–90 MHz and 110–240 MHz bands), the Long Wavelength Array at the Owens Valley Radio Observatory (OVRO-LWA; Anderson et al. 2018 ; Hallinan et al. 2023 ; 12-85 MHz), and the Murchison Widefield Array (MWA; Tingay et al. 2013 ; Wayth et al. 2018 ; 80–300 MHz), driven by enormous advances in digital signal processing and computational power, represents a significant leap in instrumental capabilities. These instruments are exceptionally well-suited for solar imaging with high temporal and spectral resolution at low radio frequencies and are already yielding a wealth of interesting scientific results ( Morosan et al. 2015 ; Morosan et al. 2019 ; Suresh et al. 2017 ; Zucca et al. 2018 ; Zucca et al. 2025 ; McCauley et al. 2019 ; Mohan et al. 2019 ; Mondal et al. 2020a ; Mondal et al. 2020b ; Mondal et al. 2023 ; Chhabra et al. 2021 ; Sharma et al. 2022 ; Bhunia et al. 2023 ; Oberoi et al. 2023 ; Kansabanik et al. 2024 ; Dey et al. 2025 , e.g.,) . Dynamic imaging spectroscopy with LOFAR, for example, has begun to unveil previously unseen burst morphologies, such as spatially resolved radio signatures of electron beams in coronal shocks ( Zhang et al. 2024 ) and images of intricate fine structures seen in dynamic spectra associated with type III bursts ( Dabrowski et al. 2025 ) . With more than a decade of such LOFAR observations —- more than 2200 hours spanning Solar Cycles 24–25 now archived, the sheer volume of this information-rich data makes manual analysis impractical. A fully automated and robust pipeline is therefore essential for the uniform processing of this extensive dataset and for enabling crucial long-term statistical studies. In this work, we present Solar IMaging Pipeline for LOFAR (SIMPL) – a fully automated and robust calibration and imaging pipeline specifically designed for solar radio observations with LOFAR. SIMPL integrates solar-specific Radio Frequency Interference (RFI) mitigation techniques, tailored calibration strategies, and a self-calibration framework optimized for the Sun’s complex and dynamic emission. Together, these enable the generation of high-fidelity spectroscopic snapshot images, significantly improving the dynamic range and fidelity of LOFAR solar radio images. The pipeline is currently being employed to systematically process over a decade of solar interferometric observations, to provide science-ready FITS files that can be accessed on demand by the broader solar physics community. The paper is organized as follows. Section 2 provides a brief overview of the LOFAR instrument and its solar observing modes. Section 3 outlines the challenges in calibration and imaging of solar observations at low radio frequencies. In Section 4 , we review existing solar imaging pipelines for LOFAR and their limitations. Section 5 presents the algorithmic design of SIMPL. Results demonstrating the pipeline’s performance are shown in Section 6 . Section 7 describes the integration of the pipeline to the existing LOFAR processing framework, and finally, Section 8 outlines directions for future development, followed by conclusions in Section 9 . 2 LOFAR LOFAR is a state-of-the-art interferometer operating across the 10-240 MHz frequency range. It comprises 38 stations in the Netherlands and 14 international stations across Europe. Out of the 38 Dutch stations, 24 stations are located within \sim 2 km at Exloo. This cluster of stations is referred to as the ‘‘core’’. Each station hosts two co-located

Read the complete text