Sub-THz Power Amplifiers: Measurements, Behavioral Modeling and Predistortion Algorithms

Lutfi Samara, Simon Haussmann, Erind Tufa, Antonio Alberto D’Amico, Tommaso Zugno, Ingmar Kallfass, Thomas Kürner · 2025

Read Sub-THz Power Amplifiers: Measurements, Behavioral Modeling and Predistortion Algorithms by Lutfi Samara, Simon Haussmann, Erind Tufa, Antonio Alberto D’Amico, Tommaso Zugno, Ingmar Kallfass, Thomas Kürner (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2508-09545.txt.

Introduction

Lutfi Samara and six co-authors measure and model power amplifiers that work in the sub-terahertz band, and give ways to undo the warp they add to signals. Their paper is from two thousand twenty-five.

World data traffic is set to grow ten to a hundred times in a decade, and this high band could help carry it. But amplifiers in this band bend signals, in height and in phase. That warp hurts most with waveforms whose peaks tower over their mean. The team sets out how such amplifiers act, builds a model of that act, and gives pre-fix methods that clean the signal before it is sent.

Catalog record

CREATORLutfi Samara, Simon Haussmann, Erind Tufa, Antonio Alberto D’Amico, Tommaso Zugno, Ingmar Kallfass, Thomas Kürner
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE52 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2508-09545

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Sub-THz Power Amplifiers: Measurements, Behavioral Modeling and Predistortion Algorithms Thanks: This work has been performed in part in the framework of the HORIZON-JU-SNS-2022 project TIMES, co-funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Lutfi Samara, Simon Haussmann, Erind Tufa, Antonio Alberto D’Amico, Tommaso Zugno, Ingmar Kallfass, Thomas Kürner Abstract With global IMT traffic expected to grow 10-100 times from 2020 to 2030 1 1 1 Forecasts are reported in [ 1 ] . , the Terahertz (THz) spectrum offers a promising solution to satisfy such forecasts. However, occupying the THz spectrum comes with its own challenges, an important one being impairments caused by broadband RF components in THz transceivers. Nonlinearities in power amplifiers (PAs) complicate meeting link budget requirements, with amplitude and phase distortions degrading the system’s performance, especially when adopting waveforms with high peak-to-average power ratios (PAPRs), such as Orthogonal Frequency Division Multiplexing (OFDM) . In this paper, we present characterization results of a 300 GHz PA using small-signal and large-signal continuous-wave measurements. Models capturing Amplitude-to- Amplitude Modulation (AM-AM) and Amplitude-to-Phase Modulation (AM-PM) behavior across 270-330 GHz are developed and verified with wideband measurements, confirming the compression behavior, while nonetheless showing inaccuracies for low input powers due to unaccounted frequency dependencies. Based on the derived models, a predistortion algorithm is designed and analyzed, revealing significant error performance degradation when switching between single- and multi-carrier waveforms. We finally show that an appropriate selection of predistorter parameters can significantly improve the performance. I Introduction Terahertz (THz) frequency bands are currently considered as a means to satisfy the always increasing demand for higher data rates and overcome the spectrum scarcity problem faced by traditional wireless systems [ 2 ] . The International Telecommunication Union (ITU) already identified a total of 137 GHz between 275 and 450 GHz for mobile and fixed services, and further concessions are expected in the near future [ 3 ] . The wide bandwidth available at these frequencies can be exploited to deliver extremely high communication performance, achieving data rates up to terabits-per seconds and ultra-low latency. Thanks to the enhanced directionality, THz systems can reduce interference and achieve higher spatial reuse. In addition, the small size of antennas at these frequencies enables the fabrication of compact transceivers suitable for small-scale applications. Further, the short wavelength and unique propagation properties of THz signals make them ideal for precise sensing and localization, positioning this technology as a promising candidate for implementing integrated sensing and communication functionalities. The sub- THz technology has already been considered for establishing point-to-point and short range wireless connections. The IEEE developed a standard operating between 252 and 325 GHz and supporting channel bandwidths up to 69 GHz [ 4 ] . The target applications include wireless front/backhauling, wireless data centers, kiosk downloading, and intra-device communications. Other potential use cases have been identified by different research and industrial initiatives, including cooperative mobile robots, eXtended Reality (XR) , wireless data centers, real-time industrial control at the edge, and virtual commissioning of industrial plants with hardware in the loop [ 5 , 6 , 2 ] . The exploitation of this frequency range comes with a set of challenges, including harsh and variable propagation conditions experienced over wireless channels and pronounced hardware impairments faced by sub- THz components. In [ 7 ] , several impairments have been analyzed, including oscillator phase noise, antenna beamsquinting, and power amplifier non-linearities. If not properly treated, such defects can limit the achievable performance and hinder the full exploitation of the sub- THz frequency bands. In this regard, the Power Amplifier (PA) is one of the most critical components in the Radio Frequency (RF) chain. Ideally, the PA should increase the power of the modulated signal. However, PAs operating at sub- THz frequencies exhibit pronounced non-linearity effects, leading to unwanted signal distortion when operating at high power levels. On the other hand it is advantageous to operate the PA near the compression region due to increased power efficiency. This is particularly relevant when adopting multi-carrier waveforms such as OFDM , in which large amplitude fluctuations in the modulated signal – high Peak-to-Average Power Ratio (PAPR) – may strain the PA and cause significant distortion. Moreover, when operating over wide bandwidths, PAs may exhibit memory effects which further distort the input signal. These effects can be compensated by adopting linearization techniques such as signal predistortion, which applies an inverse transformation to the input signal in the baseband domain before entering the power amplification stage. The first step for implementing this technique is to evaluate the non-linear behavior of the PA and develop suitable amplitude and phase distortion models. A common approach is to conduct measurement for characterizing the PA device and use the empirical data to extract suitable behavioral models describing the input-output relationships. I-A Pre-existing models and prior art For the evaluation of the NR waveform performance, the 3GPP adopted the polynomial model described in [ 8 ] . Although it has been derived from empirical measurements at sub-6 GHz, this model has been recommended by 3GPP also for carrier frequencies above 6 GHz. Since it has been derived from measurements with input power between -35 and 9 dBm, it may not provide accurate results outside this range. An alternative Rapp model for above-6 GHz evaluations was proposed in [ 9 ] , however, it was considered less appropriate than the sub-6 GHz polynomial model since, although being more accurate than a simple clipping model, the applicability of the Rapp approach was questioned in the case of wideband operations. Metrology and device characterization in the sub- THz band is restricted mostly to Continuous Wave (CW) measurements or two-tone measurements. At high millimeter-wave frequencies, measurements are performed mostly indirectly with frequency extension modules or other frequency conversion units, while analyzing the data at much lower frequency. In [ 10 , 11 ] , authors measured the input-output relationship of a SiGe PA operating at 290 GHz. The results were used to derive the parameters of popular memoryless/quasi-memoryless models, including Rapp, Ghorbani, White, and Saleh models. The authors claim that the Rapp model provides the best trade-off between accuracy and model validity, as it shows a meaningful behavior for input power levels outside of the measurement range. Recently, the European Telecommunications Standards Institute (ETSI) has established an industry specification group on the topic of THz , named ETSI ISG THz, where in a recently published report on RF impairments [ 7 ] , it extended the modified Rapp model proposed in [ 9 ] by collecting the performance metrics of several sub- THz PAs operating between 100 and 200 GHz that are available in the literature. The collected data was used to derive the parameters of the average AM-AM distortion characteristic. The non-linear PA behavior is considered as a key issue for enabling efficient and reliable THz /sub- THz communications [ 12 , 13 ] . Previous works compared the performance of different Physical (PHY) layer waveforms under PA non-idealities. The Rapp model proposed by 3GPP was used in [ 14 ] and [ 15 ] for the evaluation of different single and multi-carrier waveforms. In [

Read the complete text