High-sensitivity Optical Microcavity Acoustic Sensor Covering Free Spectral Range

Qi Song, Hongjing Li, Chengxi Yu, Ding Wang, Xingyu Wu, Zhiqiang Liu, Jingzheng Huang, Chuan Wang, Guihua Zeng · 2025

Read High-sensitivity Optical Microcavity Acoustic Sensor Covering Free Spectral Range by Qi Song, Hongjing Li, Chengxi Yu, Ding Wang, Xingyu Wu, Zhiqiang Liu, Jingzheng Huang, Chuan Wang, Guihua Zeng (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-10229.txt.

Introduction

Qi Song and co-authors build a sound sensor from a tiny optical ring in a 2025 paper. Sound waves nudge the ring's light pattern, called a whispering gallery mode, and those shifts reveal the sound. Such sensors are very sensitive, but they can track only a narrow range of shifts, which limits their use. The team add a light-splitting setup with a selection step that stretches the range to the ring's full repeat span.

Tests show the design beats the standard readout by a wide margin. Sensitivity rose by a large factor, and the weakest sound the sensor can catch fell to one twenty-sixth of the old floor. Adding special light states and a mixing readout lifts the response further. The sensor suits weak, changing signals.

Catalog record

CREATORQi Song, Hongjing Li, Chengxi Yu, Ding Wang, Xingyu Wu, Zhiqiang Liu, Jingzheng Huang, Chuan Wang, Guihua Zeng
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-10229

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

High-sensitivity Optical Microcavity Acoustic Sensor Covering Free Spectral Range Preprint: APS/123-QED Qi Song, Hongjing Li, Chengxi Yu, Ding Wang, Xingyu Wu, Zhiqiang Liu, Jingzheng Huang, Chuan Wang, Guihua Zeng Abstract Optical whispering gallery mode microcavity acoustic sensors have emerged significant potential in high-sensitivity acoustic signal detection, but the narrow dynamic range limits the application prospect. To address the challenge, we propose and experimentally demonstrate a high-sensitivity acoustic sensor in optical whispering gallery mode microcavity. The proposed sensor integrates an extended Mach-Zehnder polarization interferometer with postselection, extending the dynamic range to the free spectral range. The sensing regions can be categorized into phase-drastic and phase-enhanced regions, both of which yield an optimal acoustic response that surpasses traditional transmission method. Experiment results demonstrate improvements of 57.87 dB in detection sensitivity and 26 times in minimal detectable acoustic pressure over the transmission method. Moreover, the application of coherent state and heterodyne detection can enhance response amplitude, further improving the detection sensitivity. Given the wide application range for acoustic dispersion and dissipation response, as well as the performance advantages of high sensitivity and wide dynamic range, the proposed WGM sensor offers a promising solution for acoustic sensing. Potentially, the structural design may be adaptable to other application scenarios involving time-varying signals through optical microcavity sensing. I Introduction Acoustic sensors detect external changes by analyzing the characteristics of acoustic or mechanical waves, including velocity, amplitude, frequency, and phase Vellekoop 1998 ; Drafts 2001 , which have been found significant applications in scientific research Barish 2018 ; Walter et al. 2020 ; Wu et al. 2017 ; Chaplin and Miglio 2013 ; Pelling et al. 2004 ; Zhang et al. 2021a ; Tang et al. 2023 , daily life Wang et al. 2015 ; Ma et al. 2022 ; Sun et al. 2023 ; Attia et al. 2019 ; Weber et al. 2016 , and industrial production Kotzé et al. 2016 ; Fischer 2016 ; Dwivedi et al. 2018 , such as inherent vibrational spectra identification, photoacoustic imaging, non-destructive inspection, etc. Piezoelectric acoustic sensors, which convert acoustic or mechanical signals to electric signals via piezoelectric effect, are relatively mature and commonly used. However, the noise equivalent pressure (NEP) and spatial resolution are constrained by the sensor size, while the working bandwidth is restricted by the resonant frequency of the sensor material, resulting in a limited application prospect Guggenheim et al. 2017 . Alternatively, optical acoustic sensors, including optical interferometer Wang et al. 2019 ; Chang et al. 2020 ; Li et al. 2018 and optical microcavity Vahala 2003 ; Cao et al. 2024 , providing a promising solution by transforming mechanical or acoustic waves as optical signals for the advantages of enhanced sensitivity, anti-electromagnetic interference performance, and integration capability Guggenheim et al. 2017 ; Cao et al. 2024 . Especially, whispering Gallery Mode (WGM) microcavities with ultrahigh quality factor ( Q factor) and small mode volume, significantly enhance light-matter interactions and markedly improve sensing sensitivity Foreman et al. 2015 ; Jiang et al. 2020 ; Cao et al. 2024 ; Li et al. 2021 , which have garnered extensive attention, and demonstrated substantial potential in acoustic signal sensing applications Anetsberger et al. 2009 ; Kim et al. 2017 ; Basiri-Esfahani et al. 2019 ; Yang et al. 2020 ; Pan et al. 2020 ; Shnaiderman et al. 2020 ; Westerveld et al. 2021 ; Sun et al. 2022 ; Meng et al. 2022 ; Tu et al. 2022 ; Yang et al. 2023 ; Xing et al. 2023 ; Tang et al. 2023 ; Sun et al. 2023 . Figure 1: Conceptual design and sensing mechanism of the postselected WGM acoustic sensor. (a) Diagram of the postselected WGM acoustic sensor. FC is fiber coupler, and PBS is polarization beam splitter. (b) The relationship among I/I_{0} , \varphi(t) , and \Delta\omega in under-coupled, critical-coupled, and over-coupled regimes, respectively. In simulation, the postselection angle is 0.05 rad, resonant wavelength is 1550 nm, and Q factor is at the level of 10 8 . Under-coupled regime: \kappa_{0}= 0.6 MHz, \kappa_{e}= 0.2 MHz; Critical-coupled regime: \kappa_{0}= 0.6 MHz, \kappa_{e}= 0.6 MHz; Over-coupled regime: \kappa_{0}= 0.6 MHz, \kappa_{e}= 1.0 MHz. Previous researches on WGM acoustic sensors focus on achieving higher sensitivity by employing WGM microcavities with higher Q factor, and acoustic signals can be retrieved by transmission method that tracks the transmission change of single cavity mode with probe light at a fixed wavelength around the resonant frequency Foreman et al. 2015 ; Jiang et al. 2020 ; Cao et al. 2024 ; Li et al. 2021 . The high Q factor leads to a narrow bandwidth of at most twice full width at half maxima (FWHM), and enables highly sensitive detection of minute transmission changes, so that the dynamic range of the WGM microcavity is reduced by one-thousandth to ten-thousandth of the free spectral range (FSR) of different WGM microcavities with Q factor of 10 8 . In practical applications, unknown and stochastic acoustic signals may cause resonant shift exceeding the dynamic range, leading to information loss, and rendering the transmission method ineffective Liao and Yang 2021 . Multimode sensing method may provide a solution with larger dynamic range and less uncertainty, but applicability in acoustic signal sensing is restricted by the sweep period of the tunable laser, or the integration time of the spectrometer Liao and Yang 2021 ; Duan et al. 2022 ; Lu et al. 2021 ; Zhang et al. 2021b . In this paper, a high-sensitivity optical WGM microcavity acoustic sensor within FSR is proposed and experimentally demonstrated by utilizing an extended Mach-Zehnder polarization interferometer with postselection. Based on the relationship between phase characteristic and coupling strength, the sensing regions of the proposed approach can be divided into phase-drastic and phase-enhanced regions, and the optimal acoustic response exceeds that of traditional transmission method. In verification experiment, a 57.87 dB improvement in detection sensitivity, and a 26-fold enhancement in minimal detectable acoustic pressure (MDAP) over the transmission method is observed with the same devices. Additionally, the employment of coherent states and heterodyne detection can further enhance the response amplitude, potentially enabling the sensitivity up to the sub-micropascal level. The proposed WGM sensor provides a promising solution with high sensitivity and wide dynamic range for acoustic sensing, and the structure may also be applicable to other time-varying signal sensing via WGM microcavities, opening up various application scenarios. II Conceptual design and sensing mechanism In order to realize the measurement of acoustic signal with wide dynamic range and high sensitivity based on optical microcavity, we propose a WGM acoustic sensor via extended polarization Mach-Zehnder interferometer with postselection, hereafter referred to as “the postselected WGM acoustic sensor”. As depicted in Fig. 1 (a), the sensing procedure can be divided into four steps, i.e., polarization modulation, sensing with WGM acoustic sensing unit, postselection and detection. In polarization modulation, the probe light is modulated as a linear polarization state of 45°. Different from previous researches, the WGM acoustic sensing unit is combined with a polarization Mach-Zehnder interferometer, where the coupled WGM microcavity is situated at the signal arm. Under the influence of the acoustic signal, the transmission and phase characteristics of the WGM microcavity change, resulting in difference between the signal arm

Read the complete text