Compressible boundary layers over isotropic porous surfaces
Ludovico Fossà, Pierre Ricco · 2025
Read Compressible boundary layers over isotropic porous surfaces by Ludovico Fossà, Pierre Ricco (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-10422.txt.
Introduction
Ludovico Fossà and Pierre Ricco study compressible boundary layers over porous surfaces in a 2025 paper. Air at speed skims a bed modeled as a grid of cubes. Averaged balance laws govern the flow in and above the bed.
A self similar solution from past work gains heat and squeeze terms. The speed profile bends at the bed face, then fades to zero below. High porosity, large grains, and fast flow cut the face shear a lot. Recovery heat at the face drops in marked steps too. Heat set at the bed floor barely moves the shear. Porous skins may cool and calm fast craft surfaces.
Catalog record
| CREATOR | Ludovico Fossà, Pierre Ricco |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 63 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2508-10422
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Compressible boundary layers over isotropic porous surfaces Ludovico Fossà, Pierre Ricco Abstract A compressible laminar boundary layer developing over an isotropic porous substrate is investigated by asymptotic and numerical methods. The substrate is modeled as an array of cubes. The momentum and enthalpy balance equations are derived by volume averaging. The self-similar solution proposed by Tsiberkin (2018) [ Transp. Porous Media 121(1):109–120] for streamwise-growing permeability is extended to include compressibility, heat conduction and a nonlinear drag. The velocity profile shows an inflection point at the free fluid-porous interfacial layer, below which it decreases to zero. A marked reduction of the adiabatic recovery temperature of the fluid and the velocity gradient at the interface is observed for high porosity, large grains and relatively high Mach numbers. The temperature imposed at the bottom of the porous substrate has a negligible influence on the shear stresses. Accepted for publication on Physical Review Fluids 1 Introduction Fluid flows over saturated porous media are common in industrial and engineering contexts [ 1 , 2 , 3 , 4 , 5 ] . Several theoretical, numerical and experimental studies have focused on the coupling between a free fluid and an adjacent saturated porous medium in confined geometries [ 6 , 7 , 8 ] and on wall-bounded flows through a semi-infinite porous medium [ 9 , 10 , 11 ] . Much less attention has been devoted to the coupling between an unbounded fluid and a porous medium. [ 2 ] studied the effects of a porous substrate on the heat transfer and the drag exerted by an overflowing fluid subject to a streamwise pressure gradient. They solved the steady, two-dimensional Navier-Stokes equations with a Darcy term and a Forchheimer term. The boundary-layer approximation was not imposed and the governing equations were elliptic, yet their results featured a marked parabolic character. [ 3 ] modeled the influence of a uniform porous substrate on an incompressible Blasius boundary layer by expanding the streamfunction in a power series of (K^{\ast}/x^{\ast})^{1/2} , where x^{\ast} is the streamwise coordinate and K^{\ast} is a sufficiently small permeability. They implicitly assumed continuity in the velocity and shear stresses across the fluid-porous interface [ 12 ] . Using a similar approach, [ 4 ] proposed a theoretical model for an incompressible laminar boundary layer over a porous flat plate and adopted the interfacial conditions of [ 13 ] . The pores were assumed to be small enough for the non-Darcian effects to be negligible below the interface. Theoretical and numerical analyses of compressible flows within porous media have drawn much less attention. [ 14 ] used the volume-averaging approach [ 15 , 16 ] to study the effect of choking and included the Darcy, Forchheimer and inertial terms in his analysis. The different roles of the advection and Forchheimer terms in compressible flows were also discussed by [ 17 ] . Porous substrates have been used to delay boundary-layer transition to turbulence in supersonic wind tunnels [ 18 , 19 , 20 ] . However, most studies have focused on the attenuation of small-amplitude acoustic disturbances in flat-plate boundary layers rather than the modification of the velocity profiles of the laminar base flows [ 19 ] . The modelling and computation of boundary-layer flows over and within porous surfaces of constant thickness and uniform permeability pose significant challenges, primarily because the thickness of the boundary layer grows downstream. Self-similar solutions cannot be derived when uniform porous substrates are considered [ 2 , 11 ] . The streamwise-marching computations have relied on the existence of a self-similar solution upstream [ 21 , 22 ] . A similarity solution was found by [ 5 , 23 , 24 ] for the case of an incompressible boundary layer on a porous substrate of infinite thickness and streamwise-increasing permeability. His analysis did not take the nonlinear Forchheimer term into account. He concluded that neither the Brinkman nor the advection term can be neglected without losing important features of the momentum transfer and interfacial stability. Albeit stemming from an idealized setting, self-similar and local-similarity solutions permit to overcome all these issues and to unravel physical mechanisms that are relevant to more realistic scenarios, particularly when the effects of compressibility are important [ 25 , 26 ] . The central aim of the present work is to extend Tsiberkin’s solution to high-speed boundary layers. For the first time, the governing equations are derived by volume averaging and the effects of nonlinear drag, compressibility and heat conduction are found numerically. 2 Mathemetical framework Figure 1 : Schematic of the microscopic structure of the porous substrate. On the left side, a cubic REV (green) of volume \Omega_{0}^{\ast}=8(d_{g}^{\ast}+d_{f}^{\ast})^{3} is placed within an array of uniformly-spaced solid grains (blue cubes) of size d_{g}^{\ast} and inter-grain distance d_{f}^{\ast} . On the right, the volume of fluid enclosed by the REV is shown (green). The fluid and solid volume fractions, \Omega_{f}^{\ast} and \Omega_{s}^{\ast} , are also drawn along with the fluid-solid interface surface (\partial\Omega_{fs})^{\ast} and the portion of the external surface of the REV occupied by the fluid (\partial\Omega_{f})^{\ast} . The focus is on a two-dimensional, steady air flow over the top flat surface of an isotropic and uniform porous substrate. The substrate lies above a solid impermeable surface and is saturated with air. The governing equations for the fluid phase are derived by volume averaging the compressible Navier-Stokes equations [ 27 , 28 , 15 , 16 , 29 ] . The averaged macroscopic fluid quantities result from an upscaling process as the microscopic quantities are smoothed by applying a spatial filter \overline{m}^{\ast} over a representative elementary volume (REV) that encloses portions of the fluid domain and the solid matrix. All dimensional quantities are denoted by the superscript \ast . When the top-hat filter \overline{m}^{\ast}=1/\Omega_{0}^{\ast}\,\left[$\mathrm{m}$\right] [ 30 , 31 ] is used (where \Omega_{0}^{\ast} is the total volume of the REV), the intrinsic volume average of the fluid phase within the REV is \left\langle\cdot\right\rangle_{f}=1/\Omega_{0}^{\ast}\int_{\Omega_{0}^{\ast}}[\cdot]\mathrm{d}\Omega^{\ast} . The ratio of the fluid volume to the total volume of the REV defines the volume porosity \theta_{f}=\Omega_{f}^{\ast}/\Omega_{0}^{\ast} . The surface porosity is the ratio \theta_{\partial ff}=(\partial\Omega_{f})^{\ast}/(\partial\Omega_{0})^{\ast} , where (\partial\Omega_{f})^{\ast} is the portion of the external surface of the REV wetted by the fluid phase and (\partial\Omega_{0})^{\ast} is the total external surface of the REV. A porous substrate with the ordered microstructure is considered (refer to figure 1 ). A cellular filter, which results from the double convolution of the top-hat filter, is employed [ 30 , 31 , 6 ] . The averaged macroscopic quantities are defined at the centroid of the REV and vary continuously across an interface of finite thickness at the top boundary of the substrate. To simplify the notation, the normalized filter m=\overline{m}^{\ast}\Omega_{0}^{\ast} and the ratio \Sigma_{fs}^{\ast}=(\partial\Omega_{fs})^{\ast}/\Omega_{0}^{\ast}\,\left[${\mathrm{m}}^{-1}$\right] are introduced, where (\partial\Omega_{fs})^{\ast} is the fluid-solid interface surface within the REV [ 28 ] . The averaging operators read \displaystyle\left\langle\left[\cdot\right]\right\rangle_{f}=\frac{1}{\Omega_{0}^{\ast}}\int_{\Omega_{0}^{\ast}}m\left[\cdot\right]\,\mathrm{d}\Omega^{\ast}, (1a) \qquad\displaystyle\left\langle\left[\cdot\right]n_{j}\right\rangle_{\partial fs}\Sigma_{fs}^{\ast}=\frac{1}{\Omega_{0}^{\ast}}\int_{\left(\partial\Omega_{fs}\right)^{\ast}}m\,\left[\cdot\right]n_{j}\,\mathrm{d}\left(\partial\Omega^{\ast}\right), (1b) and the quantities are decomposed as the sum of their volume-averaged and fluctuating parts, \left[\cdot\right]=\left\langle\left[\cdot\right]\right\rangle_{f}+\widetilde{\left[\cdot\right]} , with \langle\widetilde{\left[\cdot\right]}\rangle_{f}=0 [ 32 ] . The flow is described in a Cartesian frame of reference, where x^{\ast} and y^{\ast} define the streamwise and wall-normal coordinates, respectively. The intrinsic average of the gradient (or the divergence)